TITLE

Reduction of metal oxides by mechanical alloying

AUTHOR(S)
Schaffer, G. B.; McCormick, P. G.
PUB. DATE
July 1989
SOURCE
Applied Physics Letters;7/3/1989, Vol. 55 Issue 1, p45
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The chemical reduction of metal oxides by mechanical alloying with a strong reducing element has been investigated. Using x-ray diffraction to follow the reaction it was found that the mechanical alloying of CuO and Ca using toluene as a processing lubricant resulted in the formation of Cu. The mechanical alloying of CuO and ZnO together with Ca resulted in the formation of β’ brass.
ACCESSION #
9831848

 

Related Articles

  • Sol-gel combustion synthesis of magnetic MnFeO oxide and FeNi alloy: product dependence on the reduction ability. Cao, Jungang; Qin, Yuyang; Li, Minglun; Zhao, Shuyuan; Li, Jianjun // Applied Physics A: Materials Science & Processing;Dec2014, Vol. 117 Issue 4, p2019 

    Based on the sol-gel combustion method, stoichiometric Fe, Mn, Ni ions and citric acid were chosen as the initial reactants for the preparation of magnetic particles. Due to the different reduction ability of metal ions, completely different magnetic products (MnFeO oxide and FeNi alloy) were...

  • Selective Lean NOx Reduction over Metal Oxides. Kung, Mayfair C.; Kung, Harold H. // Topics in Catalysis;Apr2004, Vol. 28 Issue 1-4, p105 

    The present state of knowledge of NOx reduction under lean conditions over metal oxides is summarized in this review, with an emphasis on the reaction mechanism. Although a number of nitrogen-containing intermediates have been observed and implied, including organic nitro, nitrite, cyanide,...

  • BRAZING Q&A. Peaslee, R.L. // Welding Journal;Dec2003, Vol. 82 Issue 12, p51 

    Replies to an inquiry on the mechanism of oxide reduction in atmospheres of argon, vacuum and helium. Dissociation of metal oxides; Effects of low oxygen partial pressure.

  • Carbon-free dry reforming of methane to syngas over NdCoO3 perovskite-type mixed metal oxide catalyst. Choudhary, Vasant R.; Mondal, Kartick C.; Mamman, Ajit S.; Joshi, Upendra A. // Catalysis Letters;Mar2005, Vol. 100 Issue 3/4, p271 

    CoNdOx (Co/Nd = 1) is a highly promising catalyst for the carbon-free CO2 reforming of methane. Influence of the Co/Nd ratio on the catalyst performance in the CO2 reforming and also on the crystalline phases and reduction by temperature programmed reduction (TPR) of the CoNdOx catalyst has also...

  • Electrocatalytic Activity for CO, MeOH, and EtOH Oxidation on the Surface of Pt-Ru Nanoparticles Supported by Metal Oxide. Kwang-Sik Sim; Sin-Mook Lim; Hai-Doo Kwen; Seong-Ho Choi // Journal of Nanomaterials;2011, p1 

    This paper describes the electrocatalytic activity for CO, MeOH, and EtOH oxidation on the surface of Pt-Ru nanoparticles supported by metal oxide (Nb-TiO2-H) prepared for use in a fuel cell. To prepare Nb-TiO2-supported Pt-Ru nanoparticles, first, the Nb-TiO2 supports were prepared by sol-gel...

  • The preparation of Ni-P ultrafine amorphous alloy particles by chemical reduction. Jianyi Shen; Zheng Hu; Lifeng Zhang; Zhiyu Li; Yi Chen // Applied Physics Letters;12/30/1991, Vol. 59 Issue 27, p3545 

    Examines the use of chemical reduction in the preparation of nickel-phosphorous ultrafine amorphous alloy particles. Device use in determining the amorphous structure of the particles; Use of amorphous alloy films in substrate surface property modification; Importance of electroless plating in...

  • Substitutional carbon reduction in SiGeC alloys grown by rapid thermal chemical vapor deposition. Liu, C.W.; Tseng, Y.D. // Applied Physics Letters;10/11/1999, Vol. 75 Issue 15, p2271 

    Studies the substitutional carbon reduction in SiGeC alloys grown by rapid thermal chemical vapor deposition. Increases in the compressive strain in the originally strain-compensated alloys; Maximum amount of carbon reduction; Enhancement of the reduction of substitutional carbon.

  • Nitroarene reduction using Raney nickel alloy with ammonium chloride in water. Bhaumik, Kankan; Akamanchi, K.G. // Canadian Journal of Chemistry;Mar2003, Vol. 81 Issue 3, p197 

    Presents a study that examined the reduction of nitroarenes in high yields using a combination of Raney nickel alloy and ammonium chloride in water. Background on reagents used in nitroarene reduction; Analysis of the reaction mixture; Results and implications.

  • Ionic conductivity ageing behaviour of 10 mol.% ScO-1 mol.% CeO-ZrO ceramics. Omar, Shobit; Bonanos, Nikolaos // Journal of Materials Science;Dec2010, Vol. 45 Issue 23, p6406 

    The long-term ionic conductivity behaviour of samples of zirconia co-doped with 10 mol.% of ScO and 1 mol.% CeO is evaluated in oxidizing and reducing atmospheres at 600 °C. After 3,000 h, the sample kept in reducing atmospheres exhibits 20% loss in the ionic conductivity, while the sample...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics