TITLE

Research the Utilization Rate of Aluminum Alloy Material

AUTHOR(S)
Deying Sun
PUB. DATE
August 2014
SOURCE
Applied Mechanics & Materials;2014, Issue 595, p79
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
There are many parts in aerospace fixing device, the 7075 - t35 1 brand aluminum alloy is a commonly used material of these parts[2].The material has high strength, good toughness, wear resistance and resistance to spalling corrosion resistance and other characteristics; After the machining deformation, comprehensive mechanical processing performance is good[ 1]. As a result, the materials are widely used in aerospace equipment. Smaller wall thickness, complex structure, multiple azimuth need processing, is the characteristics of these parts, make the individual parts machining material consumption is larger, increase the cost of the material consumption. In this paper, through the analysis of part structure and machining process, adopt to layout method, in order to improve the utilization rate of aluminum alloy sheet metal, reduce the unit cost.
ACCESSION #
99672992

 

Related Articles

  • Corrosion and tribological properties of a composite based on aluminum with graphite particles. Shcherets’kyi, O.; Lakhnenko, V.; Shcherets’kyi, V. // Materials Science;Nov2007, Vol. 43 Issue 6, p886 

    We study the corrosion resistance and tribological characteristics of composite materials based on an aluminum-silicon alloy with dispersed metallized graphite particles. Graphite decreases the friction coefficient and makes the wear resistance of materials 3–5 times higher as compared...

  • Corrosion resistances of stressed building structures made of aluminum alloys. Sinyavskii, V. S.; Kalinin, V. D. // Protection of Metals;Nov2007, Vol. 43 Issue 6, p572 

    Propagation of various types of localized corrosion on real stressed building structures was examined. The naturally aged 1915T alloy used in such structures was found to be highly resistant under various atmospheric conditions. It was insensitive to corrosion cracking and exfoliation corrosion,...

  • Natural Honey as Corrosion Resistant for Aluminium Alloy. Rosliza, R.; Senin, H. B.; Muzathik, A. M.; Wan Nik, W. B. // AIP Conference Proceedings;7/7/2009, Vol. 1150 Issue 1, p270 

    The corrosion behaviour of AA6061 aluminium alloy in tropical seawater was investigated using weight loss measurement and electrochemical polarization technique. The electrochemical measurements showed that the presence of natural honey as corrosion resistant significantly decrease the corrosion...

  • Electrochemical Behaviour of Al, Al–In and Al–Ga–In Alloys in Chloride Solutions Containing Zinc Ions. El Abedin, S. Zein; Endres, F. // Journal of Applied Electrochemistry;Oct2004, Vol. 34 Issue 10, p1071 

    electrochemical behaviour of Al, Al-In and Al-Ga-In alloys in 0.6 M NaCl solutions with and without Zn2+ was investigated. The study was performed by means of open circuit potential, potentiodynamic polarization, potentiostatic current-time and electrochemical impedance spectroscopy measurements...

  • Assessment of Electrochemical and Mechanical Behavior of Hot-Extruded Powders and As-Cast Samples of Al-Ni Alloys. Osório, Wislei R.; Freitas, Emmanuelle S.; Spinelli, José E.; Canté, Manuel V.; Afonso, Conrado R. M.; Garcia, Amauri // International Journal of Electrochemical Science;Oct2012, Vol. 7 Issue 10, p9946 

    The cellular or dendritic morphologies of the Al-rich matrix as well as the morphology, size, and distribution of the intermetallic particles can affect not only the electrochemical corrosion resistance but also the mechanical strength of Al-Ni alloys. The aim of this work is to analyze the...

  • Effect of commercial mouthwashes on the corrosion resistance of Ti-10Mo experimental alloy. Maria Alves Rezende; Ana Alves; Eduardo Codaro; Conceição Dutra // Journal of Materials Science: Materials in Medicine;Jan2007, Vol. 18 Issue 1, p149 

    Abstract??The purpose of this work was to evaluate the effect of three commercial mouthwashes on the corrosion resistance of Ti-10Mo experimental alloy. Experiments were made at 37.0 ? 0.5?C in a conventional three-compartment double wall glass cell containing commercial mouthwashes. Three...

  • Composite Coatings Based on Aluminum Nitride and an Organic Binder. Beketov, D. A.; Beketov, A. R.; Khoroshavin, L. B. // Refractories & Industrial Ceramics;Jan/Feb2003, Vol. 44 Issue 1, p65 

    Results for a special mixture, composed of AlN and a thermoreactive binder (a liquid phenol-formaldehyde resin) and tested for thermal destruction are presented. The inert AlN increases corrosion stability of the mixture and imparts the needed physicochemical properties to the material.

  • Anti corrosive treatment.  // RoSPA Occupational Safety & Health Journal;Aug2004, Vol. 34 Issue 8, p47 

    Features the Apticote anti-corrosive surface treatment introduced by Poeton Industries in Great Britain in 2004. Components; Advantages.

  • Too little cover.  // Concrete Construction;Jul2004, Vol. 49 Issue 7, p76 

    Shares insights on a problem regarding concrete protection for reinforcement. Basis of determining the minimum concrete cover requirements; Requirement for the length of the aggregates; Recommendation for a migrating corrosion inhibitor treatment to avoid corrosion of the rebar.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics