TITLE

Preparation of high Tc and Jc films of Ba2YCu3O7 using laser evaporation of a composite target containing BaF2

AUTHOR(S)
DeSantolo, A. M.; Mandich, M. L.; Sunshine, S.; Davidson, B. A.; Fleming, R. M.; Marsh, P.; Kometani, T. Y.
PUB. DATE
June 1988
SOURCE
Applied Physics Letters;6/6/1988, Vol. 52 Issue 23, p1995
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
High Tc and Jc superconducting films of Ba2YCu3O7 are prepared on SrTiO3 <100> substrates using pulsed excimer laser evaporation of a composite target containing BaF2, Y2O3, and CuO, followed by annealing in wet oxygen. High transition temperatures (R=0 from 89.5 to 91 K) and high critical current densities (Jc≥7×105 A cm-2) are obtained. The electrical transport properties of these films are significantly better than films previously grown via laser ablation of Ba-Y-Cu-O targets.
ACCESSION #
9827020

 

Related Articles

  • Microstructural and compositional variations in laser-deposited superconducting thin films. Singh, R. K.; Biunno, N.; Narayan, J. // Applied Physics Letters;9/12/1988, Vol. 53 Issue 11, p1013 

    We have investigated thickness and composition variations in laser-deposited superconducting thin films and their effects on the microstructure development after subsequent annealing to recover the superconducting properties. Superconducting thin films were deposited on magnesium oxide...

  • Micropatterning of high Tc films with an excimer laser. Mannhart, J.; Scheuermann, M.; Tsuei, C. C.; Oprysko, M. M.; Chi, C. C.; Umbach, C. P.; Koch, R. H.; Miller, C. // Applied Physics Letters;4/11/1988, Vol. 52 Issue 15, p1271 

    Micron-wide lines of high Tc Y-Ba-Cu-O have been successfully patterned by ablating the films with a pulsed excimer laser. The high Tc films are mounted onto a computer-controlled stepping stage and irradiated with a demagnified image of a variable-size rectangular aperture. This technique has...

  • Selective area laser photodeposition of transparent conductive SnO2 films. Kunz, R. R.; Rothschild, M.; Ehrlich, D. J. // Applied Physics Letters;4/24/1989, Vol. 54 Issue 17, p1631 

    The deposition of SnO2 films has been demonstrated using an ArF (193 nm) excimer laser to drive the photochemical reactions of mixed SnCl4 and N2 O vapors. Without any annealing, films 100 nm thick grown on room-temperature substrates have resistivities as low as 0.04 Ω cm. The optical band...

  • Multilayer YBa2Cu3Ox-SrTiO3-YBa2Cu3Ox films for insulating crossovers. Kingston, John J.; Wellstood, Frederick C.; Lerch, Philippe; Miklich, Andrew H.; Clarke, John // Applied Physics Letters;1/8/1990, Vol. 56 Issue 2, p189 

    We describe our procedure for fabricating YBa2Cu3Ox-SrTiO3-YBa2Cu3Ox thin-film trilayer structures. Each film is grown in situ by excimer laser deposition onto a heated (100)MgO substrate. The geometrical configuration of each layer is defined by a metal mask; the vacuum chamber is opened...

  • Laser synthesis of new materials. Song, W. D.; Hong, M. H.; Osipowicz, T.; Dai, D. Y.; Pang, S. I.; Peng, Y. Z.; Chong, J. F.; An, C. W.; Liew, Y. F.; Chong, T. C. // Applied Physics A: Materials Science & Processing;2004, Vol. 79 Issue 4-6, p1349 

    The dual-beam laser ablation of different targets for synthesizing new materials within the overlapping plasma area has been investigated. This method is termed ‘laser synthesis of new materials’ and it is flexible in tuning the composition of the new materials by varying the...

  • Controlling crystal quality and orientation of pulsed-laser-deposited BaTiO[sub 3] thin films by the kinetic energy of the film-forming particles. Gottmann, J.; Kreutz, E.W. // Applied Physics A: Materials Science & Processing;2000, Vol. 70 Issue 3, p275 

    The deposition of BaTiO[sub 3] thin films by pulsed excimer laser radiation (248 nm) on Pt/Ti/Si(111) and Pt/Ti/Si(100) substrates is investigated as a function of the processing variables laser fluence, processing gas pressure, and target-to-substrate distance under conditions of temporal...

  • Excellent thermal stability of superconducting properties in YBa[sub 2]Cu[sub 3]O[sub 7] films.... Singh, Rajiv K.; Bhattacharya, D.; Harkness, S.; Narayan, J.; Diwari, P.; Jahncke, Catherine; Sparks, R.; Paesler, M. // Applied Physics Letters;9/9/1991, Vol. 59 Issue 11, p1380 

    Investigates the microstructure and superconducting properties of YBa[sub 2]Cu[sub 3]O[sub 7] films irradiated by pulsed excimer lasers. Deposition of the thin films; Critical current densities; Thermal stability.

  • Optical emission from the laser-induced plasma during excimer laser etching of diamondlike.... Seth, Jayshree; Padiyath, R. // Applied Physics Letters;7/12/1993, Vol. 63 Issue 2, p126 

    Examines the optical emission from laser-induced plasma plume during KrF excimer laser etching of diamondlike carbon films. Dominance of C[sub 2] Swan bands in visible and ultraviolet wavelength regions; Observation of high emission intensities during low-density film etching; Calculation for...

  • Erratum: ‘‘Epitaxial growth of RbTiOPO4 films on KTiOPO4 substrates by excimer laser ablation technique’’ [J. Appl. Phys. 76, 8215 (1994)]. Liu, Z. G.; Liu, J. M.; Ming, N. B.; Wang, J. Y.; Shi, L. P.; Liu, Y. G.; Jiang, M. H. // Journal of Applied Physics;5/15/1995, Vol. 77 Issue 10, p5487 

    Presents corrections for the study 'Epitaxial Growth of RbTiOPO4 Films on KTiOPO4 Substrates by Excimer Laser Ablation Technique,' by Z.G. Liu, J.M. Liu, N.B. Ming, J.Y. Wang, L.P. Shi, Y.G. Liu and M.H. Jiang.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics