Put It in Reverse

March 2013
National Driller;Mar2013, Vol. 34 Issue 3, p59
Trade Publication
The author discusses reverse air drilling as a method of mud drilling and also describes few advantages of using reverse air drilling in terms of drilling fluids, differential pressures and drilling holes.


Related Articles

  • A NEW METHOD of laser drilling. Kar, Aravinda; Latham, William P. // Industrial Laser Solutions;Dec2007, Vol. 22 Issue 12, p15 

    The article discusses the methods of laser drilling. These methods include percussion drilling, mechanical trepanning, and optical trepanning. The percussion drilling uses pulsed lasers with laser spot approximately equal to the diameter of the hole while the mechanical trepanning utilizes tiny...

  • Comparison of Some Rock Hardness Scales Applied in Drillability Studies. Hoseinie, S.; Ataei, M.; Mikaiel, R. // Arabian Journal for Science & Engineering (Springer Science & Bu;Jul2012, Vol. 37 Issue 5, p1451 

    In this paper, the influence of hardness of rock material on drilling rate has been studied. During the research, eight various rock types were subjected to drilling and hardness tests such as; Mohs hardness, Indentation Hardness Index (IHI) and L-type Schmidt hammer. Mean Mohs hardness of each...

  • Structure design of and experimental research on a two-stage laval foam breaker for foam fluid recycling. Wang Jin-song; Cao Pin-lu; Yin Kun // Journal of Environmental Biology;Jul2015, Vol. 36 Issue 4, p829 

    Environmental, economical and efficient antifoaming technology is the basis for achievement of foam drilling fluid recycling. The present study designed a novel two-stage laval mechanical foam breaker that primarily uses vacuum generated by Coanda effect and Laval principle to break foam....

  • Flow field analysis on the erosion prone parts of the drilling equipment. WANG Qinglei; DONG Liping // Applied Mechanics & Materials;2014, Issue 697, p350 

    The erosion and wear mechanism for drilling equipment is studied in this paper, which is for the problem of unstable performance of drilling system and short lifetime caused by the erosion of drilling equipment by drilling fluid. The flow field, surface pressure of the erosion prone parts and...

  • Improved Coefficient of Friction Using Different Types of Lubricants in Drilling Operation. Ismail, Abdul Razak; Rashid, Muhammad Syafiq Ab; Ismail, Nurul Jannah; Sulaiman, Wan Rosli Wan; Jaafar, Mohd Zaidi // Advanced Materials Research;2015, Vol. 1125, p210 

    The key performance of any drilling operation depends heavily on the choice of drilling fluid used as well as how good it can overcome the drill pipe friction. It is essential that the drilling fluid be able to reduce bit wear, torque and drag. Drilling with oil-based drilling fluid offer less...

  • Drilling and completion technique for high angle deviated wells in 3rd island of Jidong field. LIU Xiaolong; JIN Xiulan; ZHANG Jin; WANG Qingli; XUE Jianxing; LING Hongjun // Oil Drilling & Production Technology / Shiyou Zuancai Gongyi;2012, Vol. 34 Issue 4, p7 

    The 3rd artificial island in Jidong field is surrounded by sea, with the area of 200 acres. To accelerate Oilfield development and achieve the objective of operation with multi rigs simultaneously without affecting each other, multiwell cluster is taken as the well deployment ways. Through...

  • Underground Oil Storage Cavern Project. Sahay, Vinay // National Driller;Sep2010, Vol. 31 Issue 9, p20 

    The article offers information on the use of water-based down-the-hole (DTH) hammer drilling technology in the Vizag underground crude oil storage cavern project. It discusses the purpose of employing the technology in the project and highlights technical specifications required for the purpose....

  • Application of self-oscillating rotary percussion drilling tools in Shengli Oilfield. LIU Tianke // Oil Drilling & Production Technology / Shiyou Zuancai Gongyi;2012, Vol. 34 Issue 4, p54 

    The self-oscillating rotary percussion drilling tools are set above the bit. The drilling fluid flows through the self-oscillator with high speed and hydraulic pulse is formed and is imposed on the percussion transmission rod, following with the generation of low amplitude but high frequency...

  • Drilling technique of Well BY-1HF for shale reservoir. LIU Xia; CHENG Bo; CHEN Ping; LIU Kuiwei; WU Caili // Oil Drilling & Production Technology / Shiyou Zuancai Gongyi;2012, Vol. 34 Issue 4, p4 

    Well BY-1HF is the first exploration well drilled in shale formation in He'nan Oilfield. Based on the information of adjacent wells and technical difficulties, the wellbore structure, drilling fluid and cementing technique are designed. Firstly, the pilot hole is drilled, and then backfilled and...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics