TITLE

Effect of Operating Parameters on Ethanol-Water Vacuum Separation in an Ethanol Dehydration Apparatus and Process Modeling with ANN

AUTHOR(S)
Karimi, S.; Ghobadian, B.; Najafi, G.; Nikian, A.; Mamat, R.
PUB. DATE
December 2014
SOURCE
Chemical Product & Process Modeling;Dec2014, Vol. 9 Issue 2, p179
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
99707555

 

Related Articles

  • Measuring and Modeling Liquid--Liquid Equilibria for a Soybean Oil, Oleic Acid, Ethanol, and Water System. Mohsen-Nia, Mohsen; Modarress, Hamid; Nabavi, Hamid Reza // Journal of the American Oil Chemists' Society (JAOCS);Oct2008, Vol. 85 Issue 10, p973 

    Vegetable oils can be deacidified by liquid--liquid extraction based on differences in polarity between triglycerides and fatty acids and differences in solubility. Information on the equilibrium between the phases of such systems is important for designing separation processes. The present...

  • Bioethanol Dehydration through Polyvinyl alcohol (PVA) and 3A Zeolite Mixed Matrix Composite Pervaporation Membrane. SARKAR, BAISALI; SUNITHA, KAMMARA; SRIDHAR, SUNDERGOPAL; KALE, VIJAY // Journal of Polymer Materials;Apr-Jun2013, Vol. 30 Issue 2, p131 

    In this study, attempts have been made to enhance the hydrophilicity of polyvinylalcohol (PVA) pervaporation (PV) membrane by incorporating 3A zeolite for the separation of ethanol-water azeotrope at varying temperature and permeate pressure. Crosslinking was carried out with 4% glutaraldehyde...

  • Adsorption of alcohol from water by poly(ionic liquid)s. Bi, Wentao; Tang, Baokun; Row, Kyung // Bioprocess & Biosystems Engineering;Jun2013, Vol. 36 Issue 6, p651 

    Bioethanol is used widely as a solvent and is considered a potential liquid fuel. Ethanol can be produced from biomass by fermentation, which results in low concentrations of alcohol in water. Conventional distillation is normally used to separate ethanol from water, but it required high energy...

  • Modelling of pervaporation: Parameter estimation and model development. Valentínyi, Nóra; Cséfalvay, Edit; Mizsey, Peter // Chemical Engineering Research & Design: Transactions of the Inst;Jan2013, Vol. 91 Issue 1, p174 

    Pervaporation is proved to be a commercially viable membrane separation process by this time. However, to become a widely applied process in the industry it is of crucial importance to develop membrane properties, process and module design as well as proper modelling in professional software...

  • EVALUACIÓN DE LA DESHIDRATACIÓN DE ALCOHOL CARBURANTE MEDIANTE SIMULACIÓN DE PROCESOS. Quintero, Julián Andrés; Montoya, María Isabel; Sánchez, Óscar Julián; Cardona, Carlos Ariel // Biotecnología en el Sector Agropecuario y Agroindustrial;ago2007, Vol. 5 Issue 2, p72 

    Ethanol dehydration plays a crucial role during fuel ethanol production process, especially when costs of the overall process are considered. For product recovery step from fermentation broth, several technologies have been proposed. These technologies include conventional distillation followed...

  • Plasma-treated polyethersulfone coated with crosslinked poly(vinyl alcohol): composite membranes for pervaporation dehydration of ethanol. Villagra Di Carlo, Betina; Habert, Alberto // Journal of Materials Science;Feb2013, Vol. 48 Issue 4, p1457 

    Composite membranes with crosslinked poly(vinyl alcohol) matrix as selective layer coated on a polyethersulfone supporting porous layer were prepared aiming at separating ethanol/water mixtures by pervaporation. A polyethersulfone asymmetric microporous membrane was synthesized by the wet phase...

  • Experimental study and cost evaluation for ethanol separation from fermentation broth using pervaporation. Pakawadee Kaewkannetra; Nirachorn Chutinate; Samart Moonamart; Tinnakorn Kamsan; Tze Yen Chiu // Desalination & Water Treatment;Mar2012, Vol. 41 Issue 1-3, p88 

    In this work, the separation of two types of mixtures, ethanol--water mixture and fermented sweet sorghum, was investigated using cellulose acetate supported polyvinyl alcohol composite membranes. The pervaporation (PV) performances of the two mixtures under different operating parameters...

  • Fabrication and Characterization of Pulp/Chitosan Composite Membranes Crosslinked with 3-Methylglutaric Anhydride for Pervaporation of Ethanol/Water Mixture. Truong Thi Cam Trang; Nguyen Thi Nhung; Kobayashi, Takaomi // Engineering;Feb2011, Vol. 3 Issue 2, p110 

    Chitosan/Cellulose (CTS/CL) composite membranes were prepared by cross-linking reaction with 3-methylglutaric anhydride (3MGA). The cross-linked membranes with CTS/CL were obtained at different CTS contents in variations from 50 to 100 wt%, and these membranes were applied in the dehydration of...

  • DEHYDRATION OF ETHANOL USED AS A FUEL ADDITIVE. Kupiec, Krzysztof; Kubala, Agnieszka // Environment Protection Engineering;2006, Vol. 32 Issue 1, p151 

    The ecological aspects of utilizing ethanol as fuel additive are discussed. The pressure swing adsorption process used for ethanol dehydration is described. Principles of the modelling of ethanol dehydration by the pressure swing adsorption are presented.

  • Performance analysis and improvement measurement for electro-desalting of crude oil with high-salt and high-water content. Gao Hongli; Zeng Maohui // Chemical Engineering of Oil & Gas / Shi You Yu Tian Ran Qi Hua G;2013, Vol. 42 Issue 1, p18 

    The performance analysis of electro-desalting of several types of crude oil with high-salt and high-water content in atmospheric-vacuum distillation unit in Sinopec Maoming Company were conducted. The effects of critical factors on desalting, such as properties of crude oil, water injection,...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics