TITLE

Publisher's Note: “Ion-beam driven dust ion-acoustic solitary waves in dusty plasmas” [Phys. Plasmas 17, 044502 (2010)]

AUTHOR(S)
Adhikary, N. C.; Misra, A. P.; Bailung, H.; Chutia, J.
PUB. DATE
May 2010
SOURCE
Physics of Plasmas;May2010, Vol. 17 Issue 5, p059902
SOURCE TYPE
Academic Journal
DOC. TYPE
Correction notice
ABSTRACT
A correction to the article "Ion-beam driven dust ion-acoustic solitary waves in dusty plasmas," that was published previously, is presented.
ACCESSION #
51059807

 

Related Articles

  • Studies on surface damage induced by ion bombardment. Wang, Yugang; Kang, Yixiu; Zhao, Weijang; Yan, Sha; Zhai, Pengji; Tang, Xiaowei // Journal of Applied Physics;2/1/1998, Vol. 83 Issue 3, p1341 

    Examines surface damage induced by ion bombardment in highly oriented pyrolitic graphite (HOPG) samples. Types of ions used in the bombardment; What was derived from observation of the samples surface after bombardment; Detailed information on the experiments conducted; Results of the study.

  • Ion-induced room temperature synthesis of low resistive nickel germanide phase. Dhar, Sankar; Som, Tapobrata; Kulkarni, V.N. // Journal of Applied Physics;2/15/1998, Vol. 83 Issue 4, p2363 

    Provides information on an experiment synthesizing low resistivity Ni2Ge phase by MeV ion beam mixing using Kr and Ar ions at and above room temperatures. Methodology used to conduct this experiment; Results of the experiment.

  • Study on the effect of ion beam bombardment during deposition on preferred orientation in rutile-... Zhang, Feng; Zheng, Zhihong; Yu Chen; Duo Liu; Xianghuai Liu // Journal of Applied Physics;4/15/1998, Vol. 83 Issue 8, p4101 

    Provides information on an experimental study on the effect of ion beam bombardment during deposition on preferred orientation in rutile-type titanium dioxide films. Methodology used to conduct the experiment; Results of the experiment.

  • Ion assisted growth and characterization of polycrystalline silicon and silicon-germanium films. Saha, Chumki; Das, S.; Ray, S.K.; Lahiri, S.K. // Journal of Applied Physics;4/15/1998, Vol. 83 Issue 8, p4472 

    Provides information on an experimental study depositing polysilicon films at a low temperature by single and dual ion beam sputtering. Methodology used to conduct the experiment; Information on surface topography and deposited films; Results of the study; Discussion on the results.

  • Etch rate modeling for ion-irradiated nitrocellulose. Merhari, L.; Belorgeot, C.; Moliton, J. P. // Applied Physics Letters;12/24/1990, Vol. 57 Issue 26, p2785 

    The self-developing mechanism of nitrocellulose when used as an ion beam resist is described by a model predicting the evolution of the etch rate versus irradiation time. Fundamentals of the model based on ion energy deposition dependent ablative development along with related mathematical...

  • Improved tribological properties of sputtered MoSx films by ion beam mixing. Kobs, K.; Dimigen, H.; Hübsch, H.; Tolle, H. J.; Leutenecker, R.; Ryssel, H. // Applied Physics Letters;9/1/1986, Vol. 49 Issue 9, p496 

    Ion beam mixing yielded a distinct enhancement in the sliding life of sputtered MoSx films without any deterioration of the excellent lubrication properties. This effect occurs only at higher ion energies indicating an improved film-substrate adherence caused by a mixing of the interface, which...

  • Dot lithography for zero-dimensional quantum wells using focused ion beams. Kubena, R. L.; Joyce, R. J.; Ward, J. W.; Garvin, H. L.; Stratton, F. P.; Brault, R. G. // Applied Physics Letters;6/1/1987, Vol. 50 Issue 22, p1589 

    A 50-keV focused Ga+ beam formed in a two-lens microprobe column with prefinal lens deflection was used to expose dot arrays in a negative acting bilevel resist. Dot arrays 600 μm×600 μm with 600-Å-diam resist posts on 0.6 μm centers (incorporating 1024×1024 dots) were...

  • Unlubricated friction and wear of an ion beam mixed, nitrogen-implanted Fe50Ti50 surface alloy on AISI 304 stainless steel. Hirvonen, J-P.; Nastasi, M.; Mayer, J. W. // Applied Physics Letters;7/27/1987, Vol. 51 Issue 4, p232 

    Nitrogen implantation was observed to significantly improve the dry sliding properties of an ion beam mixed Fe50Ti50 surface alloy on AISI 304 stainless steel. Implantation to the fluence of 1.7×1017 N/cm2 at 50 keV increased the wear resistance but a decreased friction coefficient was...

  • One-dimensional GaAs wires fabricated by focused ion beam implantation. Hiramoto, Toshiro; Hirakawa, Kazuhiko; Iye, Yasuhiro; Ikoma, Toshiaki // Applied Physics Letters;11/16/1987, Vol. 51 Issue 20, p1620 

    We have developed a novel, simple technique for fabrication of one-dimensional GaAs wires by utilizing only a focused ion beam (FIB) technology. The FIB implantation forms high-resistive regions which confine an n+ channel into a very narrow conductive wire. The minimum width of the GaAs wire...

  • Significantly extended analytical potential of Rutherford backscattering spectrometry by in situ combination with low-energy sputtering. Wittmaack, K.; Menzel, N. // Applied Physics Letters;10/31/1988, Vol. 53 Issue 18, p1708 

    We have assembled a dual-beam system which allows solid samples to be analyzed by Rutherford backscattering spectrometry (RBS) at deliberately chosen stages of in situ sputter etching by low-energy ion bombardment. Using the novel setup we demonstrate that, for a large variety of samples, the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics