TITLE

High coercivity in rapidly quenched Sm(Fe, T)12-type magnets

AUTHOR(S)
Singleton, E. W.; Strzeszewski, J.; Hadjipanayis, G. C.
PUB. DATE
May 1989
SOURCE
Applied Physics Letters;5/8/1989, Vol. 54 Issue 19, p1934
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The magnetic and structural properties of melt-spun Sm(FeT)12 alloys where T=Ti,V,Al,Cu,Ga,Si and with some containing small amounts of B and C have been studied. The samples are magnetically soft in the as-quenched state. High coercive fields are developed upon heating the samples at temperatures ranging from 750 to 1050 °C. The tetragonal ThMn12-type structure was found in all the alloys after annealing. The highest coercivities have been obtained on a Sm10Fe80Ti7.5B2.5 sample with Hc [bar_over_tilde:_approx._equal_to]7.7 kOe. These coercivities are much higher than those obtained previously and make these alloys good candidates for permanent magnet development.
ACCESSION #
9831099

 

Related Articles

  • Magnetic transition temperatures of the Sm-Gd alloy system. Rives, Carol J.; Anderson, Elmer E.; Arajs, Sigurds // Journal of Applied Physics;4/15/1991, Vol. 69 Issue 8, p5700 

    Presents a study which examined the magnetic transition temperatures for samarium-gadolinium alloys. Experiments; Results; Conclusion.

  • J-mixing linear theory for 3d–4f intermetallic compounds. Magnani, N.; Carretta, S.; Liviotti, E.; Amoretti, G. // Journal of Applied Physics;5/15/2003, Vol. 93 Issue 10, p7828 

    The linear theory for the magnetic anisotropy of 3d-4f intermetallic compounds is generalized in order to account for the J-mixing effects. This is particularly useful for samarium-based alloys, since Sm[SUP3+] has a small spin-orbit gap between the fundamental and the first excited multiplets....

  • Magnets keep their attraction when the heat is on. Payne, Doug // New Scientist;11/17/90, Vol. 128 Issue 1743, p30 

    Surveys the production of a new alloy made up of iron, samarium and nitrogen which possesses superior magnetic properties and is unrestricted by current patents covering permanent magnets. Research by Michael Coey called Concerted European Action on Magnets (CEAM); How the magnet is made.

  • Magnetic and structural properties of SmCo[sub 7-x]Cu[sub x] alloys. Al-Omari, I. A.; Yeshurun, Y.; Zhou, J.; Sellmyer, D. J. // Journal of Applied Physics;5/1/2000, Vol. 87 Issue 9, p6710 

    We report the structural and magnetic properties of SmCo[sub 7-x]Cu[sub x], where x=0, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7. X-ray diffraction shows that these alloys from the disordered hexagonal TbCu[sub 7]-type structure. For large values of x(x>=0.8) the hexagonal TbCu[sub 7]-type structure...

  • Dependence of magnetic properties on magnetic layer thickness in SmCo/Cr films. Takei, Shigeto; Otagiri, Yoshihiro // Journal of Applied Physics;4/15/1999 Part 2B of 2, Vol. 85 Issue 8, p6145 

    Provides information on a study which examined SmCo/Cr films prepared with the thickness of SmCo layer varying from 1 to 400 nanometers. Experimental procedure; Results.

  • Magnetic properties of the Sm-Gd alloy system. Rives, Carol J.; Anderson, Elmer E.; Arajs, Sigurds // Journal of Applied Physics;5/1/1990, Vol. 67 Issue 9, p5286 

    Reports on the results for a magnetic study of the samarium (Sm)-gadolinium (Gd) alloy system. Decrease in a ferromagnetic transition with Curie temperature for Gd-rich alloys; Ferromagnetic influence of Gd; Difficulty of performing neutron studies on Sm.

  • Microstructure and magnetic properties of Zn- or Sn-bonded Sm2Fe17Nx magnets. Rodewald, W.; Wall, B.; Katter, M.; Velicescu, M.; Schrey, P. // Journal of Applied Physics;5/15/1993, Vol. 73 Issue 10, p5899 

    Presents a study which examined the microstructure and magnetic properties of zinc- or tin-bonded samarium[sub2]iron[sub17]nitrogen[subx] magnets. Experimental methods; Nitrogenation of samarium iron [sub3] and samarium iron[sub2]; Dependence of the magnetic properties of zinc-bonded...

  • Phase formation in hypostoichiometric Sm...Fe... alloys modified with Ti and C. Shield, J. E.; Meacham, B. E. // Journal of Applied Physics;2/15/2000, Vol. 87 Issue 4, p2055 

    Presents information on a study which determined the phase formation, crystallization products, microstructure and magnetic behavior of iron-rich samarium-iron alloys modified with titanium and carbon. Crystallized microstructure of the alloys; Magnetic measurements of nitrided alloys.

  • Thin film SmCo magnets for use in electromagnetic microactuators. Budde, Thomas; Gatzen, Hans H. // Journal of Applied Physics;4/15/2006, Vol. 99 Issue 8, p08N304 

    Efficient magnetic microactuators require a deposition and patterning of a permanent magnetic material. A material that can be deposited in the range of up to a couple of 10 μm is sputtered SmCo. For the fabrication of magnetic microactuators, alternative substrate materials besides silicon...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics