TITLE

Study on Desorption Index Sensitivity of Drilling Cuttings from Tunlan Mine

AUTHOR(S)
Xu, GAO; Lang, ZHANG; Dong, WANG; Long-yong, SHU
PUB. DATE
October 2014
SOURCE
Coal Science & Technology (0253-2336);Oct2014, Vol. 42 Issue 10, p41
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In order to establish and improve the coal and gas outburst prevention system of Tunlan Mine ,relative sensitivities of drilling cuttings about gas desorption index K1 and Δh2 were determined. Based on high pressure set volume adsorption and desorption experiments and simulation measurements of the drilling cuttings and desorption index ,the study found that the gas adsorption balance pressure and gas desorption volume of each seam sample from Tunlan Mine was in a power function relationship,and K1 and Δh2 was in a linear relationship. The first minute gas desorption volume of each seam sample from Tunlan Mine was more obvious than the fourth and fifth minute by the control function of desorption balance pressure. With the site measured of K1 and Δh2 and combined with the minimum mean variance method analysis,the paper hold that the K1 of each seam in Tunlan Mine was more sensitive than Δh2 index.Therefore,when predicting the outburst danger was conducted for each team in Tunlan Mine, the drilling cutting desorption index K1 should be selected as the main index ( sensitive index ) and Δh2 should be selected as an auxiliary index.
ACCESSION #
99618701

 

Related Articles

  • Determination and Application on Critical Value of Drilling Cuttings Gas Desorption Indices. KONG Sheng-Li; CHENG Long-Biao; WANG Hai-Feng; HOU Hong-Xing // Coal Science & Technology (0253-2336);Aug2014, Vol. 42 Issue 8, p56 

    In order to define the critical value of drilling cuttings gas desorption indices which predicted gas outburst risk,based on the physical meaning explanation of drilling cuttings gas desorption indices and the desorption regulation of the No.2 coal seam in Tunlan Coal Mine,the relationship of...

  • Effect of Water Invasion on Outburst Predictive Index of Low Rank Coals in Dalong Mine. Jiang, Jingyu; Cheng, Yuanping; Mou, Junhui; Jin, Kan; Cui, Jie // PLoS ONE;7/10/2015, Vol. 10 Issue 7, p1 

    To improve the coal permeability and outburst prevention, coal seam water injection and a series of outburst prevention measures were tested in outburst coal mines. These methods have become important technologies used for coal and gas outburst prevention and control by increasing the external...

  • Analysis of Antireflection and Outburst Prevention Mechanism on Hydrofracture Technology in Soft Coal Seam. Yi Lei; Wenbin Wu // Applied Mechanics & Materials;2014, Issue 556-562, p597 

    Base on the hydraulic fracturing field test in soft coal seam, the rule which the cutting quantity is added and the drilling gas desorption index K1 is decreased, is analyzed from the perspective of physical-mechanical properties and adsorption-desorption law is changed, etc. And gas adsorption...

  • Managing Drill Cuttings. ZOLLER, J.; SCHMIDT, R.; STIELS, C.; KAISER, S. // Pollution Engineering;Sep2014, Vol. 46 Issue 9, p34 

    Drill cuttings are an ever increasing waste stream generated by the oil and gas industry. In an attempt to limit the adverse environmental impact caused by drilling fluids present in the drill cuttings, efforts are made worldwide to convert the drill cuttings to a non-hazardous material, which...

  • Indexable insert drilling system.  // T & P: Tooling & Production;Jun2001, Vol. 67 Issue 3, p20 

    Evaluates an indexable insert drilling system from Valenite Inc. Key features of the system; Range of sizes offered; Information on Top Cut Plus; Applications of the drills.

  • Cutting performance of an indexable insert drill for difficult-to-cut materials under supplied oil mist. Okada, Masato; Asakawa, Naoki; Sentoku, Eisuke; M'Saoubi, Rachid; Ueda, Takashi // International Journal of Advanced Manufacturing Technology;Apr2014, Vol. 72 Issue 1-4, p475 

    In this study, the cutting performance of an indexable insert drill with an asymmetric geometry for cutting difficult-to-cut materials was investigated. A solid twist drill with a symmetric geometry was used to compare the cutting characteristics. The cutting characteristics were evaluated using...

  • Analyses of Cascading Failure in Mine Ventilation System and Its Effects in a Serious Mine Gas Explosion Disaster. Zhou, F.; Wei, L.; Chen, K.; Cheng, J. // Journal of Failure Analysis & Prevention;Oct2013, Vol. 13 Issue 5, p538 

    In 2009, a serious gas explosion happened in Tunlan coal mine at Shanxi province, P.R. China, which claimed the lives of 78 miners. 114 miners got injured, and nearly 4 million dollars of economic loss was reported. According to the investigation report, the mine gas explosion was originally...

  • Indexable Drills.  // Production Machining;Jan2009, Vol. 9 Issue 1, p49 

    The article evaluates the GKI Cutting Tools' indexable insert drills from GKI Inc.

  • Stepping Up To Hole-Making Challenges. Albert, Mark // Modern Machine Shop;Jun2005, Vol. 78 Issue 1, p54 

    Focuses on the CoroDrill 880 indexable insert drill from Sandvik Coromant. Features of the drill; Information on the Step Technology used for the drill; Benefits of combining balanced entry, low radial cutting forces and minimal deflection properties of a drill.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics