TITLE

Ion-chain interaction in keV ion-beam-irradiated polystyrene

AUTHOR(S)
Calcagno, L.; Foti, G.; Licciardello, A.; Puglisi, O.
PUB. DATE
September 1987
SOURCE
Applied Physics Letters;9/21/1987, Vol. 51 Issue 12, p907
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Molecular weight distribution has been measured in monodisperse polystyrene film (MW=9 000 amu) after ion bombardment, in the ion fluence range 1011–1013 ions/cm2. The chosen beams are 100 keV He, 200 keV Ne, and 400 keV Ar. The experimental data have been interpreted in terms of a simple statistical model for cross-links. The chemical yield is found to be very high and equal to 0.30, about a factor of 10 higher than the values given in the literature for gamma irradiation [M. Dole, in The Radiation Chemistry of Macromolecules (Academic, New York, 1973), Vol. 2, Chap. 5, p. 57].
ACCESSION #
9824214

 

Related Articles

  • Application of large molecular weight poly (4-styrenesulfonate) as a binding phase of the diffusive gradients in thin films technique. Hong Chen; Yu-jing Liu; Yu-hua Jiang; Jia-Li Gu; Ting Sun // Desalination & Water Treatment;Dec2012, Vol. 50 Issue 1-3, p125 

    As the replacement of previously recommended poly (4-styrenesulfonate) (PSS) with 4 Mw 7 ~ 104 (PSS-7E4) for measuring metal ions by diffusive gradients in thin films (DGT), a 6 relatively large molecular weight PSS with Mw ~ 1 x 106 (PSS-E6) was used as binding phase in the liquid-type DGT...

  • milliosmole.  // Taber's Cyclopedic Medical Dictionary (2009);2009, Issue 21, p1472 

    A definition of the term "milliosmole," which refers to one thousandth of an osmole, is presented.

  • Electric birefringence in a polystyrene melt. Polushin, S.; Rogozhin, V.; Zakhryapa, A.; Ryumtsev, E. // Doklady Physical Chemistry;May2011, Vol. 438 Issue 1, p83 

    The article focuses on the electric birefringence (Kerr effect) in melts of oligomer and polymer, the two narrow fractions of polystyrene. It states that Kerr effect is a method for studying the macromolecule structures and intra-and supramolecular orientation order in polymers. It mentions that...

  • Drawing suspended polymer micro-/nanofibers using glass micropipettes. Nain, Amrinder S.; Wong, Joanna C.; Amon, Cristina; Sitti, Metin // Applied Physics Letters;10/30/2006, Vol. 89 Issue 18, p183105 

    This letter proposes a method for fabricating suspended micro-/nanoscale polymer fibers continuously, in which polymeric micro-/nanofibers are formed by drawing and solidification of a viscous liquid polymer solution which is pumped through a glass micropipette. By controlling the drawing...

  • Analysis of plume following ultraviolet laser ablation of doped polymers: Dependence on polymer molecular weight. Rebollar, Esther; Oujja, Mohamed; Bounos, Giannis; Kolloch, Andreas; Georgiou, Savas; Castillejo, Marta // Journal of Applied Physics;2/1/2007, Vol. 101 Issue 3, p033106 

    This work investigates the effect of polymer molecular weight MW on the plume characteristics of poly(methyl methacrylate) (PMMA) and polystyrene (PS) films doped with iodonaphthalene (NapI) and iodophenanthrene (PhenI) following irradiation in vacuum at 248 nm. Laser-induced fluorescence...

  • Influence of the average molecular weight and the concentration of plasticizer on the orientational dynamics of chromophores in guest-host polymers. Ribierre, J. C.; Mager, L.; Gillot, F.; Fort, A.; Méry, S. // Journal of Applied Physics;8/15/2006, Vol. 100 Issue 4, p043103 

    We report experimental results obtained from dielectric spectroscopy, electro-optic, and second harmonic generation dynamics measurements on different polymers doped with nonlinear optical chromophores. The polymers considered in this work are polyvinylcarbazole plasticized by ethylcarbazole and...

  • Examination of the influence of molecular weight on polymer laser ablation: polystyrene at 248 nm. Rebollar, Esther; Bounos, Giannis; Selimis, Alexandros; Castillejo, Marta; Georgiou, Savas // Applied Physics A: Materials Science & Processing;Sep2008, Vol. 92 Issue 4, p1043 

    Following previous studies on the influence of the polymer molecular weight (MW) on the ablation of poly(methyl methacrylate) (PMMA) at 248 nm, this work extends the examination to the ablation of polystyrene (PS) at 248 nm. The ablation threshold and the etching rates are found to be nearly...

  • Preparation of High Molecular Weight Poly(vinyl carbazole)/Polystyrene Blend Web by Electrospinning. Hee Sam Kim; Ki Bum Lee; Young Jae Lee; Min Jae Kim; Jin Wook Cha; Tae Hwan Oh; Seok Kyun Noh; Yong Rok Lee; Sung Soo Han; Eun Joo Shin; Yeong Soon Gal; Won Seok Lyoo // Polymers & Polymer Composites;2012, Vol. 20 Issue 7, p609 

    To prepare fine and even poly(N-vinyl carbazole) (PVCz)/polystyrene (PS) blend webs, we performed a series of experiments varying processing parameters, including the type of solvent, PVCz/PS blend ratio, applied voltage, and tip to the collector distance (TCD). It was found that the morphology...

  • Investigating the possibility of modifying polystyrene with polysaccharides with the aim of producing biodegradable grades. Sadrieva, A. G.; Boreiko, N. P.; Trifonova, O. M.; Garifutdinov, M. K. // International Polymer Science & Technology;2014, Vol. 41 Issue 11, pT/19 

    The results of modifying polystyrene with thermooxidised starch with different molecular weight characteristics are presented. An assessment is made of the influence of the additives used in different concentrations on the characteristics of the initial polymer.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics