TITLE

Laser-induced selective copper deposition on polyimide

AUTHOR(S)
Cole, H. S.; Liu, Y. S.; Rose, J. W.; Guida, R.
PUB. DATE
November 1988
SOURCE
Applied Physics Letters;11/21/1988, Vol. 53 Issue 21, p2111
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Laser irradiation of organometallic palladium compounds with an argon ion laser at 351 nm is used to selectively deposit catalytic amounts of palladium on polyimide. Subsequent immersion of the irradiated samples in an electroless copper solution results in copper deposition. Since a few monolayers of palladium are sufficient to catalyze the electroless copper process, fast writing speeds of several centimeters per second are obtained.
ACCESSION #
9828844

 

Related Articles

  • Laser-induced hybrid trap for micro-bubbles. Lü, B.L.; Li, Y.Q.; Ni, H.; Wang, Y.Z. // Applied Physics B: Lasers & Optics;2000, Vol. 71 Issue 6, p801 

    Abstract. Micro-bubbles have been stably trapped in liquid ethanol by a focused argon laser beam. Two equilibrium points where bubbles can be trapped are observed to be at the center and the rim of the laser beam. The light force is also able to push a bubble into the liquid to a position well...

  • Ar ion laser-assisted metalorganic molecular beam epitaxy of GaAs. Sugiura, H.; Iga, R.; Yamada, T.; Yamaguchi, M. // Applied Physics Letters;1/23/1989, Vol. 54 Issue 4, p335 

    Selective growth of GaAs using an Ar+ laser beam is reported. The laser irradiation during growth in the substrate temperature range 400–525 °C forms a GaAs spot of 400 μm in diameter. The spot growth rate increases up to 1.3 μm/h with laser power and does not depend on the type...

  • Laser beat mapping with a Nipkow disk. Giusfredi, G.; Hostetler, R. // Review of Scientific Instruments;Apr89, Vol. 60 Issue 4, p598 

    We describe a simple system displaying the intensity profile of specific frequency components of a pulsating light beam. This device employs a spiral pattern of small apertures on a rotating wheel (Nipkow disk), which provides a two-dimensional scanning of the beam. A phototube ac-coupled with...

  • Permanent polarization gratings in photosensitive Langmuir-Blodgett films. Cipparrone, G.; Mazzulla, A.; Palto, S. P.; Palto, S.P.; Yudin, S. G.; Yudin, S.G.; Blinov, L. M.; Blinov, L.M. // Applied Physics Letters;10/2/2000, Vol. 77 Issue 14 

    An investigation was carried out on thin permanent phase polarization gratings recorded in Langmuir-Blodgett films using two orthogonal circularly polarized Ar-ion laser beams. The films are composed of amphiphilic azo-dye molecules and manifest an extremely large value of photoinduced optical...

  • Transport in reversibly laser-modified YBa2Cu3O7-x superconducting thin films. Krchnavek, Robert R.; Chan, Siu-Wai; Rogers, C. T.; De Rosa, F.; Kelly, M. K.; Miceli, P. F.; Allen, S. J. // Journal of Applied Physics;2/15/1989, Vol. 65 Issue 4, p1802 

    Presents a study which used a focused argon ion laser beam in a controlled ambient to modify the transport properties of superconducting YBa[sub2]Cu[sub3]O[sub7] thin films. Applications of the high transition temperature; Information on the superconducting film used in the experiments;...

  • Surface relief grating formation on nano-objects. Barillé, R.; Tajalli, P.; Zielinska, S.; Ortyl, E.; Kucharski, S.; Nunzi, J. M. // Applied Physics Letters;8/3/2009, Vol. 95 Issue 5, p053102 

    We exploit the photoinduced migration effect in azopolymer thin films to induce surface relief patterning of nano-objects. Manipulation and precise control of the molecular order is achieved at the nanoscale. Interaction between a laser beam from an argon laser and the azopolymer nano-objects...

  • Local crystallization in an oxyfluoride glass doped with Er3+ ions using a continuous argon laser. González-Pérez, S.; Martín, I.; Lahoz, F.; Haro-González, P.; Herreros, J. // Applied Physics A: Materials Science & Processing;Dec2008, Vol. 93 Issue 4, p983 

    Local crystalline formation in erbium doped oxyfluoride glass has been obtained under a cw Argon laser irradiation up to 1.8 W pumping power. By exciting at 514 nm, the emission from 800 nm and 850 nm corresponding to the 4S3/2(2H11/2)→4I13/2 electronic transitions have been analyzed both...

  • Argon laser in the treatment of port wine stains. Carruth, J. A. S. // Journal of the Royal Society of Medicine;Sep1984, Vol. 77 Issue 9, p722 

    The article discusses the use of argon laser in the treatment of port wine stain. It explains how the disease is treated through argon laser beam. It cites the creation of the blanching power technique in the Southampton Laser Unit which was designed to lessen the incidence of scarring caused by...

  • Laser irradiation in Nd3+ doped strontium barium niobate glass. Haro-González, P.; Martín, I. R.; Arbelo-Jorge, E.; González-Pérez, S.; Cáceres, J. M.; Núñez, P. // Journal of Applied Physics;Jul2008, Vol. 104 Issue 1, p013112 

    A local nanocrystalline formation in a neodymium doped strontium barium niobate (SBN) glass has been obtained under argon laser irradiation. The intense emission around 880 nm, originated from the 4F3/2 (4F5/2) thermalized level when the glass structure changes to a glass ceramic structure due...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics