TITLE

Effect of thermodynamics on ion mixing

AUTHOR(S)
Workman, T. W.; Cheng, Y. T.; Johnson, W. L.; Nicolet, M-A.
PUB. DATE
May 1987
SOURCE
Applied Physics Letters;5/25/1987, Vol. 50 Issue 21, p1485
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Ion mixing of elemental 4d-5d metallic bilayers at 77 K by 600 keV Xe++ ions has been studied to test the validity of the phenomenological model of ion mixing that predicts a dependence on the chemical heats of mixing, ΔHmix, and on the cohesive energies, ΔHcoh, of the bilayer elements. A series of samples was chosen to minimize the variation in kinematical properties between samples while maximizing the variation in heats of mixing. The experimental results agree well with the model’s predictions, and the experimentally determined constants K1=0.034 Å and K2=27 agree with those of previous work.
ACCESSION #
9823082

 

Related Articles

  • Thermodynamic effects in depth profiling and ion-beam mixing without invoking thermal spikes. Kelly, Roger; Miotello, Antonio // Applied Physics Letters;5/16/1994, Vol. 64 Issue 20, p2649 

    Examines thermodynamic effects in depth profiling and ion-beam mixing without invoking thermal spikes. Sensitivity of the extent of ion-beam mixing to the sign and magnitude of the heat of mixing; Analysis of the profiling experiments of Marton, Fine, and Chambers on multilayers of...

  • Thermochemistry of Natural Hypersaline Water Systems Using the Urmia lake as a Case. Heidari, Nosrat; Alvanag, Somayeh Sakeni; mokhtarpoor, Masomeh // Journal of Environment & Earth Science;2012, Vol. 2 Issue 11, p98 

    In order to study the heat effect of mixing of fresh waters (winter rains in the form of floods) with Urmia lake water, the heats of mixing of Urmia lake water with distilled water at 25ºC have been measured. On the basis of these experimental data, the heats of dilution of freshwater in...

  • Modelling of the thermal effects involved in the determination of heat of mixing, using an ITC operating in continuous mode. de Rivera, M. Rodríguez; Socorro, F.; Matos, J. S. // Journal of Thermal Analysis & Calorimetry;Mar2010, Vol. 99 Issue 3, p791 

    A simplified RC model which simulates the operation mode of an isothermal titration calorimeter (ITC), when it is used in a continuous mode to determine heat of mixing, is proposed. The model takes into account several thermal effects that are evident in the mixing process and it must be...

  • Influence of additional elements on the development of nanoscale heterogeneities in (TiCu)-based bulk metallic glasses with enhanced ductility. Zhang, X. F.; Kim, K. B.; Das, J.; Yi, S.; Eckert, J. // Journal of Materials Research;Aug2007, Vol. 22 Issue 8, p23 

    The effect of additional elements on microstructure and mechanical properties of (TiCu)-based bulk metallic glasses (BMGs) has been systematically investigated. Based on the values of the heat of mixing between the additional elements and the major constituent elements Ti and Cu, small additions...

  • Heat of Mixing in the Al–In System. Bykov, A. S.; Pastukhov, E. A. // Doklady Physical Chemistry;Mar2004, Vol. 395 Issue 1-3, p76 

    Studies the effect of the separation of a liquid alloy on the concentration dependence of the heat of mixing. Physicochemical properties of liquid metals and alloys; Conditions of coexistence of two immiscible liquid phases; Formation of new solutions characterized by individual heats of mixing.

  • Exergy analysis of a compression–absorption system for heating and cooling applications. Satapathy, Prasanta Kumar // International Journal of Energy Research;Nov2008, Vol. 32 Issue 14, p1266 

    An exergy analysis of a single-stage compression–absorption system with R22-E181 as the working fluid pair is carried out. Theoretical results obtained have been compared with those obtained from the experiment. Results show that the heat of mixing of the refrigerant vapour and solution...

  • Application of electrokinetic instability for enhanced mixing in various micro–T-channel geometries. Jaewan Park; Shin, S. M.; Huh, Kang Y.; Kang, I. S. // Physics of Fluids;Nov2005, Vol. 17 Issue 11, p118101 

    We present simple effective micromixer designs utilizing electrokinetic instability (EKI) with downstream cavity structures in a micro-T channel. The amount of free charge increases at each corner of the cavities where inhomogeneous flow stream meets the electric field curved along the...

  • Multistream mixing head with unique twin filler dosing system for hot cast elastomers. Decker, Christian; Dormann, Bjoern // Rubber World;Oct2010, Vol. 243 Issue 1, p24 

    The article offers information on Desma mixing technology that has twin filler dosing system for hot cast elastomers. It notes that it uses low pressure mixing technology and with that principle, Desma technology is able to react on every kind of different material. It can also be used for...

  • Novel organic monotectic alloy and its thermal, physicochemical, and microstructural studies. Sharma, K. P.; Rai, R. N. // Journal of Materials Science;Mar2011, Vol. 46 Issue 5, p1551 

    The phase diagram study of an organic analogue of a nonmetal-nonmetal system involving 4-bromochlorobenzene and resorcinol shows the formation of a eutectic and a monotectic. The phase equilibrium shows the large miscibility gap region with the consolute temperature 143.0 °C. Growth kinetics...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics