TITLE

Superpolished single-crystal molybdenum mirror for x-ray ultraviolet to x-ray radiation

AUTHOR(S)
Yoshida, K.; Takeuchi, K.; Kato, Y.; Fujiwara, E.; Yamashita, K.; Kurosawa, K.; Sasaki, W.; Okamoto, H.
PUB. DATE
April 1988
SOURCE
Applied Physics Letters;4/4/1988, Vol. 52 Issue 14, p1111
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
High-quality single-crystal molybdenum (Mo) fabricated by a secondary recrystallization method has been polished with a new polishing technique. The superpolished surface of the Mo single crystal has a surface roughness of 3.5 Å rms. This superpolished single-crystal Mo has been used for a high-power electron beam pumped argon excimer laser (λ=126 nm) as a cavity mirror. Peak output power of more than 3 MW has been achieved without any damage to the mirror surface.
ACCESSION #
9826400

 

Related Articles

  • Textural Evolution During Dynamic Recovery and Static Recrystallization of Molybdenum. Primig, Sophie; Leitner, Harald; Knabl, Wolfram; Lorich, Alexander; Clemens, Helmut; Stickler, Roland // Metallurgical & Materials Transactions. Part A;Dec2012, Vol. 43 Issue 12, p4794 

    In the current investigation, sintered molybdenum specimens with random textures were deformed in compression in a deformation dilatometer over a range of temperatures from 0.44 T [K] to 0.61 T [K] and true strains between φ = 0.3 and 0.92. Subsequent annealing treatments were carried out in...

  • Static Recrystallization of Molybdenum After Deformation Below 0.5* T (K). Primig, Sophie; Leitner, Harald; Knabl, Wolfram; Lorich, Alexander; Stickler, Roland // Metallurgical & Materials Transactions. Part A;Dec2012, Vol. 43 Issue 12, p4806 

    Currently, the main production route of molybdenum parts is via thermomechanical processing of sintered starting material. This is often carried out in the upper warm-deformation temperature range (<0.5* T [K]) with intermediate static recrystallization annealings. During warm deformation by...

  • Recrystallization of a Polygonized Molybdenum Crystal: Relation Between Dislocation Rearrangements and Formation of a New Orientation. Kobyakov, V. P. // Metal Science & Heat Treatment;Nov/Dec2002, Vol. 44 Issue 11/12, p499 

    The mechanism of recrystallization is considered from a new standpoint using the results of a study of specially prepared single-crystal molybdenum specimens and with allowance for the relation between rearrangements of dislocations in the crystal and the appearance of a new orientation of...

  • The Effect of Annealing on the Structure and Mechanical Properties of Mo - 47.5 Wt. % Re Alloy Sheet. Shields, John A. // AIP Conference Proceedings;2005, Vol. 746 Issue 1, p835 

    The temperature dependence of microstructure, hardness, and room-temperature tensile properties of Mo - 47.5 wt. % Re sheet were measured for sheet thicknesses between 0.51 mm and 3.05 mm. Recrystallization occurred between 1200 C and 1300 C for all thicknesses, even though appreciable drops in...

  • Laboratory testing for sulfide flotation process development. Thompson, P. // Minerals & Metallurgical Processing;Nov2016, Vol. 33 Issue 4, p200 

    A carefully planned laboratory test program is the foundation for the successful development of a sulfide flotation process. In this paper, the development of a copper-molybdenum flotation process is described. However, the concepts discussed can be applied to most sulfide flotation systems and...

  • Surface impurity diffusion-induced recrystallization of ultrafine-grained molybdenum. Grabovetskaya, G. P.; Mishin, I. P.; Kolobov, Yu. R.; Ratochka, I. V.; Zabudchenko, O. V. // Russian Physics Journal;May2007, Vol. 50 Issue 5, p451 

    Methods of scanning and transmission electron microscopy are used to perform a comparative analysis of the structur evolution of ultrafine-grained molybdenum subjected to nickel-free annealing and to diffusion annealing accompanied by nickel penetration from the surface into the bulk of Mo(Ni)...

  • Single-phase model of recrystallization of molybdenum activated by diffusion of nickel impurities. Savotchenko, S. E.; Ivanov, M. B.; Yurova, O. V. // Russian Physics Journal;Nov2007, Vol. 50 Issue 11, p1118 

    A new model of the activated recrystallization of molybdenum under the diffusion action of a nickel coating is proposed. In the context of this model, dependences of the thickness of the recrystallized layer and of the velocity of motion of the recrystallization front on the annealing time have...

  • Molybdenum-Nitride Precipitation in Recrystallized and Cold-Rolled Fe-1 at. pct Mo Alloy. Selg, H.; Bischoff, E.; Meka, S.; Schacherl, R.; Waldenmaier, T.; Mittemeijer, E. // Metallurgical & Materials Transactions. Part A;Sep2013, Vol. 44 Issue 9, p4059 

    Nitriding of recrystallized and cold-rolled Fe-1 at. pct Mo alloy at 853 K (580 °C) in a NH/H gas mixture leads to the formation of cubic nanometer-sized MoN-type precipitate platelets. These platelets obey a Baker-Nutting orientation relationship with the ferrite matrix. After prolonged...

  • Phase transition behaviors of Mo- and nitrogen-doped Ge2Sb2Te5 thin films investigated by in situ electrical measurements. Huang, Yu-Jen; Chen, Yen-Chou; Hsieh, Tsung-Eong // Journal of Applied Physics;Aug2009, Vol. 106 Issue 3, p034916 

    Phase-change behaviors of Ge2Sb2Te5 (GST) thin films doped with molybdenum (Mo) or nitrogen (N) were investigated by utilizing in situ electrical property measurement, x-ray diffraction (XRD), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy. It was found that the Mo...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics