TITLE

Molybdenum-silicon multilayer monochromator for the extreme ultraviolet

AUTHOR(S)
Barbee, Troy W.; Pianetta, Piero; Redaelli, Renato; Tatchyn, Roman
PUB. DATE
June 1987
SOURCE
Applied Physics Letters;6/22/1987, Vol. 50 Issue 25, p1841
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A two-element molybdenum-silicon multilayer monochromator has been tested in the energy range 60–110 eV on a differentially pumped bending magnet beamline having a high-energy cutoff of 3.5 keV at the Stanford Synchrotron Radiation Laboratory. The multilayer structures were sputter deposited onto 5-cm-diam (111) single-crystal silicon and contained 20 molybdenum layers (4.93 nm thick) separated by amorphous silicon layers (7.8 nm thick). A 1200 l/mm gold transmission grating was used to independently measure the wavelength passed by the monochromator. The Al L2,3 absorption edge jump was also measured using the monochromator. These experimental results are compared to model calculations for both the synchrotron source-monochromator and the synchrotron source-monochromator-Al filter configurations and excellent agreement is shown.
ACCESSION #
9823325

 

Related Articles

  • Foreword. Sakidja, Ridwan // Metallurgical & Materials Transactions. Part A;Mar2014, Vol. 45 Issue 3, p1101 

    An introduction is presented in which the editor discusses various reports within the issue on topics including development of Molybdenum-based alloys, performance of multi-component Niobium-based alloys, and advancements in ultra-high temperature structural alloys.

  • Special features of transformations, structure and properties of molybdenum high-speed steels. Kremnev, L. S.; Onegina, A. K.; Vinogradova, L. A. // Metal Science & Heat Treatment;Nov2009, Vol. 51 Issue 11/12, p579 

    The advantages of molybdenum high-speed steels over tungsten and tungsten-molybdenum high-speed steels due to the special features of their transformations and structures are shown.

  • Nitrogenase: Carbon in the middle. Withers, Neil // Nature Chemistry;Feb2012, Vol. 4 Issue 2, p68 

    The article discusses the results of studies that confirm, using different experimental techniques, that the interstitial atom in the iron-molybdenum cofactor is carbon.

  • Molybdenum Alloys and emerging applications. Shields, Jr., John A.; Baker, Ernest L. // Advanced Materials & Processes;Jan1999, Vol. 155 Issue 1, p61 

    Discusses the properties of molybdenum that make it such a useful material, some current applications, and examples of two emerging applications. Physical and mechanical properties; Commercial alloys; Electronic applications; Other applications in vacuum furnaces and glass melting; Emerging...

  • MOLYBDENUM FOR ALLOYING AND COMMERCIAL APPLICATIONS.  // Modern Machine Shop;Sep2008, Vol. 81 Issue 4, p307 

    The article evaluates the molybdenum alloys from Goodfellow Corp.

  • Structure and growth of monoclinic Mo[sub 2]S[sub 3] nanorods. Che, R.C.; Bai, N.; Peng, L.-M. // Applied Physics Letters;10/27/2003, Vol. 83 Issue 17, p3561 

    We report the synthesis of sulfide nanostructures with trivalent molybdenum, i.e., crystalline Mo[sub 2]S[sub 3] nanorods via a solid-gas reaction between porous Al[sub 2]O[sub 3] impregnated with MoO[sub 3] and H[sub 2]S gas. We show that the introduction of additional 8% H[sub 2] gas results...

  • Interaction of amorphous MoNix alloys with silicon. Rastogi, R. S.; Vankar, V. D.; Chopra, K. L. // Journal of Applied Physics;2/15/1990, Vol. 67 Issue 4, p1868 

    Presents a study that investigated interaction of amorphous molybdenum-nickel alloys with silicon. Analysis of the Auger electron spectroscopy depth profile of the alloys; Examination of the x-ray diffraction spectra of the alloys; Evaluation of the electrical properties of the alloys.

  • Exfoliated MoS2 monolayers as substrates for magnetic materials. Frindt, R. F.; Arrott, A. S.; Curzon, A. E.; Heinrich, B.; Morrison, S. R.; Templeton, T. L.; Divigalpitiya, R.; Gee, M. A.; Joensen, P.; Schurer, P. J.; LaCombe, J. L. // Journal of Applied Physics;11/15/1991, Vol. 70 Issue 10, p6224 

    Details a study which prepared fine particles of magnetic materials using monomolecular layers of molybdenum sulphide as substrates. Exfoliation of molybdenum sulphide; Composition and properties of iron, cobalt and nickel precipitated from aqueous solutions; Magnetic susceptibility of metal atoms.

  • Soft x-ray beamline BL7A at the UVSOR. Murata, T.; Matsukawa, T.; Naoé, S.; Horigome, T.; Matsudo, O.; Watanabe, M. // Review of Scientific Instruments;Jan1992, Vol. 63 Issue 1, p1309 

    A vacuum-compatible double-crystal monochromator with constant exit-beam height has been installed and operated for several years at beamline BL7A at the UVSOR facility at the Institute for Molecular Science, Okazaki, Japan, The beamline is used both for the photons from a normal bending-magnet...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics