TITLE

Pt-coated substrate effect on oxide superconductive films in low-temperature processing

AUTHOR(S)
Hatta, S.; Higashino, H.; Hirochi, K.; Adachi, H.; Wasa, K.
PUB. DATE
July 1988
SOURCE
Applied Physics Letters;7/11/1988, Vol. 53 Issue 2, p148
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Excellent films of a high Tc oxide superconductor were easily produced on Pt-coated substrates at 650 °C. The film superconductivity was significantly improved by the Pt buffer layer. The c axis of the superconductive film was preferentially oriented perpendicularly to the plane with the crystalline oriented Pt coating layer.
ACCESSION #
9827356

 

Related Articles

  • High-temperature processing of cuprate oxide superconductors. Wu, M. K.; Ashburn, J. R.; Higgins, C. A.; Fellows, C. W.; Loo, B. H.; Burns, D. H.; Ibrahim, A.; Rolin, T. D.; Peters, P. N.; Sisk, R. C.; Huang Development Division, C. Y. // Applied Physics Letters;5/30/1988, Vol. 52 Issue 22, p1915 

    Superconducting Y1Ba2Cu3O7 (‘‘123’’) films were fabricated on the Y2BaCuO5 (‘‘211’’) phase substrate. The superconducting characteristics of these films, in terms of superconducting transition temperature (Tc) and width, are better than those...

  • Highly oriented superconducting thin films derived from the sol-gel process. Kramer, S. A.; Kordas, G.; McMillan, J.; Hilton, G. C.; Van Harligen, D. J. // Applied Physics Letters;7/11/1988, Vol. 53 Issue 2, p156 

    Highly oriented YBa2Cu3O6+x superconducting thin films have been developed via sol-gel processing. Film deposition involved spin coating a ‘‘partially hydrolyzed’’ metal-alkoxide stock solution onto single-crystal [100] SrTiO3 substrates. Although scanning electron...

  • Growth of epitaxial YbBa2Cu3O7 superconductor by liquid-gas-solidification processing. Chen, H. S.; Liou, S. H.; Kortan, A. R.; Kimerling, L. C. // Applied Physics Letters;8/22/1988, Vol. 53 Issue 8, p705 

    Superconductive films of YbBa2Cu3O7 have been epitaxially grown on SrTiO3 substrate by a novel liquid-gas-solidification process. A layer of metallic YbBa2Cu3 melt was coated on the substrate and in situ oxidized. The oxide films grown on the SrTiO3 (100) substrate are epitaxially oriented in...

  • A Novel Buffer Layer for Growing Ultrathin Films of YBa[sub 2]Cu[sub 3]O[sub y] on YSZ Substrates. Gao, J.; Tang, W. H.; Chui, T. C. // International Journal of Modern Physics B: Condensed Matter Phys;12/20/99, Vol. 13 Issue 29/31, p3660 

    A new buffer material Nd[sub 2]CuO[sub 4] has been used to improve the initial epitaxy of YBa[sub 2]Cu[sub 3]O[sub y] on yttrium stabilized ZrO[sub 2]. By using Nd[sub 2]CuO[sub 4] as a buffer layer, the epitaxy and crystallinity of the grown YBa[sub 2]Cu[sub 3]O[sub y] have been significantly...

  • The Diffusion of The Vortices in High T[sub c] Thin Film Microbridges: Model and Results. Bernstein, P.; Pannetier, M.; Lecoeur, Ph.; Doan, T. D.; Hamet, J. F. // International Journal of Modern Physics B: Condensed Matter Phys;12/20/99, Vol. 13 Issue 29/31, p3626 

    We have previously proposed a model for the flux creep regime of the vortices in superconducting thin film microbridges in which a bias current flows. In the first part of the paper this model is summarized and we show how physical quantities which are relevant to estimate the importance of...

  • Superconducting properties of MgB[sub 2] thin films prepared on flexible plastic substrates. Kúsˇ, Peter; Plecenik, Andrej; Satrapinsky, Leonid; Xu, Ying; Sobolewski, Roman // Applied Physics Letters;9/16/2002, Vol. 81 Issue 12, p2199 

    Superconducting MgB[sub 2] thin films were prepared on 50-µm-thick, flexible polyamide Kapton-E foils by vacuum co-deposition of Mg and B precursors with nominal thickness of about 100 nm and a subsequent ex situ rapid annealing process in an Ar or vacuum atmosphere. In the optimal annealing...

  • In situ growth of epitaxial YBa[sub 2]Cu[sub 3]O[sub 7] thin films by on-axis unbalanced direct.... Savvides, N.; Katsaros, A. // Applied Physics Letters;2/1/1993, Vol. 62 Issue 5, p528 

    Describes the growth of epitaxial YBa[sub 2]Cu[sub 3]O[sub 7] superconducting thin films by on-axis direct-current magnetron sputtering. Use of an unbalance magnetic field configuration; Dependence of film growth and properties on sputtering pressure and substrate temperature; Advantages of the...

  • Superconducting and epitaxial (TI,Pb)Sr[sub 2]Ca[sub 1-x]Y[sub x]Cu[sub 2]O[sub 7] thin films.... Myers, K.E.; Face, D.W.; Kountz, D.J.; Nestlerode, J.P. // Applied Physics Letters;7/25/1994, Vol. 65 Issue 4, p490 

    Presents a method for fabricating (Tl,Pb)Sr[sub 2]Ca[sub 1-x]Y[sub x]Cu[sub 2]O[sub 7] thin films. Use of magnetron sputtering; Orientation of the films on substrates; In situ heat treatment of the materials influencing the superconducting temperatures of the films.

  • Response of superconducting Y–Ba–Cu–O films to millimeter wave radiation. Repsˇas, K.; Laurinavicˇius, A.; Vasˇkevicˇius, A. R.; Anisimovas, F. // Applied Physics Letters;12/31/2001, Vol. 79 Issue 27, p4544 

    The origin of temperature and radiation power response dependencies to millimeter wave radiation is analyzed for Y–Ba–Cu–O thin films. These dependencies were both experimentally measured and described by an empirical formula. The results which were obtained indicate that...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics