TITLE

Synthesis of superconducting films of the Y-Ba-Cu-O system by a screen printing method

AUTHOR(S)
Budhani, R. C.; Tzeng, Sing-Mo H.; Doerr, H. J.; Bunshah, R. F.
PUB. DATE
October 1987
SOURCE
Applied Physics Letters;10/19/1987, Vol. 51 Issue 16, p1277
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A screen printing method has been used to deposit superconducting films of Y-Ba-Cu-O materials on Al2O3 substrates. The electrical resistivity, microstructure, and adhesion of these films are highly sensitive to the post-printing heat treatment. Films heat treated at 950 °C and below are poorly adherent, whereas those annealed above 1000 °C undergo phase separation to Y2Cu2O5 and BaCuO2 and also react with the substrate. Nearly single phase, highly adherent, and smooth films showing a zero resistance state at 79 K have been synthesized by optimizing the annealing conditions.
ACCESSION #
9824506

 

Related Articles

  • Angle-dependent laser-induced voltages in room-temperature polycrystalline wafers of YBa2Cu3O7-x. Tate, K. L.; Hilinski, E. F.; Foster, S. C. // Applied Physics Letters;12/3/1990, Vol. 57 Issue 23, p2407 

    Room-temperature laser-induced voltages were observed in unsupported, polycrystalline wafers of YBa2Cu3O7-x in the absence of a transport current. Peak voltages of ∼1 V were detected in response to 40 mJ pulses of 532 nm light. The rise and fall times for the signals were detector limited....

  • Single-crystal preparation and some characterizations of the superconducting Y-Ba-Cu oxide. Haneda, Hajime; Isobe, Mitsumasa; Hishita, Shunichi; Ishizawa, Yoshio; Shirasaki, Shin-ichi; Yamamoto, Taisei; Yanagitani, Takagimi // Applied Physics Letters;11/30/1987, Vol. 51 Issue 22, p1848 

    Single crystals of Ba2YCu3O7-δ were prepared from melts of a BaO-Y2O3-CuO mixture and characterized by the x-ray microprobe analyzer and x-ray diffraction. Electrical resistivity was measured by the standard four-terminal method. Some crystals have the critical temperature above 77 K. After...

  • Structural characterization of a TlCaBaCu oxide in Tc onset=155 K and Tc zero=123 K superconducting specimens. Liang, J. M.; Liu, R. S.; Chang, L.; Wu, P. T.; Chen, L. J. // Applied Physics Letters;10/10/1988, Vol. 53 Issue 15, p1434 

    The crystal structure of a Tl-Ca-Ba-Cu-O compound in Tc onset=155 K and Tc zero=123 K superconducting specimens was characterized by transmission electron microscopy. Convergent beam electron diffraction analysis established that the phase is of P4/mcc space group. The lattice parameters of the...

  • Properties of Bi(Pb)-Sr-Ca-Cu-O superconducting tapes prepared by the doctor-blade process. Yanagisawa, E.; Morimoto, T.; Dietderich, D. R.; Kumakura, H.; Togano, K.; Maeda, H. // Applied Physics Letters;6/19/1989, Vol. 54 Issue 25, p2602 

    Improved superconducting and mechanical properties were obtained for Bi(Pb)-Sr-Ca-Cu-O tapes, prepared by the combined process of doctor-blade casting, cold rolling, and sintering. The tape has an oriented microstructure with the high Tc plate-like grains having their c axes perpendicular to the...

  • Effect of Li doping on the critical temperature and glass formation in the Bi�Sr�Ca�Cu�O system. Volkov, M. P.; Melekh, B. T.; Bakharev, V. I.; Kartenko, N. F.; Matykin, N. V.; Filin, Yu. N. // Physics of the Solid State;Jan99, Vol. 41 Issue 1, p15 

    A study has been made of the glass-forming ability, structure, and superconducting properties of Bi[sub 2.2]Sr[sub 1.8]Ca[sub 1.05]Cu[sub 2.15]Li[sub x]O[sub y] and Bi[sub 2.2]Sr[sub 1.8]Ca[sub 1.05]Cu[sub 2.15 - x]Li[sub x]O[sub y] (x = 0; 0.3; 0.5; 0.7). The compounds were melted by rf at T =...

  • Synthesis of a Bi[sub 2]Sr[sub 2]CaCu[sub 2]O[sub y] high-temperature superconducting phase with T[sub c][sup °] above 100 K. Tomilo, Zh. M.; Prytkova, N. A.; Gololobov, E. M.; Turtsevich, D. M. // Technical Physics Letters;Jun97, Vol. 23 Issue 6, p422 

    A high-temperature superconductor with the Bi[sub 2]Sr[sub 2]CaCu[sub 2]O[sub y] structure and a superconducting transition temperature T[sup º, sub c] = 102-107 K has been synthesized. The synthesis conditions are described and results of a phase analysis, and of resistive and inductive...

  • Vapor-deposited superconducting YBa2Cu3O7-δ lines: Effect of thickness and width on morphology. Phillips, J. R.; Mayer, J. W.; Martin, J. A.; Nastasi, M. // Applied Physics Letters;4/2/1990, Vol. 56 Issue 14, p1374 

    Lines of different widths and thicknesses of YBa2Cu3O7-δ were prepared on SrTiO3 and compared for signs of morphological dependence on line dimensions. The lines were prepared on (100) SrTiO3 by electron beam (e-beam) coevaporation, e-beam resist lift-off, and annealing in oxygen to 850...

  • Tailored thin films of a superconducting Bi-Sr-Ca-Cu oxide prepared by incorporation of exotic atoms—control of the distance between CuO2 layers. Tabata, Hitoshi; Murata, Osamu; Kawai, Tomoji; Kawai, Shichio // Applied Physics Letters;4/16/1990, Vol. 56 Issue 16, p1576 

    A layer-by-layer successive deposition method utilizing laser ablation has been applied to the site-selective incorporation of +1, +2, and +3 ions at the Ca and Sr site of Bi2Sr2Ca1Cu2O8 superconducting films. The replacement of Ca by larger ions increases the lattice parameter c and Tc...

  • Giant microwave losses in a YBaCuO bicrystal. Pakulis, E. J.; Blum, S. E. // Applied Physics Letters;10/1/1990, Vol. 57 Issue 14, p1464 

    We have observed a large peak in microwave losses, as a function of temperature, in a superconducting Y1Ba2Cu3O7 bicrystal containing a large-area, low-angle grain boundary. The maximum observed loss was approximately twice the normal state loss. We attribute the peak to enhanced losses...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics