TITLE

Finite element design of diamond anvils

AUTHOR(S)
Moss, William C.; Goettel, Kenneth A.
PUB. DATE
January 1987
SOURCE
Applied Physics Letters;1/5/1987, Vol. 50 Issue 1, p25
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We have performed finite element analyses of beveled diamond anvils. Our analyses show that double beveling can improve the performance of the diamond anvil cell and maintain the stability of the sample, which is often sacrificed when large angle single bevel diamonds are used.
ACCESSION #
9821814

 

Related Articles

  • Coupled plastic flow and phase transformation under compression of materials in a diamond anvil cell: Effects of transformation kinetics and yield strength. Zarechnyy, Oleg M.; Levitas, Valery I.; Ma, Yanzhang // Journal of Applied Physics;Jan2012, Vol. 111 Issue 2, p023518 

    The large-strain problem on phase transformations (PTs) under compression in a diamond anvil cell is studied in detail using the finite-element method. The combined effect of transformation kinetics and ratios of the yield strengths of low- and high-pressure phases is examined. Some experimental...

  • Strain-induced phase transformations under compression, unloading, and reloading in a diamond anvil cell. Feng, Biao; Zarechnyy, Oleg M.; Levitas, Valery I. // Journal of Applied Physics;May2013, Vol. 113 Issue 17, p173514 

    Strain-induced phase transformations (PTs) in a sample under compression, unloading, and reloading in a diamond anvil cell are investigated in detail, by applying finite element method. In contrast to previous studies, the kinetic equation includes the pressure range in which both direct and...

  • X-ray diffraction in the pulsed laser heated diamond anvil cell. Goncharov, Alexander F.; Prakapenka, Vitali B.; Struzhkin, Viktor V.; Kantor, Innokenty; Rivers, Mark L.; Dalton, D. Allen // Review of Scientific Instruments;Nov2010, Vol. 81 Issue 11, p113902 

    We have developed in situ x-ray synchrotron diffraction measurements of samples heated by a pulsed laser in the diamond anvil cell at pressure up to 60 GPa. We used an electronically modulated 2-10 kHz repetition rate, 1064-1075 nm fiber laser with 1-100 μs pulse width synchronized with a...

  • Finite element analysis of resistivity measurement with van der Pauw method in a diamond anvil cell. Huang, Xiaowei; Gao, Chunxiao; Han, Yonghao; Li, Ming; He, Chunyuan; Hao, Aimin; Zhang, Dongmei; Yu, Cuiling; Zou, Guangtian; Ma, Yanzhang // Applied Physics Letters;6/11/2007, Vol. 90 Issue 24, p242102 

    Using finite element analysis, the authors studied the steady current field distribution under the configuration of van der Pauw method [L. J. van der Pauw, Philips Tech. Rev. 20, 220 (1958)] for resistivity measurement in a diamond anvil cell. Based on the theoretical analysis, the authors...

  • Finite element analysis of resistivity measurement with four point probe in a diamond anvil cell. Huang, Xiaowei; Gao, Chunxiao; Li, Ming; He, Chunyuan; Hao, Aimin; Zhang, Dongmei; Yu, Cuiling; Wang, Yue; Sang, Chong; Cui, Xiaoyan; Zou, Guangtian // Journal of Applied Physics;3/15/2007, Vol. 101 Issue 6, p064904 

    Using finite element analysis, we studied the steady current field distribution under the configuration of four point probe method for resistivity measurement in a diamond anvil cell (DAC). Based on the theoretical analysis, we made a correction to the formula by Valdes [L. B. Valdes, Proc IRE,...

  • Finite element analysis of the effect of electrode resistivity on resistivity measurement in a diamond anvil cell. Huang, Xiaowei; Gao, Chunxiao; Zhang, Dongmei; Li, Ming; He, Chunyuan; Hao, Aimin; Yu, Cuiling; Sang, Chong; Liu, Cailong; Wang, Yue; Guan, Rui; Li, Dongmei; Zou, Guangtian; Ma, Yanzhang // Applied Physics Letters;5/14/2007, Vol. 90 Issue 20, p204102 

    The effect of electrode resistivity on the in situ resistivity measurement in a diamond anvil cell was studied using finite element analysis. The theoretical analysis reveals that the origin of significant error for a thin sample is mainly caused by the resistivity difference between the...

  • Plastic flow under compression and shear in rotational diamond anvil cell: Finite-element study. Levitas, Valery I.; Zarechnyy, Oleg M. // Applied Physics Letters;10/1/2007, Vol. 91 Issue 14, p141919 

    Plastic flow and the evolution of distribution of the components of stress tensor in a sample under compression and shear in rotational diamond anvil cell are studied using the finite-element method (FEM). Pressure self-multiplication effect is revealed during rotation of an anvil after...

  • Finite element analysis of the effect of electrodes placement on accurate resistivity measurement in a diamond anvil cell with van der Pauw technique. Wu, Baojia; Huang, Xiaowei; Han, Yonghao; Gao, Chunxiao; Peng, Gang; Liu, Cailong; Wang, Yue; Cui, Xiaoyan; Zou, Guangtian // Journal of Applied Physics;Jun2010, Vol. 107 Issue 10, p104903 

    The van der Pauw technique is widely used to determine resistivity of materials. In diamond anvil cell the compressed sample will make the contact placement change under high pressure. Using finite element analysis, we study the effect of contact placement error induced by pressure on the...

  • Pressure distribution in a quasi-hydrostatic pressure medium: A finite element analysis. Tempere, Jacques; Silvera, Isaac F. // Journal of Applied Physics;Dec2011, Vol. 110 Issue 11, p113523 

    The highest quality pressures on samples in a diamond anvil cell (DAC) at high pressures are produced using quasi-hydrostatic pressurization media such as helium or hydrogen. In this paper we carry out a finite element analysis of pressure distributions in a DAC using helium and non-hydrostatic...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics