TITLE

Threefold upconversion laser at 0.85, 1.23, and 1.73 μm in Er:YLF pumped with a 1.53 μm Er glass laser

AUTHOR(S)
Pollack, S. A.; Chang, D. B.; Birnbaum, M.
PUB. DATE
March 1989
SOURCE
Applied Physics Letters;3/6/1989, Vol. 54 Issue 10, p869
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Lasing action at 1.73, 1.23, and 0.85 μm was obtained by a threefold upconversion process in Er:YLF at 110 K using a 1.53 μm Er:glass pump laser. The 1.73 μm transition had the lowest threshold and highest pump conversion efficiency.
ACCESSION #
9830190

 

Related Articles

  • Simultaneous, multiple wavelength lasing of (Er, Nd):Y3Al5O12. Shi, W. Q.; Kurtz, R.; Machan, J.; Bass, M.; Birnbaum, M.; Kokta, M. // Applied Physics Letters;10/19/1987, Vol. 51 Issue 16, p1218 

    Simultaneous lasing of both Er3+ and Nd3+ ions in yttrium aluminum garnet is reported. The crystal was doped with 15% Er3+ and 1% Nd3+ ions. The Er3+ ions lased at 2.94 μm and the Nd3+ ions in a broadband from 1.01 to 1.15 μm with a strong peak at 1.064 μm. Significant ion-ion...

  • Shear Strength of Composite Bonded to Er:YAG Laser-prepared Dentin. Visuri, S. R.; Gilbert, J. L.; Wright, D. D.; Wigdor, H. A.; Walsh Jr., J. T. // Journal of Dental Research;Jan1996, Vol. 75 Issue 1, p599 

    An Er:YAG laser coupled with a cooling stream of water effectively removes dental hard tissues. However, before such a system can be deemed clinically viable, some safety and efficacy issues must be addressed. We compared the bonding of composite to dentin following the preparation of the...

  • OpusDuo E.  // Dental Practice Report;Dec2005, Vol. 13 Issue 10, p151 

    This article presents information on the OpusDuo E Er:YAG laser from Lumenis Ltd. Through this laser, hard-tissue can be cut rapidly and with precision. A touch-screen monitor and numerous pre-programmed procedural settings are being provided with the laser. Users can control the pulse rate per...

  • Microleakage of repaired class V silorane and nano-hybrid composite restorations after preparation with erbium:yttrium-aluminum-garnet laser and diamond bur. Yaman, Batu; Efes, Begüm; Dörter, Can; Gömeç, Yavuz; Erdilek, Dina; Yazıcıoğlu, Oktay; Yaman, Batu Can; Efes, Begüm Güray; Dörter, Can; Gömeç, Yavuz; Yazıcıoğlu, Oktay // Lasers in Medical Science;Mar2011, Vol. 26 Issue 2, p163 

    The aim of this in vitro study was to compare the microleakage of repaired class V resin composite restorations prepared either by Er:YAG laser or a diamond bur. Ninety-six intact human molar teeth were randomly distributed into eight groups. In the first four groups, class V cavities (3 × 3...

  • The Pumping Parameters for Er-doped Tellurite Glass. Sharip, N.; Daud, M. R. Sahar Y.; Tamuri, A. R. // Advanced Materials Research;2014, Issue 895, p375 

    Erbium doped tellurite glass rod of the 78.5 TeO2 - 20 ZnO - 1.5 Er2O3 where has successfully been fabricated as lasing medium and have been investigated by means of their properties needed in lasing application. The external triggering method is used to generate high peak current in several...

  • Bonding to Er-YAG-lasertreated Dentin. Ceballos, L.; Toledano, M.; Osorio, R.; Tay, F. R.; Marshall, G. W. // Journal of Dental Research;Feb2002, Vol. 81 Issue 2, p119 

    Er-YAG laser irradiation has been claimed to improve the adhesive properties of dentin. We tested the hypothesis that dentin adhesion is affected by Er-YAG laser conditioning. Superficial or deep dentin from human molars was: (a) acid-etched with 35% H3PO4; (b) irradiated with an Er-YAG laser...

  • 2.0 W diode-pumped Er:Yb:YAl3(BO3)4 laser at 1.5–1.6 μm. Chen, Y. J.; Lin, Y. F.; Gong, X. H.; Tan, Q. G.; Luo, Z. D.; Huang, Y. D. // Applied Physics Letters;12/11/2006, Vol. 89 Issue 24, p241111 

    An efficient and high output power laser has been realized for an Er:Yb:YAl3(BO3)4 crystal end pumped by a 970 nm diode laser. Under the absorbed pump power of 15.5 W, quasi-continuous-wave output power of 2.0 W at 1.5–1.6 μm has been obtained in a hemispherical cavity. The laser had...

  • Facial resurfacing with erbium:YAG laser. Samalonis, Lisa B. // Cosmetic Surgery Times;Jun2005, Vol. 8 Issue 5, p26 

    Reports on explanations by John L Burns of the Dallas Plastic Surgery Institute in Dallas, Texas on facial resurfacing with erbium:YAG laser. Discussion of results of a study comparing the carbon dioxide laser and the dual-mode long-pulsed erbium:YAG laser for ablative facial resurfacing; Less...

  • Theory and Engineering Design Aspects of a Mini Diode-Pumped Q-Switch Er: Glass Laser for Space Applications. Sankar, N. Siva; Ramalingam, A.; Raja, V. L. N. Sridhar; Laxmiprasad, A. S. // AIP Conference Proceedings;10/20/2011, Vol. 1391 Issue 1, p279 

    The invention of the laser, with its precise wavelength and beam divergence characteristics, coupled with the techniques like q-switching, mode locking to produce ultra-short pulses has been influencing the era of space technology. Space agencies worldwide are equipping satellites with laser...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics