TITLE

Geometric and Static Analysis of the Historical Truss in Village Belá Dulice

AUTHOR(S)
Gocál, Jozef; Krušinsky, Peter; Capková, Eva; Kekeliak, Miloš
PUB. DATE
July 2014
SOURCE
Advanced Materials Research;2014, Vol. 969, p199
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Following a recently realized area structural-hi storical research on historical truss constructions in the regions of Liptov, Turiec, Orava and Kysuce, a project named "Geometric analysis of historical truss constructions on the area of Slovak Republic" has arisen. The first truss chosen for the analysis is the one of the Roman Catholic Church in Belâ Dulice. This article presents its geometric analysis, as well as the results of the static analysis, focused on static behaviour of the roof superstructure. The attention is paid to the effect of slip in joints on the load redistribution in the structure as well as on the deformation of the main bearing members.
ACCESSION #
99439045

 

Related Articles

  • Pushover analysis of RC bridge designed according to EN 1998-2. Dzolev, I.; Ladjinovic, D.; Raseta, A.; Radujkovic, A. // Construction of Unique Buildings & Structures;2014, Vol. 24 Issue 9, p116 

    Contemporary structural design implies nonlinear behavior of ductile members for design seismic action and thus, the application of nonlinear analysis is required. Nonlinear static pushover analysis enables determination of nonlinear deformations and ductility demands in previously defined...

  • Evaluation of CHS tubular KK joints. Silva Nobre, David; de Lima, Luciano R. O.; da S. Vellasco, Pedro C. G.; Costa-Neves, Luis F.; da Silva, André T. // Latin American Journal of Solids & Structures;2015, Vol. 12 Issue 11, p2143 

    The widespread use of tubular sections in regions like Western Europe and North America in addition structural and aesthetical reasons can be attributed to the high degree of development of their production technology. Despite this fact their use in Brazil in the past was limited to a few...

  • Concept of Tuning and Constructing Mass-Customized Generative Surfaces. Markov, Ivan // International Journal of Space Structures;Jun2010, Vol. 25 Issue 2, p117 

    Advances in the digital arena have provided additional tools for the exploration of architectural designs and testing of architectural ideas. New tools based on parametric modeling allow architects and engineers to investigate designs of generative forms and surfaces of previously unseen...

  • Influence of Fasteners Disposition on Behaviour of Timber-Framed Walls with Double Fibre-Plaster Coating Boards. Kuhta, M.; Premrov, M. // American Journal of Applied Sciences;2008, Vol. 5 Issue 1, p1 

    This paper provides experimental analysis of timber-framed walls, coated with double fibre-plaster coating boards fastened to the timber frame. As the walls under a horizontal load actually behave like a deep composite beam, the fasteners disposition is very important and directly influences...

  • A New Structure Design Method for Improve Modular Joint Output Performance in Modular Robot. Xiao Li; Hanxu Sun; Yingwen Tang; Jingzhou Song // Applied Mechanics & Materials;2014, Issue 635-637, p1299 

    A novel structure design method to improve the output performance in course of modular robot is presented in this paper. The new design parameter of modular joint is defined based on analysis of existing joint. Output torque and Max speed is increased by means of different Brushless...

  • Stiffness and strenght analysis of corner joint. Horman, Izet; Hajdarevic, Seid; Martinovic, Sandra; Vukas, Nikola // TTEM- Technics Technologies Education Management;2010, Vol. 5 Issue 1, p48 

    In this paper is presented computational analysis of the stiffness and strength of woden corner joints. The equations for momentum balance are discretized by the finite volume technique. An accuracy of method was verified by comparing numerical results with experimental data. The results show...

  • A Novel Deployable Emergency Bridge. Wu Xinyan; Huang jianjun; Luo Anping // Applied Mechanics & Materials;2014, Vol. 730, p33 

    This paper explores the design of a new type of deployable bridge system composed of a scissor-like deployable element, the walking-slab, the joint, sleeve-pole, cable and lock-device, driving cable etc. Both geometric principles and dynamic analysis are discussed. Then, a 2-m scaled prototype...

  • Plate wave transmission/reflection at arbitrarily shaped obstructions. Roberts, R. A. // AIP Conference Proceedings;5/18/2012, Vol. 1430 Issue 1, p201 

    A theoretical study is presented for guided wave transmission/reflection in plates containing geometric obstructions such as joints and attachments. The problem considers semi-infinite plates joined by a body of arbitrary geometry. Boundary integral equations methods are applied to determine...

  • Exploratory study of small timber trusses constructed with through-bolt and cross-pipe heel connectors. Eckelman, C. A.; Haviarova, E.; Erdil, Y. // Forest Products Journal;Mar2007, Vol. 57 Issue 3, p39 

    Throughout the world, there is a need for simple, strong, yet inexpensive connectors that can be used to fabricate trusses from natural small-diameter tree stems as well as squared stems without extensive premachining of the joint area. A connector that might satisfy these requirements is the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics