33.6 T dc magnetic field produced in a hybrid magnet with Ho pole pieces

Rubin, L. G.; Brandt, B. L.; Weggel, R. J.; Foner, S.; McNiff, E. J.
July 1986
Applied Physics Letters;7/7/1986, Vol. 49 Issue 1, p49
Academic Journal
A dc magnetic field of 33.6±0.3 T was produced in a hybrid magnet whose central field was enhanced by a 3.5 T contribution from holmium pole pieces. The working (sample) volume was a 2-mm gap between the 19-mm-diam×32-mm-long pole pieces tapered to 12-mm-diam faces. The magnetic field was measured with high-field/low-temperature Hall-effect sensors whose reproducibility and linearity made practical an extrapolation technique for fields above 30 T. Three superconducting samples with previously measured upper critical fields were used as calibration check points.


Related Articles

  • Measurement of the Hall coefficient using van der Pauw method without magnetic field reversal. Levy, Miguel; Sarachik, M. P. // Review of Scientific Instruments;Jul1989, Vol. 60 Issue 7, p1342 

    The van der Pauw geometry has been widely used for the measurement of resistivities and Hail coefficients. Although the measurement of a Hail coefficient requires a finite magnetic field, it should be noted that van der Pauw's expression is valid only in the limit of zero field; in addition to...

  • On-wafer Hall-effect measurement system. Mumford, P. D.; Look, D. C. // Review of Scientific Instruments;Jun91, Vol. 62 Issue 6, p1666 

    A novel system capable of making on-wafer Hall-effect measurements of a patterned wafer during the fabrication sequence has been developed. A flat, powerful rare-earth magnet provides the magnetic field required. The wafer need only have van der Pauw patterns available for on-wafer measurement...

  • What do you measure when you measure the Hall effect? Koon, D. W.; Knickerbocker, C. J. // Review of Scientific Instruments;Feb1993, Vol. 64 Issue 2, p510 

    A formalism for calculating the sensitivity of Hall measurements to local inhomogeneities of the sample material or the magnetic field is developed. This Hall weighting function g(x,y) is calculated for various placements of current and voltage probes on square and circular laminar samples....

  • Investigation of the magnetic structure of holmium by the muonic method. Krivosheev, I. A.; Nezhivoı, B. A. Nikol’skiı, A. A.; Ponomarev, A. N.; Duginov, V. N.; Ol’shevskiı, V. G.; Pomyakushin, V. Yu. // JETP Letters;1/10/97, Vol. 65 Issue 1, p81 

    The possibility of investigating by the muonic method spin-incommensurate helicoidal structures of rare-earth magnets is examined for the example of holmium. It is shown that at temperatures 20 K

  • Investigation of the helimagnetic phases of holmium in a c-axis magnetic field. Tindall, D. A.; Steinitz, M. O.; Kahrizi, M.; Noakes, D. R.; Ali, N. // Journal of Applied Physics;4/15/1991, Vol. 69 Issue 8, p5691 

    Presents a study which investigated the helimagnetic phases of holmium in a c-axis magnetic field. Information on the basic antiferromagnetic structure of holmium; Results of the neutron diffraction measurements; Details of the thermal expansivity measurements.

  • High pulsed field magnetostriction in Ho2Fe17 single crystal. García-Landa, B.; Algarabel, P. A.; Ibarra, M. R.; Kayzel, F. E.; Anh, T. H.; Franse, J. J. M. // Journal of Applied Physics;5/15/1993, Vol. 73 Issue 10, p6147 

    Presents a study that performed magnetostriction measurements on holmium-iron single crystals. Use of high pulsed magnetic fields; Temperature range by which the measurements were performed; Volume deformations in the basal plane.

  • Transport and optical properties of tin δ-doped GaAs structures. Kul’bachinskiı, V. A.; Kytin, V. G.; Lunin, R. A.; Mokerov, V. G.; Senichkin, A. P.; Bugaev, A. S.; Karuzskiı, A. L.; Perestoronin, A. V.; van Schaijk, R. T. F.; Visser, A. de // Semiconductors;Jul99, Vol. 33 Issue 7, p771 

    The transport and optical properties of tin δ layers in GaAs are investigated as functions of the Sn concentration. The Shubnikov-de Haas and Hall effects are measured in the temperature range 0.4-12 K in magnetic fields up to 38 T. The band diagrams and quantum mobilities of electrons in the...

  • Simple, inexpensive double ac Hall measurement system for routine semiconductor characterization. Chu, Peter; Niki, Shigeru; Roach, J. W.; Wieder, H. H. // Review of Scientific Instruments;Sep87, Vol. 58 Issue 9, p1764 

    A simple, comparatively inexpensive Hall-effect measurement apparatus is described in which the magnetic field and sample current are sine waves at different frequencies. The current for the electromagnet is obtained directly from the 60-Hz power line, providing magnetic fields ≊0.1...

  • A simple approach to the evaluation of the Hall conductivity in impure metals within the Green function formalism. Edelstein, V. M. // JETP Letters;1/25/98, Vol. 67 Issue 2, p159 

    A simple method of dealing with the Hall effect in metals with short-ranged impurities in a weak magnetic field is proposed. The method is based on a Schwinger representation for the electron Green function in the magnetic field. The efficacy of the method is demonstrated on a calculation of the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics