TITLE

Texture formation and enhanced critical currents in YBa2Cu3O7

AUTHOR(S)
Malik, M. K.; Nair, V. D.; Biswas, A. R.; Raghavan, R. V.; Chaddah, P.; Mishra, P. K.; Kumar, G. Ravi; Dasannacharya, B. A.
PUB. DATE
May 1988
SOURCE
Applied Physics Letters;5/2/1988, Vol. 52 Issue 18, p1525
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We report an increase of a factor up to 5 in JC on mixing varying amounts of Ag2O with YBa2Cu3O7. The increase correlates with an increase in texture as seen by x-ray diffraction intensities. Microstructure indicates the formation of platelets with c axis normal to the platelets.
ACCESSION #
9826668

 

Related Articles

  • Magnetic hardening of Pr-Co-B sintered magnets. Christodoulou, C. N.; Wallace, W. E.; Massalski, T. B. // Journal of Applied Physics;9/15/1989, Vol. 66 Issue 6, p2749 

    Discusses a successful fabrication via sintering of a Pr-Co-B sintered magnet. Microstructure of the magnets; Phases that are present in the magnet; Uses of thermomagnetic analysis and x-ray diffraction techniques to identify the phases present in the magnet.

  • SINTERING RESPONSE & MICROSTRUCTURAL EVOLUTION OF AN Al-Cu-Mg-Si PREMIX. Mart�n, Jos� M.; Castro, Francisco // International Journal of Powder Metallurgy;Nov/Dec2007, Vol. 43 Issue 6, p59 

    The sintering behavior of a powder premix (Al-4.4 w/o Cu-0.5 w/o Mg-0.7 w/o Si) has been studied. Reactions occurring during liquid-phase sintering of this alloy have been identified by means of differential scanning calorimetry (DSC), dilatometry, sintering experiments, and microstructural...

  • The Transition from Paramagnetic to Ferromagnetic States as Influenced by Evolving Microstructure of NiZnFeO. Ismail, Ismayadi; Hashim, Mansor; Matori, Khamirul; Alias, Rosidah; Hassan, Jumiah // Journal of Superconductivity & Novel Magnetism;Jan2012, Vol. 25 Issue 1, p71 

    In this paper the effect of sintering temperature on NiZnFeO is examined closely. The evolution of toward magnetically ordered materials was to be tracked with the parallel evolving microstructure subjected to sintering temperatures in an ascending order. The starting powder of NiZnFeO was...

  • Ti3SiC2/TiC composites prepared by PDS. Konoplyuk, S.; Abe, T.; Uchimoto, T.; Takagi, T. // Journal of Materials Science;Jul2005, Vol. 40 Issue 13, p3409 

    Synthesis of composite materials with improved mechanical properties is considered. Pulse discharge sintering (PDS) technique was utilized for consolidation and synthesis of double phase Ti3SiC2/TiC composites from the initial powders TiH2/SiC/TiC. Scanning electron microscopy with...

  • Relationship among the phase equilibria, microstructures, and dielectric properties of CaCu3Ti4O12 ceramics via different sintering time. Kwon, Seunghwa; Cann, David P. // Journal of Materials Science;Aug2009, Vol. 44 Issue 15, p4117 

    The structure–property relationship of the CaCu3Ti4O12 ceramics processed via conventional solid-state method was studied in terms of the different processing conditions. X-ray diffraction patterns of the tenorite CuO and cuprite Cu2O secondary phases found on the unpolished and polished...

  • Effects of sintering condition on phase formation, microstructure and dielectric properties of lead titanate ceramics. Wongmaneerung, R.; Yimnirun, R.; Ananta, S. // Applied Physics A: Materials Science & Processing;Jan2006, Vol. 86 Issue 2, p249 

    Lead titanate ceramics have been prepared by two different processing methods: conventional (or single-stage) and two-stage sintering. Effects of designed sintering conditions on phase formation, densification, microstructure and dielectric properties of the ceramics were characterized via X-ray...

  • Sintering and electrical properties of CeSmO film prepared by spray pyrolysis and tape casting. Xibao Li; Gangqin Shao; Xiaohua Yu; Jian Wang; Hongxing Gu // Journal of Materials Science: Materials in Electronics;Feb2011, Vol. 22 Issue 2, p189 

    CeSmO (SDC) powder was synthesized by spray pyrolysis at 650 °C. XRD results showed that phase-pure SDC powder with an average crystallite size of 11 nm was synthesized. SDC electrolyte film was prepared by tape casting and sintered at different temperatures of 1,300, 1,400 and 1,500 °C...

  • Dislocation Configurations in Nanocrystalline FeMo Sintered Components. Scardi, Paolo; D'incau, Mirco; Leoni, Matteo; Fais, Alessandro // Metallurgical & Materials Transactions. Part A;May2010, Vol. 41 Issue 5, p1196 

    Net-shape compaction of a nanocrystalline ball-milled commercial Fe-1.5 wt pct Mo powder was done via spark plasma sintering (SPS) and capacitor discharge sintering (CDS). A detailed microstructure analysis, performed by X-ray diffraction–whole powder pattern modeling (XRD-WPPM), shows...

  • Synthesis and Characterization of TiSiC Particulate-Reinforced Novel Zn Matrix Composites. Gupta, S.; Habib, M.; Dunnigan, R.; Kaabouch, N.; Ghosh, S. // Journal of Materials Engineering & Performance;Oct2015, Vol. 24 Issue 10, p4071 

    In this paper, we report the synthesis and characterization of novel TiSiC-reinforced Zn matrix composites. All the composites were hot pressed at 500 °C for 5 min at a uniaxial pressure of ~150 MPa. Microstructure analysis by scanning electron microscopy and phase analysis by x-ray...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics