Line Vulnerability Assessment on Power Grid Based on Combination Weighing Method

ZENG Xin; CHEN Yanzhen; YANG Qi; MIAO Miao; REN Jianwen; LI Xuanxuan
July 2014
Advanced Materials Research;2014, Vol. 986-987, p349
Academic Journal
To study the mechanism of cascading failures in a power grid and find out the key vulnerable lines propagating cascading failures, entropy theory and analysis hierarchy process were applied in entropy-weighted fuzzy comprehensive evaluation model, and information of objective data and the subjective opinion of experts were combined in the model to implement effective evaluation and sorting of line vulnerability. The article builds a index system that contains voltage deviation, power flow coefficient and electric betweenness in considering the network structure and real-time running state of the system, and then the lines vulnerability assessment method is proposed .This method can be used to help power grid designers and operators spot the lines prone to black-out. Numerical example results show that the proposed indicators can overcome the deficiency of existing indicators not taking the state of the grid structure and operation into account which proves the assessment method is feasible.


Related Articles

  • Modeling and simulation of grid-connected photovoltaic system based on PSCAD. Xiansui Han; Qihui Liu // Advanced Materials Research;2014, Vol. 986-987, p367 

    In order to investigate the impacts of large scale PV power plants on the stability of power system, dynamic PV models are of particular interest to the industry for simulating large-scale power systems. The transient model of large scale grid-connected PV generation system was given based on...

  • Research on Power System Stochastic Economic Dispatch Considering Interruptible Load and Wind Power. Xiaoyi MA; Wei WEI // Advanced Materials Research;2014, Vol. 986-987, p493 

    Interruptible load was an important measure for demand response which can effectively implement the interaction between grid side and demand side. It's also the important feature and component of smart grid. This paper established a stochastic economic dispatch model which brought both...

  • An Improved FCM Algorithm Based on Subtractive Clustering for Power Load Classification. Rui Dong; Mingxiang Huang // Advanced Materials Research;2014, Vol. 986-987, p206 

    FCM is used in many power load classification currently, but it also has some shortcomings. This paper give an algorithm based on Subtractive Clustering and improved Fuzzy C-means Clustering (SUB-FCM) to solve this problem. This algorithm use subtractive clustering to initialize the cluster...

  • Medium and Long Term Load Forecasting of Power System Based on Interval Taylor Model Arithmetic. ZHENG Zhijie; WANG Shouxiang; WANG Yan; ZHAO Long; Zhang Jie // Advanced Materials Research;2014, Vol. 986-987, p354 

    For long time span, the impact of many factors, uncertainties and other characteristics of mid-long term load forecasting, as well as the over-estimation of interval arithmetic, a mid-long term load forecasting method based on interval Taylor model algorithm was presented. In order to avoid...

  • Short-term Load Forecasting Based on GA-Elman Model. Wenxia YOU; Junxiao CHANG; Ziheng ZHOU; Ji LU // Advanced Materials Research;2014, Vol. 986-987, p520 

    Elman Neural Network is a typical neural-network which shares the characteristics of multiple-layer and dynamic recurrent, and it's more suitable than BP Neural Network when it's applied to forecast the short-term load with periodicity and similarity. To solve the problem that Elman Neural...

  • A Research on Fixed Series Compensation. QIN Li-jun; XIONG Chao // Advanced Materials Research;2014, Vol. 986-987, p192 

    Series compensation can improve the line efficiency significantly, reduce line loss and raise line voltage obviously. The paper introduces the basic principles of series compensation, and studies the influence of series compensation's installation position on compensation effect, the loss...

  • Fuzzy ranking based non-dominated sorting genetic algorithm-II for network overload alleviation. Pandiarajan, K.; Babulal, C.K. // Archives of Electrical Engineering;Sep2014, Vol. 63 Issue 3, p367 

    This paper presents an effective method of network overload management in power systems. The three competing objectives 1) generation cost 2) transmission line overload and 3) real power loss are optimized to provide pareto-optimal solutions. A fuzzy ranking based non-dominated sorting genetic...

  • Arctan power frequency droop for power electronics dominated microgrids. Rowe, C. N.; Summers, T. J.; Betz, R. E. // Australian Journal of Electrical & Electronic Engineering;2013, Vol. 10 Issue 2, p157 

    The microgrid is an environment constructed with the aim of controlling local distributed resources. The most common power flow control technique utilised in a power electronics dominated or standalone microgrid is a technique known as power frequency droop. This paper develops a novel droop...

  • Research on electricity load of three industries and residents' life Zhichao RENa, Kaijiang CAOb Research on electricity load of three industries and residents' life Zhichao RENa, Kaijiang CAOb. Zhichao REN; Kaijiang CAO // Advanced Materials Research;2014, Vol. 986-987, p474 

    In recent years, strategic adjustment of economic structure is as the main direction of accelerating transformation of economic development mode in Sichuan province of China. Electricity load characteristics and its development trend could reflect industries' structure of Sichuan province. The...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics