TITLE

Isotopic enrichment in a plasma centrifuge

AUTHOR(S)
Del Bosco, E.; Dallaqua, R. S.; Ludwig, G. O.; Bittencourt, J. A.
PUB. DATE
June 1987
SOURCE
Applied Physics Letters;6/15/1987, Vol. 50 Issue 24, p1716
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
High rotational velocity and centrifugal isotopic separation of carbon in a vacuum-arc plasma centrifuge are presented. Enrichments of up to 390% for 13C are measured at 6 cm radius with angular rotation frequencies in excess of 1.0×105 rad/s in an axial magnetic field of 0.12 T.
ACCESSION #
9823288

 

Related Articles

  • Inductive energy storage driven vacuum arc thruster. Schein, J.; Qi, N.; Binder, R.; Krishnan, M.; Ziemer, J. K.; Polk, J. E.; Anders, A. // Review of Scientific Instruments;Feb2002, Vol. 73 Issue 2, p925 

    A new type of vacuum arc thruster in combination with an innovative power processing unit (PPU) has been developed that promises to be a high efficiency (∼15%), low mass (∼100 g) propulsion system for micro- and nanosatellites. This thruster accelerates a plasma that consists almost...

  • Effect of residual gas on the ion charge distribution in vacuum arc discharge plasmas. Nikolaev, A. G.; Oks, E. M.; Yushkov, G. Yu. // Technical Physics;Sep98, Vol. 43 Issue 9, p1031 

    A magnetic mass analyzer and time-of-flight mass spectrometer are used to study the effect of the pressure and type of residual gas on the ion charge distribution in the plasma of an arc discharge with a cathode spot. The possibility of ionizing a substantial fraction of the gas atoms in this...

  • Interelectrode plasma evolution in a hot refractory anode vacuum arc: Theory and comparison with experiment. Beilis, I. I.; Goldsmith, S.; Boxman, R. L. // Physics of Plasmas;Jul2002, Vol. 9 Issue 7, p3159 

    In this paper a theoretical study of a hot refractory anode vacuum arc, which was previously investigated experimentally [Phys. Plasmas 7, 3068 (2000)], is presented. The arc was sustained between a thermally isolated refractory anode and a water-cooled copper cathode. The arc started as a...

  • Macroparticle separation and plasma collimation in positively biased ducts in filtered vacuum arc... Beilis, I. I.; Keidar, M. // Journal of Applied Physics;2/1/1999, Vol. 85 Issue 3, p1358 

    Presents information on a study which determined the influence of positive bias on plasma and macroparticle flow in curved magnetized plasma ducts in filtered vacuum arc deposition systems. Macroparticle-plasma interaction; Results and discussion; Conclusions.

  • Effect of multiple current spikes on the enhancement of ion charge states of vacuum arc plasmas. Yu, George; Oks, Efim M. // Journal of Applied Physics;6/15/2000, Vol. 87 Issue 12, p8345 

    Presents a study of the effect of multiple current spikes on the enhancement of ion charge state distributions of vacuum arc plasmas. Experimental setup; Effect of a magnetic field and a single current spike; Discussion and conclusion.

  • Metal vapor vacuum arc ion source. Brown, I. G.; Galvin, J. E.; Gavin, B. F.; MacGill, R. A. // Review of Scientific Instruments;Jun86, Vol. 57 Issue 6, p1069 

    A high-current ion source is described in which a metal vapor vacuum arc is used to create the plasma from which the ion beam is extracted. An ion beam current of up to about 1 A has been measured at an extraction voltage of 25 kV for a range of metallic species spanning the periodic table from...

  • Acceleration of a Multicomponent Plasma in the Cathode Region of a Vacuum Arc. Krinberg, I. A. // Technical Physics;Nov2001, Vol. 46 Issue 11, p1371 

    A general solution to the problem of the steady-state spherical expansion of a current-carrying multicomponent plasma into a vacuum is derived. It is shown that, in vacuum arc discharges, the main force accelerating the cathode material, which becomes a plasma at distances of 1 to 300 µm from...

  • Investigations of forming metal-plasma flows filtered from microparticle fraction in vacuum arc evaporators. Ryabchikov, A. I.; Stepanov, I. B. // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p810 

    Investigates the formation of metal-plasma flows filtered from microparticle fraction in vacuum arc evaporators. Variation of the traveling path of the plasma charged component; Maintenance of the motion of the neutral plasma component; Use of the plasma filtering system for coatings.

  • Vacuum arc ion and plasma source Raduga 5 for materials treatment. Ryabchikov, A. I.; Dektjarev, S. V.; Sergeev, O. V.; Stepanov, I. B. // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p893 

    Describes the vacuum arc ion and plasma source Raduga 5 for materials treatment. Generation of plasma through a discharge current vacuum arc; Use of a straight-line plasma filter in cleaning the vacuum arc plasma; Significance of metal plasma flow generation for ion assisted metal plasma...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics