TITLE

Enhanced wear resistance by compressive strengthening: A novel combination of laser and ion implantation technology

AUTHOR(S)
De Beurs, H.; De Hosson, J. Th. M.
PUB. DATE
August 1988
SOURCE
Applied Physics Letters;8/22/1988, Vol. 53 Issue 8, p663
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In general, neon implantation is not very effective in reducing wear rates. However, neon implantation into laser-melted steel turns out to reduce the wear rate substantially as a result of a conversion of residual tensile stresses into compressive ones. Nitrogen implantation, on the other hand, at a high dose of 3×1017 ions/cm2 at 90 °C exhibits a deleterious effect on the wear performance. A brittle layer of ε-Fe2(C,N)1-x nitrides is formed. At a lower dose of 1×1017/cm2 or implantation of nitrogen at 150 °C, the wear rate is also reduced.
ACCESSION #
9827826

 

Related Articles

  • Melt-front velocity in laser-induced melting. Cohen, S. S.; Wyatt, P. W.; Chapman, G. H.; Canter, J. M. // Journal of Applied Physics;6/1/1990, Vol. 67 Issue 11, p6694 

    Presents information on a study which analyzed laser melting processes, particularly for semiconductor substrates. Parameters for the diode linking process; Temporal behavior of a typical laser pulsed used in the laser-diffused link application; Examination of the melt-front velocity.

  • High-intensity lasers and controlled fusion. Freeman, R. R.; Anderson, C.; Hill, J. M.; King, J.; Snavely, R.; Hatchett, S.; Key, M.; Koch, J.; MacKinnon, A.; Stephens, R.; Cowan, T. // European Physical Journal D -- Atoms, Molecules, Clusters & Opti;Sep2003, Vol. 26 Issue 1, p73 

    The use of high-intensity lasers to cause ignition in inertial confinement fusion is presented, with emphasis on current experimental programs and physical concepts that are at the forefront of the field. In particular, we highlight the issues of fast electron transport through dense materials,...

  • Solidification kinetics of pulsed laser melted silicon based on thermodynamic considerations. Galvin, G. J.; Mayer, J. W.; Peercy, P. S. // Applied Physics Letters;4/1/1985, Vol. 46 Issue 7, p644 

    The measured solidification velocities in silicon after pulsed laser melting are analyzed in terms of thermodynamic and kinetic considerations. Both interface and thermal transport limited growth regimes are observed. From the observed kinetics in the 1–6-m/s regime, the undercooling at...

  • The role of electron-phonon coupling in femtosecond laser damage of metals. Wellershoff, S.-S.; Hohlfeld, J.; Güdde, J.; Matthias, E. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS99 

    Abstract. Femtosecond laser pulses were applied to study the energy deposition depth and transfer to the lattice for Au, Ni, and Mo films of varying thickness. The onset of melting, defined here as damage threshold, was detected by measuring changes in the scattering, reflection and transmission...

  • Molecular fusion within fullerene clusters induced by femtosecond laser excitation. Hedén, M.; Kjellberg, M.; Bulgakov, A. V.; Hansen, K.; Campbell, E. E.B. // European Physical Journal D -- Atoms, Molecules, Clusters & Opti;Jul2007, Vol. 43 Issue 1-3, p255 

    Molecular fusion is induced in clusters of fullerene molecules on excitation with fs laser pulses. The dependence of the mass distributions of the fused products on the initial cluster distribution are studied and results for (C60)N and (C70)N clusters are compared. The fused products decay by...

  • Analytical criterion for shock ignition of fusion reaction in hot spot. Ribeyre, X.; Tikhonchuk, V. T.; Breil, J.; Lafon, M.; Vallet, A.; Le Bel, E. // EPJ Web of Conferences;2013, Issue 59, p1 

    Shock ignition of DT capsules involves two major steps. First, the fuel is assembled by means of a low velocity conventional implosion. At stagnation, the central core has a temperature lower than the one needed for ignition. Then a second, strong spherical converging shock, launched from a high...

  • Two-dimensional model for material damage due to melting and vaporization during laser irradiation. Kar, A.; Mazumder, J. // Journal of Applied Physics;10/15/1990, Vol. 68 Issue 8, p3884 

    Presents a study which proposed a two-dimensional model for material damage due to melting and vaporization during laser irradiation. Mathematical model; Results and discussion; Conclusion.

  • Cluster bombs. Jeffrey, Winters // Discover;Jan98, Vol. 19 Issue 1, p52 

    Reports on the success of a group of physicists at Imperial College in London, England, in doing fusion research with a small laser. Placing of xenon atoms in a vacuum chamber; Temperature of particles hit by compressed beam from the xenon atoms.

  • Effect of Process Parameters on the Melting Ratio in Overlap Pulsed Laser Welding. Sabbaghzadeh, J.; Hamedi, M.J.; Ghaini, F.; Torkamany, M.J. // Metallurgical & Materials Transactions. Part B;Apr2008, Vol. 39 Issue 2, p340 

    A study of melting ratio in overlap pulsed laser welding has been done on St14 carbon steel sheet to investigate the effect of process parameters. Pulse duration, pulse energy, pulse frequency, and travel speed were varied in the experimental procedure. The results of the melting ratio have been...

  • Enhanced spatial localization of collective scattering based on spatially varying electric fields (abstract). Rettig, C. L.; Doyle, E. J.; Luhmann, N. C.; Peebles, W. A.; Philipona, R.; Burrell, K. H.; Groebner, R. J. // Review of Scientific Instruments;Oct92, Vol. 63 Issue 10, p4636 

    Many of the diagnostics that work on present magnetic fusion experiments will fail badly in the high radiation field of the burning fusion devices which are under conceptual design now. Two quantities of particular interest are the poloidal magnetic field profile versus minor radius, and radial...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics