TITLE

Electrochemical and Corrosion Behavior of Nanocrystalline TiNi-Based Alloys and Composite

AUTHOR(S)
BALCERZAK, M.; JURCZYK, M.
PUB. DATE
October 2014
SOURCE
Acta Physica Polonica, A.;2014, Vol. 126 Issue 4, p888
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this work TiNi-based nanocrystalline alloys and composite were produced by mechanical alloying process with subsequent annealing at 750°C for 0.5 h. Mechanical alloying was performed in a SPEX 8000 Mixer Mill. TiNi alloy was chemically modified by Ag elemental powder. Silver content equaled 5 wt%. X-ray diffraction analyses revealed formation of TiNi main phase after annealing. Additionally, two minor phases Ti2Ni and TiNi3 were detected for unmodified alloy. Crystallites of obtained powders were nanosized. Corrosion and electrochemical measurements were performed in 6 M KOH solution. All synthesized materials were used as negative electrode for Ni-MHx batteries. Ag addition positively affects on stability of discharge capacity of TiNi alloy during of charge/discharge tests.
ACCESSION #
99622113

 

Related Articles

  • Improved Performance of VO x-Coated Li-Rich NMC Electrodes. Laszczynski, Nina; von Zamory, Jan; Kalhoff, Julian; Loeffler, Nicholas; Chakravadhanula, Venkata Sai Kiran; Passerini, Stefano // ChemElectroChem;Nov2015, Vol. 2 Issue 11, p1768 

    A VO x coating of Li1.2Mn0.56Ni0.16Co0.08O2, made through a low-temperature annealing process (350 °C), results in the formation of a protecting layer, which enables electrodes to be prepared with an aqueous binder, offering a significantly improved electrochemical performance. The comparison...

  • Determination of lisinopril using β-cyclodextrin/graphene oxide-SOH modified glassy carbon electrode. Hasanzadeh, Mohammad; Pournaghi-Azar, Mohammad; Shadjou, Nasrin; Jouyban, Abolghasem // Journal of Applied Electrochemistry;Jul2014, Vol. 44 Issue 7, p821 

    An electrochemical method has been successfully demonstrated for sensitive determination of lisinopril with β-cyclodextrin-graphene oxide-SOH composite modified glassy carbon electrode (β-CD/GO-SOH/GCE). Cyclic voltammetry, differential pulse voltammetry, and chronocoulometry were used to...

  • Electrochemical Impedance Spectroscopic Study of the Electronic and Ionic Transport Properties of NiF2/C Composites. Yue-Li Shi; Ming-Fang Shen; Shou-Dong Xu; Xiang-Yun Qiu; Li Jiang; Ying-Huai Qiang; Quan-Chao Zhuang; Shi-Gang Sun // International Journal of Electrochemical Science;Aug2011, Vol. 6, p3399 

    NiF2/C composites were prepared through high energy mechanical milling, and the cyclic performance was characterized by discharge-charge measurements. Electrochemical impedance spectra (EIS) for NiF2/C electrode were obtained at different potentials during initial discharge-charge cycle. The...

  • A FACILE ONE-STEP HYDROTHERMAL METHOD TO PRODUCE GRAPHENE OXIDE/-NANOTUBES COMPOSITES AND ITS ELECTROCHEMICAL PROPERTIES. FU, WEN; CHEN, CHUNNIAN // NANO;Aug2012, Vol. 7 Issue 4, p-1 

    The composites of graphene oxide/-nanotubes (GO/-NTs) have been fabricated through a facile one-step hydrothermal method. -NTs crystallines were homogeneously distributed on GO, which have been confirmed by transmission electron microscopy analysis (TEM). The structure, composition and...

  • Preparation of nano-carbon black polypropylene disc working electrode and its electrochemical behaviour. Li, Zaiyuan; Wang, Yunkai // Materials Research Innovations;May2015 Supplement s5, Vol. 19, pS5-202 

    In this paper, nano-carbon black and polypropylene were used as raw materials to prepare Φ18 mm disc working electrode by the process of hot extrusion mixing-hot embossing-electrode preparing. Saturated calomel electrode was used as a reference electrode and graphite plate as the auxiliary...

  • Electro-chemical monitoring of static recrystallization. Filus, F.; Schindler, I.; Fiala, J.; Lasek, S.; Kubina, T.; Niewielski, G.; Kuc, D.; Hadasik, E. // Archives of Civil & Mechanical Engineering (Oficyna Wydawnicza P;2011, Vol. 11 Issue 2, p277 

    The electro-chemical potentio-kinetic method has proved to be a sensitive technique for monitoring of static recrystallization in austenitic steel AISI 304 after its cold forming and annealing. Results obtained in this manner are in very good conformity with the results of metallographic and...

  • Nanostructured electrode materials for Ni-MHx batteries prepared by mechanical alloying. Jurczyk, M. // Journal of Materials Science;Aug2004, Vol. 39 Issue 16/17, p5271 

    Nanocrystalline TiFe- and Mg2Ni-type alloys were prepared by mechanical alloying followed by annealing. The structure and electrochemical properties of these materials were studied. The properties of hydrogen host materials can be modified substantially by alloying to obtain the desired storage...

  • Electrochemical performance of patterned LiFePO4 nano-electrode with a pristine amorphous layer. Mao Wang; Wei Zhang; Yihang Liu; Yong Yang; Chunsheng Wang; Yuan Wang // Applied Physics Letters;4/28/2014, Vol. 104 Issue 17, p1 

    A patterned LiFePO4 nanorod with a pristine amorphous LiFePO4 surface layer was fabricated by controlling the temperature gradient from the interior to the exterior layer in high-temperature annealing process through designing hierarchical multilayer electrode structure. The three dimensional...

  • Influence of the austenitic rolling temperature on the microstructure of a TRIP steel before intercritical annealing. Santos, C.; Vieira, A.; Paula, A.; Viana, C. // Journal of Materials Science;Jun2009, Vol. 44 Issue 12, p3057 

    In the present work, the influence of different thermomechanical treatments in the final microstructure of a multiphase-steel (0.2%C–1.5%Mn–1.5%Si) through of morphological characterization of the transformation products was studied. The goal of this work was to investigate the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics