TITLE

Theoretical Study on Seismic Behavior of LYTAG Concrete

AUTHOR(S)
Linchun Zhang
PUB. DATE
June 2014
SOURCE
Advanced Materials Research;2014, Vol. 936, p1414
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In order to estimate seismic behavior of LYTAG concrete, the seismic behavior of ordinary concrete have been studied in comparison with LYTAG concrete in this article. At first it discusses the advantages of LYTAG concrete, and then it draws following conclusions through the contrast tests of LYTAG concrete and ordinary concrete and the method of finite element analysis. The seismic performance of Lytag concrete is better than that of ordinary concrete. LYTAG concrete has better social and economic benefits than ordinary concrete from the aspects of seismic fortification.
ACCESSION #
99438470

 

Related Articles

  • Numerical Simulation of the Fiber Pulled out from Steel-fiber Concrete. Liu Jun // Applied Mechanics & Materials;2014, Vol. 723, p427 

    ANSYS finite element analysis software is used to simulate the pull-out process of hooked-end steel fiber from concret in this paper. The contact element is adapted to simulate the interface contact of fiber and concrete, the effect of concrete matrix damage is ignored, the plastic deformation...

  • Design of a new high lateral resistance sleeper and performance comparison with conventional sleepers in a curved railway track by means of finite element models. Montalbán Domingo, Laura; Real Herraiz, Julia I.; Zamorano, Clara; Real Herraiz, Teresa // Latin American Journal of Solids & Structures;Dec2014, Vol. 11 Issue 7, p1238 

    The lack of lateral resistance in a curved railway track can produce misalignment problems due to the centrifugal forces when the trains pass through. Moreover, most of the times continuous welded rails (CWR) are used in nowadays railway tracks, which can induce the track buckling as a result of...

  • Slots Geometry Influence on the Air gap Magnetic Field Distribution. ZAGHDOUD, BELLAL; SAADOUN, ABDALLAH // WSEAS Transactions on Circuits & Systems;Dec2013, Vol. 12 Issue 12, p361 

    Prediction and performance analysis of electrical machines depend mainly on the accuracy in the evaluation of the magnetic field linking the different parts of the machine. This paper presents the influence of the slots geometry on permanent magnet synchronous machine (PMSM) magnetic field...

  • Evaluation of Seismic Behavior in Non-Seismic Concentrically Braced Frames. Hee Jin Yeom; Eun Bi Jung; Jung Han Yoo // Applied Mechanics & Materials;2015, Vol. 749, p373 

    SCBFs (Special Concentrically Braced Frames) have been praised for considerable strength, high lateral stiffness, economic feasibility and good performance of seismic loads, which make engineers widely use SCBF as lateral-load resisting systems in buildings and have researchers develop design...

  • The performance comparison of Oxford and triangle flexure bearings. Zhou, Wenjie; Wang, Longyi; Gan, Zhihua; Wang, Renzhuo; Qiu, L. M.; Pfotenhauer, John // AIP Conference Proceedings;6/8/2012, Vol. 1434 Issue 1, p1149 

    Flexure bearings are widely used in linear compressors because of their high radial stiffness and long life. In this paper, a Finite Element Method (FEM) is employed to analyze the characteristics of Oxford and triangle flexure bearings. These two kinds of plate springs are analyzed separately...

  • An efficient Bouc & Wen approach for seismic analysis of masonry tower. Facchini, Luca; Betti, Michele // Frattura e Integrita Strutturale;2014, Vol. 8, p139 

    The assessment of existing masonry towers under exceptional loads, such as earthquake loads, requires reliable, expedite and efficient methods of analysis. These approaches should take into account both the randomness that affects the masonry properties (in some cases also the distribution of...

  • Torsional design method of bottom frame structure with irregular plane. Hongyu Deng; Baitao Sun // Applied Mechanics & Materials;2014, Vol. 716-717, p460 

    For the study of irregular plane adverse impacts on the bottom frame structure seismic performance, in this paper, a serious damaged bottom frame structure in Wenchuan earthquake is taken as the research object, and a comparative calculation model is designed and elasto-plastic time-history...

  • Designing of a Permanent Magnet and Directly Driven Synchronous Generator for Low Speed Turbines. Tarlmer, I.; Yuzer, E. O. // Electronics & Electrical Engineering;2011, Issue 112, p15 

    In this study, a radial flux generator which is driven directly for low speed turbines and structured by permanent magnets has been designed and analyzed by finite elements methods. The designed generator model has got the good results which show high performance characteristics of a permanent...

  • Adaptive Nodeless Variable Finite Element Method for Convectively-Cooled Solid. Sutthikom Puntimakornkij; Atipong Malatip; Pramote Dechaumphai // Journal of Engineering & Technology;Jul-Dec2013, Vol. 3 Issue 2, p65 

    An adaptive nodeless variable finite element method for analysis of convectively-cooled solid is presented. The method solves two-dimensional heat transfer in solid coupling with one-dimensional heat transfer of fluid flow in channel. The nodeless variable finite element concept is introduced to...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics