April 2016
Computer Desktop Encyclopedia;Apr2016, p1
Reference Entry
(Kilo Packets Per Second) One thousand packets per second. See PPS.


Related Articles

  • Formation of Splats from Suspension Particles with Solid Inclusions Finely Dispersed in a Melted Metal Matrix. Solonenko, O. // Journal of Thermal Spray Technology;Dec2012, Vol. 21 Issue 6, p1135 

    A theoretical model has been developed to describe the splats formation from composite particles of several tens of micrometers in size whose liquid metal binder contains a high volume concentration of ultra-fine refractory solid inclusions uniformly distributed in the binder. A theoretical...

  • First Sikorsky CH-53K Enters Final Assembly. Nelms, Douglas // Rotor & Wing;8/15/2011, Vol. 45 Issue 8, p11 

    The article reports on the assembly of the CH-53K heavy-lift cargo helicopter from Sikorsky Aircraft Corp. in West Palm Beach, Florida. It mentions that the said prototype test aircraft is assembled with sponsons and main rotor pylon to its airframe. It notes that the aircraft will replace the...

  • Methodology for Estimation of Operational Availability as Applied to Military Systems. Pryor, Gary A. // ITEA Journal of Test & Evaluation;Dec2008, Vol. 29 Issue 4, p420 

    Operational availability (Ao) is an important consideration during the evaluation of system effectiveness and sustainability. Ao is sometimes specified as an attribute within military requirements documents, at the discretion of the proponent. Recently, however, the Chairman of the Joint Chiefs...

  • Spreading and solidification of metal-melt droplets under conditions of substrate submelting. Theory and model experiment. Solonenko, O.; Perfil'ev, A.; Smirnov, A. // Technical Physics Letters;Oct2013, Vol. 39 Issue 10, p917 

    Spreading and solidification of metal-melt droplets upon their collision with a surface are of particular interest for thermal spraying, molding, melt spinning for obtaining amorphous and microcrystal powders, etc. The scenarios of the formation of splats (spread and solidified particles on the...

  • Materials processing by use of a Ti:Sapphire laser with automatically-adjustable pulse duration. Kamata, M.; Imahoko, T.; Ozono, K.; Obara, M. // Applied Physics A: Materials Science & Processing;2004, Vol. 79 Issue 7, p1679 

    We have developed an automatic pulsewidth-adjustable femtosecond Ti:Sapphire laser system that can generate an output of 50 fs-1 ps in duration, and sub-mJ/pulse at a repetition rate of 1 kpps. The automatic pulse compressor enables one to control the pulsewidth in the range of 50 fs-1 ps by use...

  • Design and Implementation of an Inclusive Ubiquitous Access. Nungu, Amos; Olsson, Robert; Pehrson, Bj√∂rn // Wireless Personal Communications;Nov2012, Vol. 67 Issue 1, p79 

    The development towards ubiquitous network access requires innovative solutions to get remote areas included, especially rural areas of developing regions. The challenges include robustness of network components, poor or non-existent power supply and sustainable business models. We argue that...

  • Tailored ablation processing of advanced biomedical hydroxyapatite by femtosecond laser pulses. Ozono, K.; Obara, M. // Applied Physics A: Materials Science & Processing;2003, Vol. 77 Issue 2, p303 

    The micromachining of hydroxyapatite (HAp) is highly important for orthopedics and dentistry, since human bone and teeth consist mainly of HAp. We demonstrate ultra-short Ti:sapphire laser ablation of HAp, using pulse-widths of 50 fs, 500 fs, and 2 ps at a wavelength of 820 nm and at 1 kpps. The...

  • 5 kW transversely excited atmospheric CO2 laser driven by a solid state exciter employing insulated gate bipolar transistors. Hatanaka, Hidekazu; Midorikawa, Katsumi; Obara, Minoru; Tashiro, Hideo // Review of Scientific Instruments;Nov93, Vol. 64 Issue 11, p3061 

    An average laser output power as high as 5 kW has been produced from a transversely excited atmospheric CO[sub 2] laser pumped with a new solid state exciter. The exciter providing a 100 J transfer energy consisted of a high voltage pulse generator and a two stage magnetic pulse compressor. A...

  • Stochastic Computer Simulation of Cermet Coatings Formation. Solonenko, Oleg P.; Jordan, Vladimir I.; Blednov, Vitaly A. // Advances in Materials Science & Engineering;9/7/2015, Vol. 2015, p1 

    An approach to the modeling of the process of the formation of thermal coatings lamellar structure, including plasma coatings, at the spraying of cermet powders is proposed. The approach based on the theoretical fundamentals developed which could be used for rapid and sufficiently accurate...

  • N2 Gas Plasma Inactivates Influenza Virus by Inducing Changes in Viral Surface Morphology, Protein, and Genomic RNA. Akikazu Sakudo; Naohiro Shimizu; Yuichiro Imanishi; Kazuyoshi Ikuta // BioMed Research International;2013, Vol. 2013, p1 

    We have recently treated with N2 gas plasma and achieved inactivation of bacteria. However, the effect of N2 gas plasma on viruses remains unclear. With the aim of developing this technique, we analyzed the virucidal effect of N2 gas plasma on influenza virus and its influence on the viral...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics