TITLE

scintigram

PUB. DATE
January 2005
SOURCE
Taber's Cyclopedic Medical Dictionary;2005, p1956
SOURCE TYPE
Book
DOC. TYPE
Reference Entry
ABSTRACT
A definition of the term "scintigram" is presented. It refers to the record produced by a scintiscan.
ACCESSION #
21245004

 

Related Articles

  • Transient responses of a piezoelectric tube scanner. Yang, Shengyuan; Huang, Wenhao // Review of Scientific Instruments;Dec1997, Vol. 68 Issue 12, p4483 

    Presents the exact equations of motion of the scanner in treating the electric signals applied to piezoelectric tube scanner for scanning probe microscopy. Solution method and process in solving the equations; Usefulness of the solutions for the design and analysis of a scanning probe microscope.

  • Subwavelength imaging based on frequency scanning. Maslovski, Stanislav; Alitalo, Pekka; Tretyakov, Sergei // Journal of Applied Physics;Nov2008, Vol. 104 Issue 10, p103109 

    A new principle of subwavelength imaging based on frequency scanning is considered. It is shown that it is possible to reconstruct the spatial profile of an external field exciting an array (or coupled arrays) of subwavelength-sized resonant particles with a frequency scan over the whole band of...

  • scintiscan.  // Taber's Cyclopedic Medical Dictionary;2005, p1956 

    A definition of the term "scintiscan" is presented. It refers to the use of scintiphotography to create a map of scintillations produced when a radioactive substance is introduced into the body. The differential accumulation of a substance in the various parts of the body is indicated by the...

  • Compact large-range cryogenic scanner. Siegel, Jeffrey; Witt, Jeff; Venturi, Nais; Field, Stuart // Review of Scientific Instruments;Mar95, Vol. 66 Issue 3, p2520 

    Describes the construction and operation of a large-range piezoelectric scanner, suitable for various scanning probe microscopies such as magnetic force, atomic force and Hall probe microscopies. Focuses on as canning stage using piezo benders to scan over a range of a specific dimension at...

  • Non-conventional, inexpensive 3-D scanners for probe microscopy. Mariani, T.; Frediani, C.; Ascoli, C. // Applied Physics A: Materials Science & Processing;1998, Vol. 66 Issue 7, pS35 

    Abstract. This work was accomplished as a contribution to the development of inexpensive, simplified, easy-to-build SPM instruments for educational use. We designed and tested two different configurations of volume scanners based on piezoelectric audio transducers. Both scanners are driven by...

  • A simple technique for height calibration for z piezo with Angstrom resolution of scanning probe microscopes. Pal, S.; Banerjee, S. // Review of Scientific Instruments;Feb2000, Vol. 71 Issue 2, p589 

    We present a simple method of preparing a "calibration standard" of nanometer order for the height calibration of z piezo scanner used in scanning probe microscopes. The calibration standard can be accurately characterized using the grazing incidence x-ray reflectivity technique. This method...

  • Artifact-free near-field optical imaging by apertureless microscopy. Labardi, M.; Patane, S.; Allegrini, M. // Applied Physics Letters;7/31/2000, Vol. 77 Issue 5 

    A method for optical near field discrimination, leading to drastic artifact reduction in superresolved imaging by scanning interference apertureless microscopy is presented. The method relies on second harmonic detection of the modulated optical signal scattered by a vibrating silicon tip. An...

  • High resonance frequency force microscope scanner using inertia balance support. Fukuma, Takeshi; Okazaki, Yasutaka; Kodera, Noriyuki; Uchihashi, Takayuki; Ando, Toshio // Applied Physics Letters;6/16/2008, Vol. 92 Issue 24, p243119 

    We have developed the atomic force microscope scanner with the high resonance frequency of 540 kHz in the z axis using a piezosupport mechanism “inertia balance support.” In the method, a cubic piezoactuator is supported at the four sides perpendicular to the extension axis, by which...

  • Circular mode: A new scanning probe microscopy method for investigating surface properties at constant and continuous scanning velocities. Nasrallah, Hussein; Mazeran, Pierre-Emmanuel; Noël, Olivier // Review of Scientific Instruments;Nov2011, Vol. 82 Issue 11, p113703 

    In this paper, we introduce a novel scanning probe microscopy mode, called the circular mode, which offers expanded capabilities for surface investigations especially for measuring physical properties that require high scanning velocities and/or continuous displacement with no rest periods. To...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics