TITLE

High-power operation of InP/InGaAsP double-channel planar buried-heterostructure lasers with asymmetric facet coatings

AUTHOR(S)
Koszi, L. A.; Temkin, H.; Pryzbylek, G. J.; Segner, B. P.; Napholtz, S. G.; Bogdanowicz, C. M.; Dutta, N. K.
PUB. DATE
December 1987
SOURCE
Applied Physics Letters;12/28/1987, Vol. 51 Issue 26, p2219
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We report the high-power operation of λ=1.3 μm InGaAsP double-channel planar buried-heterostructure lasers with asymmetric mirror coatings. A stack of four dielectric layers is used to raise the reflectivity of one facet to over 80%, and the thickness of a single layer coating on the output facet is chosen to reduce the reflectivity to about 4%. The resulting lasers are characterized by a low threshold current of 25 mA, slope efficiency as high as 50%, and a power output of as much as 150 mW (at 5 °C) at a current of less than 300 mA. The lasers operate in a single transverse mode over the entire current range and as much as 45 mW of power could be coupled into a lensed single-mode fiber. Preliminary high-power aging data show excellent device reliability.
ACCESSION #
9825454

 

Related Articles

  • Tungsten metallization for stable and self-aligned InP-based laser devices. Katz, A.; Pearton, S. J.; Geva, M. // Journal of Applied Physics;10/1/1990, Vol. 68 Issue 7, p3110 

    Presents a study which investigated tungsten thin films on n-InP layers for potential use as a refractory ohmic contact for self-aligned In-based etched mesa buried heterostructures laser devices. Experimental procedure; Results and discussion; Conclusions.

  • Impact of resistance on cathodoluminescence and its application for layer sheet-resistance measurements. Czerwinski, A.; Pluska, M.; Ratajczak, J.; Szerling, A.; Kątcki, J. // Applied Physics Letters;7/28/2008, Vol. 93 Issue 4, p041109 

    The dependence of cathodoluminescence (CL) on resistances in semiconductor structures, especially on layer resistances, is described. The effect can be taken advantage of and used for characterization of sheet resistance of thin layers in semiconductor devices, as illustrated in this paper by an...

  • Pyroelectric PbSc[sub 0.5]Ta[sub 0.5O3]/Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7-x] thin film.... Bjormander, C.; Sreenivas, K. // Applied Physics Letters;7/3/1995, Vol. 67 Issue 1, p58 

    Examines the growth of ferroelectric PbSc[sub 0.5]Ta[sub 0.5]O[sub 3]/Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7-x] thin film heterostructures using pulsed laser deposition. Regulation of dielectric properties by the electric field; Quantification of the film physical properties; Dependence of...

  • Strain effects and microstructure of epitaxial manganite thin films and heterostructures. Wiedenhorst, B.; Hofener, C. // Applied Physics Letters;6/14/1999, Vol. 74 Issue 24, p3636 

    Describes the growth of epitaxial La[sub 2/3]Sr[sub 1/3]MnO[sub 3] and La[sub 2/3]Ba[sub 1/3]MnO[sub 3] thin films as well as La[sub 2/3]Ba[sub 1/3]MnO[sub 3]/SrTiO[sub 3] heterostructures by pulsed-laser deposition. Analysis of the manganite thin films' microstructure by x-ray diffraction and...

  • Epitaxial κ-(AlxGa1−x)2O3 thin films and heterostructures grown by tin-assisted VCCS-PLD. Storm, P.; Kneiß, M.; Hassa, A.; Schultz, T.; Splith, D.; von Wenckstern, H.; Koch, N.; Lorenz, M.; Grundmann, M. // APL Materials;Nov2019, Vol. 7 Issue 11, pN.PAG 

    The structural, surface, and optical properties of phase-pure κ-(AlxGa1−x)2O3 thin films on c-sapphire and STO(111):Nb substrates as well as on MgO(111) and κ-Ga2O3 templates are reported as a function of alloy composition for x < 0.4. The thin films were grown by tin-assisted pulsed...

  • Depth-dependence of electrical conductivity of diamondlike carbon films. Sikora, A.; Paolino, P.; Ftouni, H.; Guerret-Piécourt, C.; Garden, J.-L.; Loir, A.-S.; Garrelie, F.; Donnet, C.; Bourgeois, O. // Applied Physics Letters;4/19/2010, Vol. 96 Issue 16, p162111 

    The electrical behavior of diamondlike carbon (DLC) has been measured as a function of depth. The amorphous carbon (a-C) films are deposited by pulsed laser deposition using two complementary setups: a femtosecond (fs) and a nanosecond (ns) pulse lasers. It is demonstrated through four probe...

  • Fatigue and retention in ferroelectric Y-Ba-Cu-O/Pb-Zr-Ti-O/Y-Ba-Cu-O heterostructures. Ramesh, R.; Chan, W.K. // Applied Physics Letters;9/28/1992, Vol. 61 Issue 13, p1537 

    Examines the fatigue and retention characteristics of ferroelectric lead zirconate titanate thin films grown with Y-Ba-Cu-O (YBCO) thin film. Growth of heterostructures by pulsed laser deposition; Use of the YBCO lattice a- and c-axis orientations as electrodes; Measurement of the pulse...

  • Low temperature synthesis and electrical properties of epitaxial Sr[sub 0.8]Bi[sub 2.2]Ta[sub 2]O[sub 9] thin films. Chattopadhyay, Soma; Kvit, A.; Kumar, D.; Sharma, A. K.; Sankar, J.; Narayan, J.; Knight, V. S.; Coleman, T. S.; Lee, C. B. // Applied Physics Letters;5/28/2001, Vol. 78 Issue 22, p3514 

    High quality epitaxial thin films of Sr[sub 0.8]Bi[sub 2.2]Ta[sub 2]O[sub 9] (SBT) were grown on LaNiO[sub 3] (LNO) bottom electrodes. The SBT/LNO heterostructure was fabricated on (001) oriented LaAlO[sub 3] substrates by pulsed laser ablation. X-ray diffraction and high resolution transmission...

  • Highly tunable SrTiO3/DyScO3 heterostructures for applications in the terahertz range. Kuzˇel, P.; Kadlec, F.; Petzelt, J.; Schubert, J.; Panaitov, G. // Applied Physics Letters;12/3/2007, Vol. 91 Issue 23, p232911 

    Several types of multilayer structures based on SrTiO3 and DyScO3 thin films were prepared by laser ablation. The dielectric properties of these samples without and under applied static or low-frequency electric field at room temperature were determined in the terahertz spectral range by...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics