Comment on ‘‘Diffusion model for the laser oxidation of metallic samples in air’’ [Appl. Phys. Lett. 49, 109 (1987)]

Fang, P. H.
December 1987
Applied Physics Letters;12/14/1987, Vol. 51 Issue 24, p2062
Academic Journal
Comments on the article by Ursu et.al. focusing on the diffusion of copper ions through a vacancy mechanism by a cuprous oxide film under laser irradiation. Modified expression for the diffusivity; Laser oxidation of metal samples in air; Diffusion coeffcient of the charged particles.


Related Articles

  • Use of a laser beam interference technique for the determination of the minority carrier.... Levy, D.; Weiser, K. // Applied Physics Letters;4/3/1995, Vol. 66 Issue 14, p1788 

    Examines the use of laser beam interference technique to determine carrier properties of semiconductor devices. Calculation of the diffusion length of minority carriers; Variation in the illumination pattern produced by laser beams; Determination of photovoltage between two ohmic contacts.

  • Measurement of thermal diffusivity parallel to the surface of platelike specimen by the laser... Yamane, Tsuneyuki; Katayama, Shin-ichiro; Todoki, Minoru // Review of Scientific Instruments;Dec1996, Vol. 67 Issue 12, p4261 

    Develops a method to measure the thermal diffusivity parallel to the surface of a platelike specimen using laser pulse heating. Irradiation of a pulsed laser beam onto the front surface of the specimen; Determination of the apparatus' geometry by using standard specimens and the thermal...

  • Nonstationary temperature distribution caused by bulk absorption of laser pulse. Gurevich, Yuri; Logvinov, Georgi; de Rivera, Luis Niño; Titov, Oleg // Review of Scientific Instruments;Jan2003, Vol. 74 Issue 1, p441 

    Nonequilibrium temperature is calculated and analyzed in a one-dimensional sample irradiated by a laser rectangular pulse. The general solution is obtained for arbitrary pulse duration compared with the relaxation time of nonstationary thermal diffusion (characteristic time of the problem).

  • Surface diffusion growth and stability mechanism of BN nanotubes produced by laser beam heating.... Louchev, Oleg A. // Applied Physics Letters;12/15/1997, Vol. 71 Issue 24, p3522 

    Examines the production of BN nanotubes surface diffusion growth and stability mechanism using laser beam heating under superhigh pressures. Consideration of surface diffusion and adsorption energy dependence on surface curvature; Implication for morphological stability of BN nanotube tube open...

  • Fourier transform analysis of light-beam-induced current profiles. Mittiga, A.; Capizzi, M. // Journal of Applied Physics;10/15/1987, Vol. 62 Issue 8, p3443 

    Focuses on Fourier transform of light-beam-induced current profiles expressed in a closed form. Use of standard minimization procedures on a personal computer; Influence of the experimental errors on the estimate of the diffusion length and of the recombination velocity; Procedure of fitting...

  • Spatially resolved differential resistance of bulk superconductors by laser-induced heating. McLaren, Robert; Dovichi, Norman J. // Journal of Applied Physics;11/1/1990, Vol. 68 Issue 9, p4882 

    Presents a study that generated spatially resolved measurements of the change in resistance with temperature of bulk high-temperature superconductors by heating a localized region of a sample with a modulated laser beam. Relation of the amplitude of the thermally induced resistance change to...

  • Fabrication of microlenses in Ag-doped glasses by a focused continuous wave laser beam. Antonov, I.; Bass, F.; Kaganovskii, Yu.; Rosenbluh, M.; Lipovskii, A. // Journal of Applied Physics;3/1/2003, Vol. 93 Issue 5, p2343 

    A technique for the fabrication of small (2-10 µm in diameter) microlenses on the surface of glass with embedded silver nanoclusters in a subsurface diffusion layer is demonstrated. The dependence of the microlens size on the exposure time and the laser power of a focused continuous wave (cw)...

  • Application of an optical birefringence interferometer to photothermal detection for characterizing thermal diffusivities. Xu, X. D.; Zhang, S. Y.; Kuo, P. K. // Review of Scientific Instruments;Jan2003, Vol. 74 Issue 1, p639 

    In the pulsed photothermal displacement detection, the signals are strongly dependent upon the thermal properties of materials. The thermoelastic displacement excited by a pulsed laser is detected by a birefringence interferometer. Meanwhile, thermal diffusivities of plate samples are evaluated...

  • Using two-photon standing waves and patterned photobleaching to measure diffusion from nanometers to microns in biological systems. Davis, Sara K.; Bardeen, Christopher J. // Review of Scientific Instruments;May2002, Vol. 73 Issue 5, p2128 

    A method of measuring molecular diffusion rates in microscopic sample volumes is described. This method utilizes the standing wave interference created by colliding two counterpropagating laser beams at the focus of two opposing microscope objectives, creating a periodic light distribution in a...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics