Erratum: Effects of ion-implanted C on the microstructure and surface mechanical properties of Fe alloys implanted with Ti [Appl. Phys. Lett. 45, 529 (1984)]

Follstaedt, D. M.; Knapp, J. A.; Pope, L. E.; Yost, F. G.; Picraux, S. T.
January 1985
Applied Physics Letters;1/15/1985, Vol. 46 Issue 2, p207
Academic Journal
Correction Notice
Provides correction to the article titled 'Effects of ion-implanted C on the microstructure and surface mechanical patterns of Fe alloys implanted with Ti,' by D.M. Follstaedt, J.A. Knapp, L.E. Pope, F.G. Yost and S.T. Picraux which was published in 'Applied Physics Letters.'


Related Articles

  • Influence of Ti and C on the Solidification Microstructure of Fe-10Al-5Cr Alloys. Adams, K.; DuPont, J. // Metallurgical & Materials Transactions. Part A;Jan2010, Vol. 41 Issue 1, p194 

    The influence of Ti and C on the solidification microstructure of Fe-10Al-5Cr (all composition values in weight percent) alloys was examined with solidification modeling and a variety of experimental techniques. Several Fe-10Al-5Cr-Ti-C alloys were fabricated using the arc button melting process...

  • Impurity (Fe, Cl, and P)-Induced Grain Boundary and Secondary Phases in Commercially Pure Titanium (CP-Ti). Yan, M.; Luo, S.; Schaffer, G.; Qian, M. // Metallurgical & Materials Transactions. Part A;Aug2013, Vol. 44 Issue 8, p3961 

    A detailed transmission electron microscopy (TEM) study has been made of the microstructures of two as-sintered CP-Ti materials. We show that iron content at the impurity level of 1280 ppm, less than the limit (2000 ppm) for CP-Ti ASTM Grade 1, is sufficient to lead to the formation of a grain...

  • Influence of Modifiers on the Structure and Properties of Composite Coatings system Ti-B-Fe. Galchenko, N. K.; Kolesnikova, K. A.; Belyuk, S. I.; Dampilon, B. V. // Advanced Materials Research;2014, Issue 880, p80 

    The paper studies how microalloying with amorphous boron (Bam) and zirconia (ZrO2) influences the structure and properties of boride coatings. Two factors are found to strongly affect the structure and phase formation in composite coatings produced by electron beam surfacing, especially when...

  • Microstructural Evolution in Novel Suction Cast Multicomponent Ti-Fe-Co Alloys. Samal, Sumanta; Agarwal, Swapnil; Gautam, Priya; Biswas, Krishanu // Metallurgical & Materials Transactions. Part A;Feb2015, Vol. 46 Issue 2, p851 

    The present work is aimed at understanding the solidification pathways of the Ti-rich Ti-Fe-Co in situ composites consisting of ultrafine eutectic with micron-scale dendrites. The effect of addition of Co in the Ti-rich binary Ti-Fe alloys has been systematically investigated. The series of...

  • Microstructure and Hydrogen Storage Properties of Ti-V-Fe Alloys. Gang Fu; Feng Wang; Jiang Wang; Maohua Rong; Zhongmin Wang; Guanghui Rao; Huaiying; Zhou // Materials Science Forum;2016, Vol. 847, p3 

    Microstructure, hydrogen storage properties and thermal stabilities of V-Ti-Fe alloys prepared by arc-melting were studied in this work. It was confirmed that V60Ti30Fe10, V70Ti20Fe10 and V80Ti10Fe10 alloys are a body-centered cubic (bcc) single phase, while V75Ti10Fe15 alloy consists of the bcc...

  • Influence of Ti on the Microstructure and Performance of Fe-Cr Alloy Cladding Layer. Jianyang Liu; Qing Tao; Wei Lai; Weiwei Tang; Jian Wang; Wei Liu // Materials Science Forum;2016, Vol. 849, p709 

    Considering the multi-porous and rimous Fe-Cr series alloy coatings deposited on Q235 steel by plasma arc welding, the mass fraction of 0%, 2%, 4%, 6%, 8% Ti is mixed into Fe-Cr alloy powder. The microstructure and characteristics of the Fe-Cr series alloys with a range content of Ti were...

  • Magnetic properties and giant magnetoimpedance of nanocrystalline Fe...-...Zr...B...Cu...ribbons. He, J.; Guo, H.Q. // Journal of Applied Physics;10/1/1999, Vol. 86 Issue 7, p3873 

    Presents information on a study which examined the influence of substitution of boron for iron on the microstructure, magnetic properties and giant magnetoimpedance effect of nanocrystalline iron-zirconium-boron-copper ribbons. Experimental procedures; Magnetoimpedance characteristics; Conclusions.

  • Effect of silicon content on the microstructure and properties of Fe–Cr–C hardfacing alloys. Azimi, G.; Shamanian, M. // Journal of Materials Science;Feb2010, Vol. 45 Issue 3, p842 

    In this study, the surface of St52 steel was alloyed with preplaced powders 55Fe39Cr6C, 49Fe39Cr6C6Si, and 45Fe39Cr6C10Si using a tungsten-inert gas as the heat source. Following surface alloying, conventional characterization techniques, such as optical microscopy, scanning electron microscopy,...

  • Microstructure and wear properties of Fe–TiC surface composite coating by laser cladding. Shiyao Qu; Xinhong Wang; Min Zhang; Zengda Zou // Journal of Materials Science;Mar2008, Vol. 43 Issue 5, p1546 

    AISI 1045 steel surface was alloyed with pre-placed ferrotitanium and graphite powders by using a 5-kW CO2 laser. In situ TiC particles reinforced Fe-based surface composite coating was fabricated. The microstructure and wear properties were investigated by means of scanning electron microscopy,...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics