Compact, Integrated Lasers Suited for Bioinstrumentation

August 2012
Laboratory Equipment;Aug2012, Vol. 49 Issue 4, p26
Product Review
The article offers brief information on the Excelsior One ultraviolet, visible and near-infrared continuous-wave lasers from Newport Corp.'s Spectra-Physics.


Related Articles

  • Extended Kalman Doppler tracking and model determination for multi-sensor short-range radar. Mittermaier, Thomas J.; Siart, Uwe; Eibert, Thomas F.; Bonerz, Stefan // Advances in Radio Science;2016, Vol. 14, p39 

    A tracking solution for collision avoidance in industrial machine tools based on short-range millimeter-wave radar Doppler observations is presented. At the core of the tracking algorithm there is an Extended Kalman Filter (EKF) that provides dynamic estimation and localization in realtime. The...

  • EXFO Launches an Integrated Tunable Laser Assembly - The laser source for next-gen transmission systems that use complex modulation formats.  // Fiber Optics & Communications;Aug2013, Vol. 36 Issue 8, p11 

    The article discusses the release of the FLS-2800 Benchtop ITLA Tunable Laser Source which is considered as a continuous wave laser unit with slim linewidth and high-resolution tenability from EXFO Inc.

  • First-Hand Impressions of Lidar in Action.  // ECN: Electronic Component News;Jun2019, Vol. 63 Issue 5, p7 

    The article reports that Blackmore Sensors and Analytics Inc. has developed lidar with coherent detection technology relies on continuous wave (CW) light sources, which transmit constant power to the scene and offers views of Blackmore Co-Founder Jim Curry on the developed technology.

  • Switch to 3-D improves business and design.  // Design News;2/2/98, Vol. 54 Issue 3, p35 

    Reports that the SolidWorks mechanical-design software is being employed at the New Corporation of Irvine, California to improve its business and engineering process. Details on the software; Comments from Michael Francisco, product designer on company's Component Development Team; Reference to...

  • Investigation of the Response Mechanism of a Hg0.46Cd0.54Te Photovoltaic (PV) Detector Irradiated by Continuous Wave Sub-bandgap Photons. T. JIANG; X. ZHENG; X-A. CHENG; H-M. JING; Q-S. LU // Lasers in Engineering (Old City Publishing);2013, Vol. 25 Issue 3/4, p233 

    We have observed open-circle voltage, Voc, signals in a photovoltaic (PV) Hg0.46Cd0.54Te detector irradiated by the beam of a continuous wave (CW) CO2 laser operating at 10.6 µm and around 50 W/cm². The photon energy (approximately 0.12 eV) is far less than the band gap (approximately 0.91...

  • Characterization of laser annealed InP with ellipsometry and Hall effect measurement. Fremunt, R.; Hirayama, Y.; Arai, F.; Sugano, T. // Applied Physics Letters;1984, Vol. 44 Issue 5, p530 

    Indium phosphide layers into which sulphur ions were implanted at room temperature in the dose range of 5×1013-1×1015 cm-2 were annealed with continuous wave (cw) Nd:yttrium aluminum garnet (YAG) laser beam in double scan with the power density from 1.8 to 5.4×104 W cm-2 at a dwell...

  • Widely Tunable 1.55-μm Detuned Dual-Mode Laser Diode for Compact Continuous-Wave THz Emitter. Namje Kim; Young Ahn Leem; Hyunsung Ko; Min Yong Jeon; Chul Wook Lee; Sang-Pil Han; Donghun Lee; Kyung Hyun Park // ETRI Journal;Oct2011, Vol. 33 Issue 5, p810 

    We report the use of a widely tunable detuned dual-mode laser diode (DML) as a compact and portable continuous-wave THz emitter. The wavelength difference between the two lasing modes of this DML can be tuned from 2.4 nm to 9.3 nm by using integrated microheaters. The power difference between...

  • Green laser diode emits at 536 nm. Hecht, Jeff // Laser Focus World;Aug2012, Vol. 48 Issue 8, p20 

    The article offers information on wavelength of diodes. It states that Indium gallium nitride laser diodes have reached a new frontier in performance. The continuous wave(CW) emission at green wavelengths shorter than the 532 nm output of frequency doubled Nd:YAG lasers. It mentions that this...

  • Analysis of melt-through process of 1.07 μm continuous wave high power laser irradiation on metal. Lee, Kyung-Cheol; Baek, Won-Kye; Kwon, Hyukjoon; Shin, Wan-Soon; Yoh, Jack // Journal of Mechanical Science & Technology;Jun2013, Vol. 27 Issue 6, p1745 

    Laser-metal interactions are influenced by various parameters, including laser wavelength and laser pulse duration. By proper adjustments of these parameters, one can create states that manifest different phenomena during laser ablation. In this work, we study laser melt-through of metal using 1...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics