TITLE

Mechanical Alloying of Ti-20Ta-20Nb-(10/20)Mg Alloys

AUTHOR(S)
ADAMEK, G.
PUB. DATE
October 2014
SOURCE
Acta Physica Polonica, A.;2014, Vol. 126 Issue 4, p871
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper preparation of new β-Ti alloys using mechanical alloying process has been shown. β-Ti alloys are the best metallic biomaterials because of their excellent properties: biocompatibility, low Young moduli and corrosion resistance. Ti-20Ta-20Nb biocompatible alloy was investigated. Mg was used as alloying element, as well (10, 15 and 20 wt%). Pure Ti, Nb, Ta and Mg powders were alloyed under argon atmosphere in shaker type mill (Spex 8000). There was no problem with cold welding in the mechanical alloying of titanium alloys containing Mg. In the paper a possibility of porous materials preparation by sintering in temperature higher than boiling temperature of Mg has been shown. This thermal dealloying method could be an alternative to space holder technique.
ACCESSION #
99622109

 

Related Articles

  • INTERPRETATION OF OPEN CIRCUIT POTENTIAL OF TWO TITANIUM ALLOYS FOR A LONG TIME IMMERSION IN PHYSIOLOGICAL FLUID. Jiménez, Y. Santana; Gil, M. Tejera; Guerra, M. Torrado; Baltes, L. S.; Rosca, J. C. Mirza // Bulletin of the Transilvania University of Brasov, Series I: Eng;2009, Vol. 2 Issue 51, p197 

    Increased use of titanium alloys as biomaterials is occurring due to their superior biocompatibility and high corrosion resistance in the human body. Ti-6Al-7Nb was investigated compared with Ti-6Al-4V and two surface treatments were applied for increasing the bioactivity of the alloy. The...

  • Passivity and Corrosion of Cu� xZn ( x = 10�40 wt%) Alloys in Borate Buffer Containing Chloride Ions. Mikic, T.; Milo�ev, I.; Pihlar, B. // Journal of Applied Electrochemistry;Oct2005, Vol. 35 Issue 10, p975 

    The electrochemical behaviour of Cu� xZn alloys and of Cu and Zn metals was studied by cyclic voltammetry and chronopotentiometry in borate buffer, pH = 9.2, with and without the addition of chloride ions in the range from 0.01 m to 1 m. In general, the shape of voltammograms of four...

  • Effect of low additives of calcium on corrosion resistance of alloys of the Mg - Al - Zn - Mn system. Koltygin, A.; Bazlova, T. // Metal Science & Heat Treatment;Mar2012, Vol. 53 Issue 11/12, p584 

    The effect of calcium (0.2 - 0.5 wt.%) on the resistance of a liquid and solid magnesium alloy to oxidation is investigated. It is shown that calcium may be used as a microalloying additive raising the corrosion resistance of magnesium alloys not only at a high temperature but also at the...

  • Vacancy segregation in the initial oxidation stages of the TiN(100) surface. Zimmermann, Janina; Finnis, Mike W.; Ciacchi, Lucio Colombi // Journal of Chemical Physics;4/7/2009, Vol. 130 Issue 13, p134714 

    The well-known corrosion resistance and biocompatibility of TiN depend on the structural and chemical properties of the stable oxide film that forms spontaneously on its surface after exposure to air. In the present work, we focus on the atomistic structure and stability of the TiN(100) surface...

  • Mechanical Characterization of CoCrMo Alloys Consisting of Different Palladium Ratios Produced by Investment Casting Method. SAHIN, O.; UZUNOGLU, S.; SAHIN, E. // Acta Physica Polonica, A.;Aug2015, Vol. 128 Issue 2B, pB-149 

    CoCrMo alloys are one of the most commonly used materials for hip arthroplasty, knee and dental because of its mechanical properties, corrosion resistance, wear resistance and biocompatibility. In this study, CoCrMo alloys consisting of 1.68 to 4.33%Pd are produced by investment casting process...

  • Try Testing Gold. Drewry, Jennifer M. // Footsteps;Jan/Feb2000, Vol. 2 Issue 1, p16 

    Presents an experiment testing the ability of gold to withstand corrosion.

  • ABOUT 2K SYSTEMS.  // Products Finishing;Aug2012, Vol. 76 Issue 11, p19 

    The article offers information on the two-component paints known as 2K paints that are characterized by a very high level of corrosion resistance which benefits include time and cost savings due to elimination of manual weighing and mixing.

  • Coating saves steel bars in salt-water environment. Schneider, Richard T. // Hydraulics & Pneumatics (1996);Jul97, Vol. 50 Issue 7, p14 

    Focuses on the design of over 100 piston rods that can be found at the Escaut surge-barrier dam in the North Sea, specially fabricated to survive the corrosive salt-water environment.

  • CORROSION BEHAVIOUR IN RINGER SOLUTION OF BIOCOMPATIBLE MATERIALS, 315L AND Ti6Al4V. OANCEA, Lisette; VETELEANU, Ana; NASCOV, Victor; CHICHERNEA, Florin; URSUTIU, Doru; SAMOILA, Cornel // Metalurgia International;2013 Special Issue Nr. 5, Vol. 18, preceding p5 

    The purpose of this study is to test the corrosion behavior of stainless steel in simulated biological environment in comparison with the titan base alloy. Thus establishing the usage limits of stainless steel hl medical field while the extensive use of titan based alloys is excellent due to its...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics