Pressure comfort Research of women's wool underwear

Lei Xia; Ling Yin
October 2014
Advanced Materials Research;2014, Issue 1048, p207
Academic Journal
The objective of this study was to investigate the relationship between fabric property and clothing pressure of knitted underwear, using objective pressure evaluates method. Three kinds of fabric for knitted underwear were tested on the thickness, stretching property and elasticity property, and then three same style of underwear which were made by three kinds of fabric were tried on by pressure dummy. Clothing pressure of three different points was measured and recorded. The linear relationship between fabric property and clothing pressure of knitted underwear was obtained. Results show that Clothing Pressure of knitted underwear is negative correlation with elastic recovery rate of knitted fabric.


Related Articles

  • Pressure distribution Study of women's wool underwear. Lei Xia; Ling Yin // Advanced Materials Research;2014, Issue 1048, p211 

    The objective of this study was to investigate the pressure distribution on body parts, seven body points and different test actions were chosen, and clothing pressure of seven different points was measured and recorded. Seven test points pressure value on each test action were analyzed. Results...

  • Mechanics analysis of flexible base Pavement Structure. Liya Su // Applied Mechanics & Materials;2014, Issue 580-583, p632 

    With the rapid development of traffic cause in our country, the operating requirement of driving load factors to pavement structure become higher and higher. The Semi-rigid base asphalt pavement structure exposed some defects and shortcomings, so the study of flexible base asphalt pavement...

  • Water Resistance and Tensile Strength of High Density Polyethylene (HDPE) Composites. NURUL ATIQAH, Mohd Ayob; MANSUR, Ahmad; NURUL NADIA, Mohd Khairuddin // Advanced Materials Research;2016, Vol. 1134, p44 

    In this paper, three type of natural-fibre reinforced polyethylene were produced. They are the coconut coir reinforced polyethylene (RPCC), kenaf reinforced polyethylene (RPKC) and bamboo reinforced polyethylene (RPBC). Water absorption test, thickness swelling test and tensile test of the...

  • Transition from planar to island growth mode in SiGe structures fabricated on SiGe/Si(001) strain-relaxed buffers. Shaleev, M. V.; Novikov, A. V.; Yurasov, D. V.; Hartmann, J. M.; Kuznetsov, O. A.; Lobanov, D. N.; Krasilnik, Z. F. // Applied Physics Letters;10/8/2012, Vol. 101 Issue 15, p151601 

    The specifics of the two-to-three dimensional growth mode transition of pure Ge on SiGe/Si(001) strain-relaxed buffers (SRBs) were investigated. It was shown that the critical thickness for elastic relaxation is influenced not only by the lattice mismatch between the substrate and the film but...

  • THE INFLUENCE OF HUMIDITY ON THE TENSILE STRENGTH AND BREAKING ELONGATION OF YARNS FOR KNITTING SOCKS. Vlad, Dorin; Coldea, Alina Mihaela // Annals of the University of Oradea. Fascicle of Textiles, Leathe;2013, Vol. 14 Issue 2, p80 

    Tensile property of textile yarn is a prime important parameter in establish the suitability for any particular application. Breaking strength, elongation, elastic modulus, abrasion resistence etc. are some important factors which will represent the performance of the yarn. It is therefore of...

  • HEAT TREATMENTS INFLUENCE ON THE BREAKING TORSION OF WOOL TYPE FIBERS. BORDEIANU, Demetra Lăcrămioara; HRISTIAN, Liliana; VÎLCU, Adrian // Annals of the University of Oradea. Fascicle of Textiles, Leathe;2014, Vol. 15 Issue 2, p17 

    In order to convert the textile fibers in yarns, these must be subjected to twisting operation which confers them a certain tensile strength. Twisting also results in certain effects, such as crepe effect. The importance of knowing the twisting behavior consists in the possibility to avoid fiber...

  • Jack's Blog.  // Engineering & Technology (17509637);Apr2015, Vol. 10 Issue 3, p102 

    A blog related to knitting woollen handicrafts is discussed.

  • Effect of Different Thickness of Core Layer on Tensile Properties of Laminated Natural Rubber Latex Film. SIDEK, MUFIDAH MD; RASHID, AZURA A.; AZAHARI, BAHARIN // Advanced Materials Research;2014, Vol. 1024, p259 

    Laminated natural rubber latex (NR) latex for mould cleaning application was prepared by arranging half-cured latex sheets with various thicknesses of core layer. Laminated layers consist of outer layer (NR latex films with cleaning agent) and core layer (waste natural NR latex film). The core...

  • TECHNICAL-ECONOMICAL EVALUATION OF BEECH PLYWOOD BONDING. Brozek, Milan // Engineering for Rural Development - International Scientific Con;2014, p168 

    The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the beech three-ply wood of 4 mm thickness was used (according to CSN EN 636). The test samples of 100x25 mm size were cut out from...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics