TITLE

SiGe resonant tunneling hot-carrier transistor

AUTHOR(S)
Rhee, S. S.; Chang, G. K.; Carns, T. K.; Wang, K. L.
PUB. DATE
March 1990
SOURCE
Applied Physics Letters;3/12/1990, Vol. 56 Issue 11, p1061
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A SiGe three-terminal hot-hole transistor using a double-barrier resonant tunneling structure as an emitter is fabricated. Injected carriers from the emitter are transferred near-ballistically into the collector through a thin base. The demonstrated main feature of the device is a controllable negative differential resistance in the collector current. Utilizing the high-speed characteristics of the tunneling process and negative differential resistance, integration of the device into Si technology could find applications in the areas of high-speed digital circuits, frequency multipliers, and tunable oscillators/amplifiers.
ACCESSION #
9833778

 

Related Articles

  • Resonant tunneling hot-electron transistor with current gain of 5. Mori, Toshihiko; Ohnishi, Hiroaki; Imamura, Kenichi; Muto, Syunichi; Yokoyama, Naoki // Applied Physics Letters;12/29/1986, Vol. 49 Issue 26, p1779 

    By optimizing its structure, we have improved the current gain and collector-current peak-to-valley ratio of a resonant tunneling hot-electron transistor. The device has an asymmetric resonant tunneling barrier with an optimal well thickness to attain a higher peak-to-valley ratio for the...

  • Room temperature operation of a high output current magnetic tunnel transistor. van Dijken, Sebastiaan; Jiang, Xin; Parkin, Stuart S. P. // Applied Physics Letters;5/6/2002, Vol. 80 Issue 18, p3364 

    The structure and properties of a magnetic tunnel transistor with high current output at room temperature are presented. The transistor marries a two-terminal magnetic tunnel junction with an Al[sub 2]O[sub 3] tunnel barrier and a GaAs collector. The output current depends on the spin-dependent...

  • Mechanisms of carrier and energy injection in three-terminal laser structures. Tolstikhin, Valery I.; Khrenov, Gregory Yu. // Applied Physics Letters;10/7/1996, Vol. 69 Issue 15, p2157 

    The mechanisms of injection in the recently proposed three-terminal laser structures and the ability to effectively tune the energy yield associated with a single injected electron are analyzed, by means of the ensemble Monte Carlo simulations, with respect to a high-speed modulation using...

  • Temperature-dependent tunneling through thermally grown SiO[sub 2] on n-type 4H- and 6H-SiC. Waters, Richard; Van Zeghbroeck, Bart // Applied Physics Letters;2/21/2000, Vol. 76 Issue 8 

    The temperature dependence of field emission through thermally grown silicon dioxide (SiO[sub 2]) on n-type 4H and 6H silicon carbide (SiC) substrates is reported. Room-temperature SiO[sub 2]/SiC barrier heights, Φ[sub B], of 1.92 and 2.12 V are extracted for the 4H- and 6H-SiC samples,...

  • Quantum-well infrared photodetectors. Levine, B. F. // Journal of Applied Physics;10/15/1993, Vol. 74 Issue 8, pR1 

    Examines quantum-well infrared photodetectors including the device physics of the intersubband absorption and hot-carrier transport process for individual detectors. Modulation of intersubband absorption; Use of negative differential photoconductance and double-barrier coherent tunneling;...

  • Resonant-tunneling injection hot electron laser: An approach to picosecond gain-switching and.... Tolstikhin, Valery I.; Willander, Magnus // Applied Physics Letters;10/30/1995, Vol. 67 Issue 18, p2684 

    Analyzes the picosecond pulse generation from resonant-tunneling injection hot electron laser (RIHEL). Generation of well-shaped optical pulses; Improvement of the high-speed performance of laser diodes; Observation of the schematic cross section of a RIHEL.

  • Hot-electron transport in a graded band-gap base heterojunction bipolar transistor. Hayes, J. R.; Harbison, J. P. // Applied Physics Letters;8/8/1988, Vol. 53 Issue 6, p490 

    In this letter we report the direct observation of electron heating in an electric field using hot-electron spectroscopy. The device structure used for the study was a graded band-gap base heterojunction bipolar transistor, fabricated in the GaAs/AlGaAs semiconductor alloy system. A thermal...

  • Bistable hot electron transport in InP/GaInAs composite collector heterojunction bipolar.... Ritter, D.; Hamm, R.A. // Applied Physics Letters;7/6/1992, Vol. 61 Issue 1, p70 

    Investigates the bistable hot electron transport in indium-phosphorus/gallium-indium-arsenide composite collector heterojunction bipolar transistors (CCHBT). Characteristics of the CCHBT; Ways to suppress the bistability; Components of the CCHBT structures.

  • Role of hot electron base transport in abrupt emitter InP/Ga[sub 0.43]In[sub 0.53]As.... Ritter, Dan; Hamm, R.A. // Applied Physics Letters;5/30/1994, Vol. 64 Issue 22, p2988 

    Examines the role of hot electron base transport in abrupt emitter InP/Ga[sub 0.43]In[sub 0.53]As heterojunction bipolar transistor. Description of the diffusion constant of minority carrier electrons; Attribution of the short base transit time to the diffusion constant; Contribution of hot...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics