Some Recent Developments in Coupling of Finite Element and Boundary Element Methods - Part II: Dynamic Procedures for Determining the Relaxation Parameters for the Mixed Dirichlet-Neumann Domain Decomposition FEM-BEM Coupling Method

Elleithy, Wael; Lau Teck Leong
July 2014
Applied Mechanics & Materials;2014, Issue 580-583, p2943
Academic Journal
Part I of this paper presents an overview of the conventional and a class of domain decomposition finite element-boundary element coupling methods. In this part, a review of the mixed Dirichlet-Neumann domain decomposition coupling method, procedures for dynamic calculation of relaxation parameters for the mixed Dirichlet-Neumann FEM-BEM coupling method and an example application are presented.


Related Articles

  • Some Recent Developments in Coupling of Finite Element and Boundary Element Methods - Part I: An Overview. Elleithy, Wael; Lau Teck Leong // Applied Mechanics & Materials;2014, Issue 580-583, p2936 

    Conventional and a class of domain decomposition finite element-boundary element coupling (FEM-BEM) methods are reviewed. This is Part I of two papers. In Part II, a review of the mixed Dirichlet-Neumann domain decomposition FEM-BEM coupling method is presented and optimal dynamic values of the...

  • Study on downburst wind field characteristics under mountainous terrain. Haitao Shi; Yuanze Wu; Sun Yi; Baifeng Ji // Applied Mechanics & Materials;2014, Issue 580-583, p2954 

    Downburst is a strong downdraft thunderstorm in the ground formed after the violent impact and spread along the ground very sudden and destructive winds near the ground short. From an engineering point of view for the structure of wind-resistant design, researching downburst wind field...

  • State Space Solution of Response for Piles Subjected to Lateral Loads. Fuliang Mei; Guiling Li // Applied Mechanics & Materials;2014, Issue 580-583, p2948 

    A state space method has been put forward for finding the deformations and internal forces of piles subjected to lateral loads. First of all, a pile was divided into a number of pile segments, on which the foundation reaction coefficients were viewed as a constant based on the three parameter...

  • Study on Downburst Wind Load under Characteristic Topography. Yuanze Wu; Yi Sun; Haitao Shi; Baifeng Ji // Applied Mechanics & Materials;2014, Issue 580-583, p2958 

    Gemorphological type is the important factor influencing the downburst wind profile. In this thesis, firstly we determine four categories of landform types under the criteria of roughness. The CFD pre-processing software GAMBIT was used to build considering the landscape type's downburst CFD...

  • Merging of the indirect discrete boundary elements to the finite element analysis and its application to two dimensional elastostatics problems. Boutchicha, D.; Rahmani, O.; Abdelkader, M.; Sahli, A.; Belarbi, A. // International Journal of Applied Engineering Research;2007, Vol. 2 Issue 3, p441 

    This work presents an implementation of a combined boundary element finite element analysis. An indirect discrete boundary element method, where the fundamental solutions are employed as the expansion functions and their singularities are located outside the domain of the problem is used for the...

  • A Minimal Model to Explore the Influence of Distant Modes on Mode-Coupling Instabilities. Kruse, Sebastian; Hoffmann, Norbert // AIP Conference Proceedings;9/30/2010, Vol. 1281 Issue 1, p1411 

    The phenomenon of mode-coupling instability is one of the most frequently explored mechanisms to explain self-excited oscillation in sliding systems with friction. A mode coupling instability is usually due to the coupling of two modes. However, further modes can have an important influence on...

  • BEM and FEM analysis of Signorini contact problems with friction. Renaud, C.; Feng, Z.-Q. // Computational Mechanics;Jul2003, Vol. 31 Issue 5, p390 

    In this paper, we present a comparative study of the boundary element method (BEM) and the finite element method (FEM) for analysis of Signorini contact problems in elastostatics with Coulomb's friction law. Particularities of each method and comparison with the penalty method are discussed....

  • The growth of vapour bubbles in superheated water between two finite boundaries. Mohammadein, S.A; Gad El-Rab, R.A // Canadian Journal of Physics;Jul2001, Vol. 79 Issue 7, p1021 

    The paper analyses the behaviour of vapour-bubble growth between finite boundaries. The Plesset and Zwick theory is modified by assumptions that are different than those studied before. The growth problem is solved analytically in terms of initial bubble velocity and initial void fraction. The...

  • On coupling of reproducing kernel particle method and boundary element method. Lee, C. K.; Lie, S. T.; Shuai, Y. Y. // Computational Mechanics;Sep2004, Vol. 34 Issue 4, p282 

    In this paper a new coupling method to merge the reproducing kernel particle method (RKPM) and the boundary element method (BEM) is proposed. In this formulation, the whole problem domain will first be divided into two subdomains in which the RKPM and the BEM are applied respectively. A simple...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics