TITLE

Superconducting thin films of Bi-Sr-Ca-Cu-O obtained by laser ablation processing

AUTHOR(S)
Kim, B. F.; Bohandy, J.; Phillips, T. E.; Green, W. J.; Agostinelli, E.; Adrian, F. J.; Moorjani, K.; Swartzendruber, L. J.; Shull, R. D.; Bennett, L. H.; Wallace, J. S.
PUB. DATE
July 1988
SOURCE
Applied Physics Letters;7/25/1988, Vol. 53 Issue 4, p321
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Thin films of Bi-Sr-Ca-Cu-O, deposited on (100) cubic zirconia by laser ablation from a bulk superconducting target of nominal composition BiSrCaCu2 Ox , have been investigated by dc resistance and magnetically modulated microwave absorption measurements. The latter technique reveals important features regarding the phase purity of superconducting samples that are masked in the dc resistance measurements. The superconducting behavior of the films, as a function of the substrate temperature during deposition and the post-deposition annealing conditions, is discussed.
ACCESSION #
9827472

 

Related Articles

  • Superconducting thin films of Bi-Ca-Sr-Cu-O by sequential evaporation. Mogro-Campero, A.; Turner, L. G.; Garbauskas, M. F.; Green, R. W. // Applied Physics Letters;7/25/1988, Vol. 53 Issue 4, p327 

    Thin films of the high-temperature superconductor Bi-Ca-Sr-Cu-O have been produced by sequential evaporation and furnace annealing. Zero-resistance transition temperatures are near 70 K, with an onset temperature of about 85 K, which corresponds to transition temperatures measured on bulk...

  • Cu valence and the formation of high Tc superconductor oxides studied by x-ray photoemission spectroscopy on 200 Ã… Bi-Sr-Ca-Cu oxide thin films. Yeh, J.-J.; DiCenzo, S. B.; Hartford, E. H.; Hong, M.; Felder, R. J. // Applied Physics Letters;1/23/1989, Vol. 54 Issue 4, p377 

    We have used x-ray photoemission spectroscopy to study the core level spectra of 200 Å Bi-Sr-Ca-Cu oxide thin films, in the hope that the importance of the surface sensitivity of photoemission is minimized for these samples, whose thickness is only 6–7 unit cells. The samples were...

  • Composition dependence of high Tc phase formation in Pb-doped Bi-Sr-Ca-Cu-O thin films. Tanaka, Atsushi; Kamehara, Nobuo; Niwa, Koichi // Applied Physics Letters;9/18/1989, Vol. 55 Issue 12, p1252 

    We studied the composition dependence of high Tc phase Bi2Sr2Ca2Cu3Ox formation in Pb-doped Bi system thin films. Films were prepared by rf magnetron sputtering using three targets and post-annealed to synthesize superconducting films. In addition to a Bi-Sr-Ca-Cu-O target, PbO and CuO targets...

  • Deposition of superconducting YBaCuO thin films by pseudospark ablation. Höbel, M.; Geerk, J.; Linker, G.; Schultheiss, C. // Applied Physics Letters;3/5/1990, Vol. 56 Issue 10, p973 

    Thin YBaCuO films have been deposited on ZrO2(Y) and SrTiO3 substrates by a novel ablation method, using a pulsed intense electron beam generated by a pseudospark source. Films with zero resistance around 85 K were grown at substrate temperatures of 820 °C with high reproducibility. X-ray...

  • Superconducting Properties of BSCCO (2223) Ultrathin Films. Navarrete, L.; Mariño, A.; Sánchez, H. // Surface Review & Letters;Oct-Dec2002, Vol. 9 Issue 5/6, p1757 

    Ultrathin films of (Bi-Pb)-Sr-Ca-Cu-O (2223) were produced by ex situ RF magnetron sputtering on MgO (100) substrates. Films with different thermal treatments and thickness varying between 30 nm and 300 nm were obtained and studied systematically. A structural characterization of these samples...

  • In situ deposition of superconducting Bi-Pb-Sr-Ca-Cu-O thin films on MgO(100) substrates by rf magnetron sputtering and laser ablation. Moodera, J. S.; Rao, A. M.; Kussmaul, A.; Tedrow, P. M. // Applied Physics Letters;12/3/1990, Vol. 57 Issue 23, p2498 

    Superconducting thin films of Bi-Pb-Sr-Ca-Cu-O (BPSCCO) have been prepared in situ by magnetron sputtering and laser ablation onto heated MgO (100) substrates. Post-deposition annealing at higher temperatures was not required to obtain superconducting BPSCCO films, and a narrow temperature...

  • Preparation of oriented Bi-Ca-Sr-Cu-O thin films using pulsed laser deposition. Fork, D. K.; Boyce, J. B.; Ponce, F. A.; Johnson, R. I.; Anderson, G. B.; Connell, G. A. N.; Eom, C. B.; Geballe, T. H. // Applied Physics Letters;7/25/1988, Vol. 53 Issue 4, p337 

    Oriented c-axis thin films of Bi-Ca-Sr-Cu-O on [100] SrTiO3 substrates have been fabricated using the pulsed excimer laser evaporation technique. Deposition at room temperature in 1 mTorr oxygen followed by an 875 °C anneal in oxygen yields superconducting films with zero resistance at 80 K...

  • Superconducting Bi-Ca-Sr-Cu oxide thin films by spray pyrolysis of metal acetates. Vaslow, Dale F.; Dieckmann, Gunter H.; Elli, David Dawson; Ellis, Arthur B.; Holmes, D. Scott; Lefkow, Anthony; MacGregor, Mark; Nordman, James E.; Petras, Michael F.; Yang, Yifeng // Applied Physics Letters;7/25/1988, Vol. 53 Issue 4, p324 

    Superconducting Bi-Ca-Sr-Cu oxide thin films have been prepared on ZrO2-coated silicon (111) wafers by spray pyrolysis of metal acetate precursors followed by rapid annealing to 850 °C in air. Resistivity measurements indicate a broad superconducting transition with Tc onset near 90 K and...

  • Pb-doped Bi-Sr-Ca-Cu-O thin films. Tanaka, Atsushi; Machi, Takato; Kamehara, Nobuo; Niwa, Koichi // Applied Physics Letters;4/3/1989, Vol. 54 Issue 14, p1362 

    We prepared Pb-doped Bi-Sr-Ca-Cu-O thin films by rf-magnetron sputtering with multiple targets. A Bi2O3 target compensated for lack of Bi and a PbO target was used to dope Pb into films in sufficient quantity. In thin films, Pb evaporates easily during sintering. We prepared heavily Pb-doped...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics