TITLE

Structure and superconducting properties of Y1Ba2Cu3O7-δ films prepared by transversely excited atmospheric pressure CO2 pulsed laser evaporation

AUTHOR(S)
Miura, S.; Yoshitake, T.; Satoh, T.; Miyasaka, Y.; Shohata, N.
PUB. DATE
March 1988
SOURCE
Applied Physics Letters;3/21/1988, Vol. 52 Issue 12, p1008
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Superconducting Y1Ba2Cu3O7-δ films were prepared by TEA-CO2 pulsed laser evaporation. On SrTiO3(100) the a axis was oriented perpendicular to the substrate surface, while the <110> axis was oriented perpendicular to the substrate surface on SrTiO3(110). Sharp resistive superconducting transitions with zero resistance at 86 K on SrTiO3(110) and at 83 K on SrTiO3(100) were observed.
ACCESSION #
9826286

 

Related Articles

  • Spectroscopic and ion probe measurements of KrF laser ablated Y-Ba-Cu-O bulk samples. Dyer, P. E.; Greenough, R. D.; Issa, A.; Key, P. H. // Applied Physics Letters;8/8/1988, Vol. 53 Issue 6, p534 

    The KrF laser ablation of Y-Ba-Cu-O bulk samples has been studied using visible UV spectroscopy and ion probes. Principal luminescent species, expansion velocities, and the extent of ionization in the ablation plume have been determined in this way, providing information on the interaction of...

  • Growth of YBa2Cu3O7 thin films on MgO: The effect of substrate preparation. Moeckly, B. H.; Russek, S. E.; Lathrop, D. K.; Buhrman, R. A.; Li, Jian; Mayer, J. W. // Applied Physics Letters;10/15/1990, Vol. 57 Issue 16, p1687 

    We discuss the results of a study of the effect of substrate preparation on the microstructure and superconductive properties of YBa2Cu3O7 thin films formed by laser ablation on (001) MgO substrates. Thermal annealing of the substrates is found to be highly effective in producing at fairly low...

  • Synthesis of superconducting Pb-doped HgBa[sub 2]CaCu[sub 2]O[sub y] films by laser ablation and.... Higuma, Hiroko; Miyashita, Shoji // Applied Physics Letters;8/8/1994, Vol. 65 Issue 6, p743 

    Investigates the synthesis of lead-doped mercury-based superconductor films by laser ablation and post-annealing. Description of the as-deposited film; Estimation of the superconducting transition temperature; X-ray diffraction pattern of the film; Anisotropy in temperature dependence of the...

  • Estimation of plasma absorption effects during pulsed laser ablation of high-critical-temperature superconductors. Singh, Rajiv K.; Viatella, John // Journal of Applied Physics;1/15/1994, Vol. 75 Issue 2, p1204 

    Provides information on a study that proposed a method to estimate the plasma absorption during laser ablation or etching of thin films or superconductors. Information on several equations; Calculation of the ablation depths; Potential application of the simulated absorption coefficient parameter.

  • Far infrared video detection and difference frequency mixing with tilted c-axis epitaxial YBa[sub2]Cu[sub3]O[sub7-delta] thin films. Huber, W.M.; Berr, M.; Kalbeck, A.; Prettl, W.; Huggard, P.G. // Applied Physics Letters;6/3/1996, Vol. 68 Issue 23, p3338 

    Examines the photoresponse sensitivity of epitaxial YBa[sub 2]Cu[sub 3] O[sub 7-delta] thin films to far infrared laser radiation. Lack of photoresponse in c-axis normal films; Frequency mixing of two laser modes; Origin of the mixing and video detection.

  • Preparation of high Tc and Jc films of Ba2YCu3O7 using laser evaporation of a composite target containing BaF2. DeSantolo, A. M.; Mandich, M. L.; Sunshine, S.; Davidson, B. A.; Fleming, R. M.; Marsh, P.; Kometani, T. Y. // Applied Physics Letters;6/6/1988, Vol. 52 Issue 23, p1995 

    High Tc and Jc superconducting films of Ba2YCu3O7 are prepared on SrTiO3 <100> substrates using pulsed excimer laser evaporation of a composite target containing BaF2, Y2O3, and CuO, followed by annealing in wet oxygen. High transition temperatures (R=0 from 89.5 to 91 K) and high critical...

  • Superconducting Mg–B films by pulsed-laser deposition in an in situ two-step process using multicomponent targets. Blank, Dave H. A.; Hilgenkamp, Hans; Brinkman, Alexander; Mijatovic, Dragana; Rijnders, Guus; Rogalla, Horst // Applied Physics Letters;7/16/2001, Vol. 79 Issue 3 

    Superconducting thin films have been prepared in an in situ two-step process, using the Mg–B plasma generated by pulsed-laser ablation. The target was composed of a mixture of Mg and MgB[sub 2] powders to compensate for the volatility of Mg and, therefore, to ensure a high Mg content in...

  • Pulsed laser etching of high Tc superconducting films. Inam, Arun; Wu, X. D.; Venkatesan, T.; Ogale, S. B.; Chang, C. C.; Dijkkamp, D. // Applied Physics Letters;10/5/1987, Vol. 51 Issue 14, p1112 

    Etching of Y-Ba-Cu-O superconducting thin films has been accomplished using a pulsed excimer laser (248 nm, 30 ns). Etch depth as a function of the number of laser pulses was linear over a wide range of incident laser energy densities. An etch threshold energy density of 0.11 J/cm2 was observed...

  • Recovery of original superconducting properties in ion-irradiated Y1Ba2Cu3O7-x thin films. Vadlamannati, S.; England, P.; Stoffel, N. G.; Ramesh, R.; Ravi, T. S.; Hwang, D. M.; Findikoglu, A.; Li, Q.; Venkatesan, T.; McLean, W. L. // Applied Physics Letters;11/19/1990, Vol. 57 Issue 21, p2265 

    The changes in the superconducting properties of in situ pulsed laser deposited Y1Ba2Cu3O7-x thin films caused by irradiation with 200 keV He+ ions are due to both oxygen loss as well as oxygen and cationic displacements induced by the irradiation. This is demonstrated by a study of the recovery...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics