Citations with the tag: HEATING -- Control

Results 1 - 50

  • Minimizing piping temperature variations.
    Sandberg, Chet // Process Heating; Jul/Aug97, Vol. 4 Issue 6, p24 

    Discusses the use of electric heat tracing cable in minimizing pipe temperature variations. Rising popularity of self-regulating electric heat tracing; Heat loss at valves and supports; Proportional ambient sensing control; Comparison with steam racing.

  • Specifying controls for hot water heating systems.
    Carron, Sean // PM Engineer; May96, Vol. 2 Issue 4, p28 

    Discusses the specification of controls for the operation of a building hydronic heating system. Main goals in the design of a hydronic control system; Boiler protection; Space temperature control; Mixing reset; Equal percentage valve; Boiler staging; Advantage of a multiple boiler system;...

  • Heats water-miscible fluids.
    Carron, Sean // Chemical Business; Apr97, Vol. 10 Issue 9, p72 

    Presents the Engineered Heating Systems for heating water-miscible liquids and slurries. Capabilities of the Engineered Heating Systems; Applications of the liquid heating systems; Temperature control of the system.

  • How to control snow- and ice-melting systems.
    Fiedrich, Joe // Contractor Magazine; Nov95, Vol. 42 Issue 11, p28 

    Focuses on the basic control requirements needed for exterior surface heating, or snow melting systems. Automatic snow and ice detection controls; Critical commercial applications of controls; Maximum system supply water temperature protection; Minimum system return water temperature protection.

  • 15 rules for control wiring for low-temperature systems.
    Fiedrich, Joe // Contractor Magazine; Dec96, Vol. 43 Issue 12, p32 

    Presents basic rules in control wiring of two-wire thermostats. Need for familiarizing with low voltage wiring; Learning basic terminologies; Recommended materials.

  • Tuning open-loop systems, part 2.
    Erickson, Jim // Process Heating; Jul/Aug96, Vol. 3 Issue 6, p74 

    Part II. Discusses the equations to tune controllers of process heating systems. Calculations for the reset and rate-mode tuning; Measurement of deadtime and response through open-loop and closed-loop methods.

  • Heat Controller plans training for its suppliers and dealers.
    Erickson, Jim // Air Conditioning Heating & Refrigeration News; 7/5/93, Vol. 189 Issue 10, p10 

    Features the hvac training program offered by Heat Controller Inc. in conjunction with the Northamerican Heating & Airconditiong Wholesalers Association (NHAW). Courses offered on heating, cooling and electricity; Contact information.

  • Radiant hot-water heating.
    Henkenius, Merle // Popular Mechanics; Jan97, Vol. 174 Issue 1, p78 

    Illustrates the use of in-floor radiant heating, a hydronic system in homes. Limitations of its usage; Difference of radiant heating system from other heating systems; Components of the hydronic heating system; Radiant-floor heating installation in homes; Cost of the heating system; Retrofits...

  • Wood-fired Central Heat.
    Pahl, Greg // Mother Earth News; Feb/Mar2003, Issue 196, p108 

    Discusses wood-fired central heating systems. Background on forced-hot-air systems; Information on combination central heating units; Advantages offered by a hydronic, wood-fired central heating system. INSETS: Wood Furnaces and Boilers;Price Range.

  • Heat controller offers furnace protection plan.
    Pahl, Greg // Air Conditioning Heating & Refrigeration News; 9/6/93, Vol. 190 Issue 1, p2 

    Reports on Heat Controller Inc.'s parts and labor warranty program for its `UniCell 90' 90 percent-plus-AFGU gas furnace. Guardian Knight Protection Plan; Authorized dealers; Contact information.

  • Bagmaker.
    Pahl, Greg // Packaging Digest; Mar2012, Vol. 49 Issue 3, p16 

    The article offers brief information on the Atlas-202 flexible bagmaker from Heat and Control Inc.

  • Prepared Foods Production.
    Pahl, Greg // National Provisioner; Jul2012, Vol. 226 Issue 7, p57 

    The article offers brief information on Heat and Control Inc.'s AirForce impingement oven.

  • Heat Controller, Inc.
    Pahl, Greg // Air Conditioning Heating & Refrigeration News; 1/25/93, Vol. 188 Issue 4, p10 

    Announces the appointment of representatives for the heating and air conditioning lines of Heat Controller Inc. Tony Iozzo, Pinnacle Sales Co., for Colorado, New Mexico, parts of western Texas, Utah and Wyoming; Jerry Williston and Ed Allen, Williston-Allen Associates Inc., for Connecticut,...

  • HORNO DE IMPACTO ECON�MICO Y COMPACTO.
    Pahl, Greg // Industria Alimenticia; jul2012, Vol. 23 Issue 7, p64 

    No abstract available.

  • Gila Titanium Heat Control Window Film.
    Pahl, Greg // Home Channel News; 10/4/2010, Vol. 36 Issue 10, p57 

    A preview of the Titanium Heat Control Window Film from Gila Film Products is presented.

  • Control flywheel effect of radiant heating systems.
    Fiedrich, Joe // Contractor Magazine; Jun94, Vol. 41 Issue 6, p38 

    Discusses various aspects of the radiant floor heating systems. Controlling the flywheel effect of high mass floor systems; Use of water circulation; Zone controls.

  • The case for electronic case controls.
    Lewis, Robert J. // Air Conditioning Heating & Refrigeration News; 7/29/96, Vol. 198 Issue 13, p14 

    Focuses on the benefits of using electronic case controls for heating, ventilation and air conditioning (HVAC) systems. Includes improvement in temperature control; Consistency in superheat control; Lower head pressures.

  • Territory Changes.
    Lewis, Robert J. // Air Conditioning Heating & Refrigeration News; 2/28/2011, Vol. 242 Issue 9, p7 

    The article reports on the announcement from Heat Controller Inc. regarding the realignments of its three sales territory including Cain Sales Co. which will cover Florida for Comfort-Aire products, the expansion of Texas Reps to include the whole state of Oklahoma and Texas, and the addition of...

  • Heat and Control Inc.
    Lewis, Robert J. // Prepared Foods; Oct97, Vol. 166 Issue 11, p82 

    Reports on a flame searing system offered by Heat and Control Incorporated. Features of the system; Advantages of the system to barbequers.

  • Conveyor.
    Lewis, Robert J. // National Provisioner; Jul2011, Vol. 225 Issue 7, p53 

    The article offers brief information on the Progressive Pack Conveyor from Heat and Control Inc.

  • Heat Controller names Peck vp, sales, marketing.
    Lewis, Robert J. // Air Conditioning Heating & Refrigeration News; 6/17/96, Vol. 198 Issue 7, p32 

    Reports on Donald Peck's appointment as vice president for sales and marketing for Heat Controller Inc. Career background; Duties and responsibilities.

  • Weigher.
    Lewis, Robert J. // Packaging Digest; Mar2011, Vol. 48 Issue 3, p15 

    The article offers brief information on the CCW-R-218WB double weigher from Heat and Control Inc.

  • Managing Data-Center Heat Density.
    Baer, Dan // Heating/Piping/Air Conditioning Engineering; Feb2004, Vol. 76 Issue 2, p44 

    Focuses on the effective management of heat densities of data-centers. Heat densities that an average data center can handle; Remedy taken by data center managers, engineers and heating, ventilating and air-conditioning contractors when heat densities increase; Solutions and approaches to be...

  • Oil Prices Too Hot to Handle.
    Baer, Dan // Business NH Magazine; Nov2005, Vol. 22 Issue 11, p12 

    Presents the oil conservation tips recommended by the New Hampshire Office of Energy and Planning. Insulation of attics and walls; Inspection of heating system; Reduction of thermostat setting when everyone is asleep or away from the home.

  • NEW IMPINGEMENT OVEN COOKS FASTER AND SAFER.
    Baer, Dan // National Provisioner; Jan2001, Vol. 215 Issue 1, p96 

    Features Airforce, an impingement oven from Heat and Control Inc. in Hayward, California. Production capacity; Specifications; Usability.

  • Understanding PID and fuzzy logic control.
    Clark, Jim // Process Heating; Apr97, Vol. 4 Issue 3, p39 

    Talks about proportional integral-derivative (PID) and fuzzy logic control schemes for process heating. Different aspects of the total control function represented by the acronym PID; Tuning the proportional band; Tuning the integral band; Derivative band; Flexibility and quick response of...

  • METAL DETECTION.
    Clark, Jim // Food Engineering; Feb2009, Vol. 81 Issue 2, p25 

    The article evaluates the MS Series metal detectors from Heat and Control Inc.

  • SLOPE WEIGHER.
    Clark, Jim // Food Engineering; Feb2009, Vol. 81 Issue 2, p33 

    The article evaluates the Gentle Slope multihead weigher from Heat and Control Inc.

  • THERMAL FLUID-HEATED FRYER.
    Clark, Jim // Food Engineering; Mar2009, Vol. 81 Issue 3, p30 

    The article evaluates the MasterTherm thermal fluid-heated fryer from Heat and Control.

  • Mobile sample holder applying multiple heating systems with a variable heating and cooling rate.
    Leist, U.; Winkler, A.; B�ssow, J.; Ai-Shamery, K. // Review of Scientific Instruments; Nov2003, Vol. 74 Issue 11, p4772 

    A mobile sample holder applying multiple heating systems with variable heating and cooling opportunities will be presented. Design details and initial results will be given. The whole sample holder system consists of two units: the docking station (one) on which the mobile sample holder together...

  • Contractors need to know electronic controls.
    Patnode, Marvin // Air Conditioning Heating & Refrigeration News; 7/31/95, Vol. 195 Issue 14, p27 

    Reports on electronic controls for heating, ventilation and air conditioning systems. Development of direct digital control devices; Advantages of electronic controls; Savings opportunities.

  • Rotary brander.
    Patnode, Marvin // Food Manufacturing; Feb2000, Vol. 14 Issue 2, p1 

    No abstract available.

  • Fryer.
    Patnode, Marvin // National Provisioner; Jul2009, Vol. 223 Issue 7, p47 

    The article evaluates the MasterTherm continuous fryer from Heat & Control Inc.

  • Fryer.
    Patnode, Marvin // National Provisioner; Sep2011, Vol. 225 Issue 9, p96 

    No abstract available.

  • IBIE EXHIBITOR SHOWCASE.
    Patnode, Marvin // Snack Food & Wholesale Bakery; May2007, Vol. 96 Issue 5, pIBIE3 

    The article presents a corporate profile for Heat and Control Inc., a full-service international supplier of efficient and economical equipment and machinery for baked products and snacks in Hayward, California.

  • Flexibility keeps poultry line cooking.
    Patnode, Marvin // Food Engineering; Sep2000, Vol. 72 Issue 9, p16 

    Reports on meat processor Koch Foods' installation of Heat and Control Inc.'s AirForce impingement oven for its poultry plant in Fairfield, Ohio. AirForce oven's production of higher yields and faster cooking times than comparable impingement ovens; Inclusion of two batter applicators and two...

  • Data Management.
    Patnode, Marvin // National Provisioner; Aug2011, Vol. 225 Issue 8, p65 

    The article offers brief information on the ITM-Plant iT control system from Heat and Control Inc.

  • Vertical form fill seal machine.
    Patnode, Marvin // Manufacturers' Monthly; Jun2006, p58 

    The article evaluates the KBF-6000 Series vertical form fill seal machine from Heat & Control Inc. and offers information on its key features, reliability of its package seals and maintenance operation.

  • High traction conveyor.
    Patnode, Marvin // Manufacturers' Monthly; Jun2006, p60 

    The article evaluates the uni XLB K318 high traction conveyor from Heat & Control Inc. and offers information on the key features of its skid systems and the advantages of its positive sprocket drive.

  • Plastic modular conveyor belt.
    Patnode, Marvin // Manufacturers' Monthly; Jun2006, p61 

    The article evaluates the M-PNB M1 Snap Link plastic modular conveyor belt from Heat & Control Inc. and offers information materials used to build this belt, capacity to improve conveyor performance and reduce operating costs, and applications in food and fish processing.

  • Tortilla sheeter controls roll gap by product piece weight.
    Patnode, Marvin // Food Manufacture; Jul2008, Vol. 83 Issue 7, p77 

    The article evaluates the Paragon automatic weight control sheeter from Heat and Controls Inc.

  • Century.
    Patnode, Marvin // Air Conditioning Heating & Refrigeration News; 4/30/2012, Vol. 245 Issue 18, p12 

    The article evaluates the VMH36SC ductless mini-split heat pump from Heat Controller Inc.

  • INTRODUCING OMCO THERMAL CUT-OFFS.
    Patnode, Marvin // Fuel Oil News; Sep2012, Vol. 77 Issue 9, p12 

    The article features the Thermal Cut-offs from OMCO.

  • TRANSPORTADORA VERSATIL Y PRECISA.
    Patnode, Marvin // Industria Alimenticia; mai2009, Vol. 20 Issue 5, p52 

    No abstract available.

  • DISTRIBUTION CONVEYOR.
    Patnode, Marvin // Food Engineering; Nov2008, Vol. 80 Issue 11, p25 

    The article features the FastBack 90E horizontal distribution conveyor from Heat and Control, Inc.

  • Uniform Impingement Cooking.
    Patnode, Marvin // Processing (08968659); Feb2010, Vol. 23 Issue 2, p23 

    The article evaluates the AirForce impingement oven from Heat and Control Inc.

  • On The Hush.
    Patnode, Marvin // Chem.info; Aug2008, Vol. 46 Issue 7, p21 

    The article evaluates the FastBack 260E horizontal motion sanitary conveyor from Heat and Control Inc.

  • Modular conveyors save installation time, money.
    Patnode, Marvin // Food & Beverage Packaging; Jan/Feb2010, Vol. 74 Issue 1, p40 

    The article evaluates the Rapid Deployment platform systems from Heat & Control Inc.

  • Oil Cooler Module.
    Patnode, Marvin // National Provisioner; Feb2012, Vol. 226 Issue 2, p66 

    The article offers brief information on the Oil Cooler Module from Heat and Control Inc.

  • Heat Controller agrees to buy WeatherKing.
    Patnode, Marvin // Air Conditioning Heating & Refrigeration News; 12/11/95, Vol. 196 Issue 15, p3 

    Reports that Heat Controller Inc. has acquired Addison Products' WeatherKing Division in Orlando, Florida. Combination of the companies' marketing and manufacturing strengths.

Next 50 Results
Share

Buzz

Other Topics