TITLE

midpoint load

PUB. DATE
April 2016
SOURCE
Computer Desktop Encyclopedia;Apr2016, p1
SOURCE TYPE
Encyclopedia
DOC. TYPE
Reference Entry
ABSTRACT
A dual-hub magnetic tape cartridge that is positioned at the middle of the tape to start. It enables faster searching than a single hub where all searches must start at the beginning. Magstar MP and the LTO Ultrium formats use this method.
ACCESSION #
114226869

 

Related Articles

  • Axial Stiffness and Torsional Effects in a 76 Mm Wire Rope: Experimental Data and Theoretical Predictions. Kraincanic, I; Hobbs, R E // Journal of Strain Analysis for Engineering Design (Professional ;1999, Vol. 34 Issue 1, p39 

    Some recent tests on a 6 × 41 wire rope of 76 mm diameter are reported. A specimen 7 m long whose ends were prevented from rotating was used with axial loads ranging up to 1.4 MN. Axial stiffnesses were measured, both for large load ranges and for small load perturbations superimposed on...

  • MIDPOINT.  // New Yorker;10/22/1955, Vol. 31 Issue 36, p166 

    The article reviews the book "MIDPOINT," by Isabella Holt.

  • Dynamic response of a rotating beam influenced a moving load and gyroscopic effect with Timoshenko beam model. Shahravi, Morteza; Temsal, Mohammad; Ghafari, Hamed; Azimi, Milad // Applied Mechanics & Materials;2016, Vol. 829, p118 

    This article is presents a finite element formulation for the dynamic response of a rotating simply supported shaft subjected to a moving load. The Timoshenko beam theory is used to model the rotating shaft. The assumed modes method and Finite Element method are employed in this study. The...

  • Interval dynamic response analysis of structures with interval parameters. Gao, W.; Zhang, N.; Ma, J.; Wang, X. B. // Proceedings of the Institution of Mechanical Engineers -- Part C;Mar2008, Vol. 222 Issue 3, p377 

    Dynamic response analysis of truss structures with interval parameters under interval loads are investigated using a new method called the interval factor method (IFM). Using the IFM, the structural physical parameters, geometric dimensions, and loads can be considered as interval variables. The...

  • Staring down the miles. Morton, Roger // Logistics Today;Mar2006, Vol. 47 Issue 3, p20 

    The article presents an interview with several trucking executives about the challenges motor carriers are facing in 2006 and what shippers need to focus on. Executive vice president of Werner Enterprises Inc.'s van division and international, Derek Leathers explains that the company use...

  • Prediction of Deformation of Circular Plates Subjected to Impulsive Loading Using GMDH-type Neural Network. Babaei, H. // International Journal of Engineering (1025-2495);Oct2014, Vol. 27 Issue 10, p1635 

    In this paper, experimental responses of the clamped mild steel, copper, and aluminium circular plates are presented subjected to blast loading. The GMDH-type (Group Method of Data Handling) neural networks are then used for the modelling of the mid-point deflection thickness ratio of the...

  • Numerical dynamic analysis of stiffened plates under blast loading. Tavakolia, H. R.; Kiakojourib, F. // Latin American Journal of Solids & Structures;Mar2014, Vol. 11 Issue 2, p185 

    Using the general purpose finite element package Abaqus, an investigation has been carried out to examine the dynamic response of steel stiffened plates subjected to uniform blast loading. The main objective of this study is to determine the dynamic response of the stiffened plates considering...

  • Optimal Location of Shunt FACTS Devices using Genetic Algorithm for Transmission Line Model. Dinesh, L.; Venkatesh, J. Uday; kiran, M. Santosh // Journal of Information Engineering & Applications;2014, Vol. 4 Issue 1, p1 

    FACTS devices are used for controlling transmission voltage, Power flow, dynamic response and reducing reactive losses in transmission lines. It has been proven that the midpoint of a transmission line is the optimal location for shunt FACTS devices and is based on the simplified line model,...

  • ABOUT A CONSTRUCTION PROBLEM. POP, OVIDIU T.; KISS, SÁNDOR N. // International Journal of Geometry;2014, Vol. 3 Issue 2, p14 

    In this paper, we study the construction of a polygon if we known the midpoints of their sides.

  • porion.  // Taber's Cyclopedic Medical Dictionary;2005, p1733 

    A definition of the term "porion" is presented. It is the midpoint of the upper portion of the auditory meatus.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics