Study on Optimal Roadways Layout of Contiguous Seams by Simultaneous Mining

Chun-lei, ZHANG; Yong, ZHANG
October 2014
Coal Science & Technology (0253-2336);Oct2014, Vol. 42 Issue 10, p53
Academic Journal
In order to determine No. 3 and No. 4 coal seam roadway layout of one mine during simultaneous mining, combination with the geological condition of coal seam, firstly, by the theoretical analysis, the roadways of the mining face mined simultaneously were arranged outward staggered. Then the numerical simulation FLAC3D was adopted to optimize the distance between roadways of contiguous seams by mining simultaneously, and the rational separation distance of roadways was 20 . Finally, through the coal mine practice, the roof-to-floor convergence was 150 mm, and the convergence of two side walls was 120 mm in the lower roadway of No.3409 working face. The influence scope was limited in the range of 60 m in front of working face. The layout of roadways in contiguous seams by simultaneously mining was rational and the deformation of surrounding rock of roadways was controlled effectively.


Related Articles

  • Coal Mining with Triple-section Extraction Process in Stagger Arrangement Roadway Layout Method. Zimo Cui; Baozhu Liu; Jingli Zhao; Emmanuel Chanda // AIP Conference Proceedings;2017, Vol. 1820 Issue 1, p1 

    This paper introduces the Triple-section extraction process in the three-dimensional roadway layout of stagger arrangement method for longwall top-coal caving mining. This 3-D roadway layout of stagger arrangement method without coal pillars, which arranged the air intake roadway and air return...

  • 千米深井强突出煤层群井筒快速揭煤技术. 王满 // Coal Science & Technology (0253-2336);May2015, Vol. 43 Issue 5, p71 

    According to the low permeability and high outburst features of the deep seam in Huainan Mining Area and the high danger during the seam opening process,based on the contiguous high outburst seams in East No.2 Mine Auxiliary Shaft of Panyi Mine as a study object and the detail and reliable...

  • Study of the trellis support of working face roadway in impact coal seam. Yukai Lv; Cong Jiang; Yaodong Jiang // Advanced Materials Research;2014, Vol. 941-944, p2558 

    Coal bumps happened many times in mining at No. 5 seam of Tangshan coal mine. Strengthen the roadway's support of working face can effectively reduce disaster losses. With the research background of the 3654 working face, the mine pressure monitoring for the existing support form of roadway has...

  • Coal Mine Roadway Stability in Soft Rock: A Case Study. Shen, Baotang // Rock Mechanics & Rock Engineering;Nov2014, Vol. 47 Issue 6, p2225 

    Roadway instability has always been a major concern in deep underground coal mines where the surrounding rock strata and coal seams are weak and the in situ stresses are high. Under the high overburden and tectonic stresses, roadways could collapse or experience excessive deformation, which not...

  • The study on roadway layout in coordination of mining coal seams base on failure of floor strata. ZHANG Yong; ZHANG Chun-lei; WEI Chun-chen; LIU Ya-dong; ZHANG Shi-qing; ZHAO Jian-jian // Advanced Materials Research;2014, Issue 889-890, p1362 

    In order to make sure the reasonable roadway layout in lower seam of close coal mining group coordination in Lijiahao coal mine, firstly, applying the theoretical analysis and geological radar detection to get the influence depth of mining from the up coal seam 2-2 to the floor is about 20m, the...

  • The Application of Crossing and Grid Drainage Boreholes in Floor Tunnel for Coal Roadway Safety Tunneling. Hongqing Zhu; Beifang Gu; Minbo Zhang; Chao Yu; Zhen Zhang // Advanced Materials Research;2014, Vol. 962-965, p1169 

    In order to reduce the danger of single coal seams outburst during the tunneling in coal roadway and ensure the tunneling of coal seams, this text analyzed the mechanism of crossing drilling against outburst; studied the area measures of floor tunnel crossing and grid drainage boreholes in coal...

  • Roadway Stagger Layout for Effective Control of Gob-Side Rock Bursts in the Longwall Mining of a Thick Coal Seam. Li, Zhen-lei; Dou, Lin-ming; Cai, Wu; Wang, Gui-feng; Ding, Yan-lu; Kong, Yong // Rock Mechanics & Rock Engineering;Feb2016, Vol. 49 Issue 2, p621 

    The article discusses the staggered roadway layout for controlling gob-side rock bursts (GRB) at the Yuejin coal mine (YCM) in Yima City, China. The static stress joined with dynamic stress in coal seams in mines will result into a rock bursts. An appendix for the roadway stagger layout method...

  • Study on Deformation Law of Overlying Roadway Under Condition of Lower Protective Seam Mining. ZHANG Wang-lei; XIONG Zu-qiang; WANG Hong-yan; ZHANG Yao-hui // Coal Science & Technology (0253-2336);2014, Vol. 42 Issue 5, p9 

    In order to study the influence law of overlying roadway caused by lower protective seam mining, take the Liuxibeier Roadway of No. 3 coal seam of Guozhuang Mine as research object, the deformation of surrounding rock was measured. The results showed that the Liuxibeier Roadway was influenced by...

  • Gas outburst disasters and the mining technology of key protective seam in coal seam group in the Huainan coalfield. Wang, Haifeng; Cheng, Yuanping; Yuan, Liang // Natural Hazards;Jun2013, Vol. 67 Issue 2, p763 

    Coal and gas outburst disasters in coal seams are becoming more serious as coal mines extend deeper underground in China. To aid gas control in high-gas outburst coal seam group, this study performed research based on the geological conditions of the Xinzhuangzi coal mine in the Huainan...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics