TITLE

Pulsed laser treatment of diamondlike carbon films

AUTHOR(S)
Prawer, S.; Kalish, R.; Adel, M.
PUB. DATE
June 1986
SOURCE
Applied Physics Letters;6/9/1986, Vol. 48 Issue 23, p1585
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Conducting (10-1 Ω cm) pathways have been directly written into an insulating (106 Ω cm) diamondlike carbon film using pulsed laser irradiation (0.53 μm). The morphological and structural changes caused by the laser suggest that the film has been transformed into a form of graphite preserving some of the diamondlike properties of the original coating.
ACCESSION #
9820066

 

Related Articles

  • Stoichiometry issues in pulsed-laser deposition of alloys grown from multicomponent targets. Arnold, C.B.; Aziz, M.J. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS23 

    Abstract. We have examined the degree of congruent transfer in pulsed-laser deposition (PLD) of alloy thin films in phases that are stable over a wide range of compositions. SiGe films were deposited by PLD onto high-purity glassy carbon substrates. We analyzed the average composition of these...

  • Wavelength dependence of the photoablation of carbon at low irradiance. Abhilasha; Dwivedi, R. K.; Thareja, R. K. // Journal of Applied Physics;6/15/1994, Vol. 75 Issue 12, p8237 

    Reports on the wavelength dependence of the photoablation of carbon at low irradiance in the presence of helium gas. Estimation of the vibrational temperature of the molecular species; Discussion on pulsed-laser deposition (PLD) as a method for preparing thin films; Advantages of PLD technique.

  • Antimicrobial Properties of Diamond-like Carbon-Silver-Platinum Nanocomposite Thin Films. Narayan, R. J.; Abernathy, H.; Riester, L.; Berry, C. J.; Brigmon, R. // Journal of Materials Engineering & Performance;Aug2005, Vol. 14 Issue 4, p435 

    Silver and platinum were incorporated within diamond-like carbon (DLC) thin films using a multicomponent target pulsed laser deposition process. Transmission electron microscopy of the DLC-silver and DLC-platinum composite films reveals that these films self-assemble into particulate...

  • Influence of a magnetic field on deposition of diamond-like carbon films. Hou, Q.R.; Gao, J. // Applied Physics A: Materials Science & Processing;1998, Vol. 67 Issue 4, p417 

    Abstract. A magnetic field was incorporated into pulsed laser deposition of diamond-like carbon films. Due to the collision of neutral carbon atoms with energized electrons in the plume, more carbon ions were generated. As a result, the hardness of the diamond-like carbon films was increased in...

  • Pulsed laser deposition of carbon nitride films by a sub-ps laser. Geretovszky, Z.; Kántor, Z.; Bertóti, I.; Szörényi, T. // Applied Physics A: Materials Science & Processing;2000, Vol. 70 Issue 1, p9 

    Abstract. CN[sub x] (0.01 < x < 0.06) films were grown from a graphite target by pulsed laser deposition in a low-pressure nitrogen environment at room temperature, using a sub-ps ultraviolet laser. With increasing nitrogen pressure from 3 x 10[sup -2] to 0.6 mbar the nitrogen content of the...

  • Preparation of amorphous CNx thin films by pulsed laser deposition using a radio frequency radical.. Aoi, Yoshifumi; Ono, Kojiro // Journal of Applied Physics;8/15/1999, Vol. 86 Issue 4, p2318 

    Presents information on a study which investigated the effects of nitrogen pressure in the pulsed laser deposition chamber and radio frequency input power during the operation of the radical beam source on carbon nitride thin film characteristics. Methodology of the study; Results and discussion...

  • Adjusting chemical bonding of hard amorphous CSi[sub x] N[sub y] thin films by N[sup *] -plasma-assisted pulsed laser deposition. Thärigen, T.; Lorenz, M.; Koivusaari, K.J.; Streubel, P.; Hesse, R.; Szargan, R. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS899 

    Abstract. Hard amorphous carbon silicon nitride thin films have been grown by pulsed laser deposition (PLD) of various carbon silicon nitride targets by using an additional nitrogen RF plasma source on [100] oriented silicon substrates at room temperature. The influence of the number of laser...

  • SÍNTESIS DE BICAPAS NANOESTRUCTURADAS DE DLC/BN SOBRE SUSTRATOS DE SI/SI3N4 MEDIANTE DEPOSICIÓN DE LÁSER PULSADO. Román, Wilson S.; Riascos, Henry; Caicedo, Julio C.; Gómez, Jose F.; Ospina, Rogelio // La Revista Latinoamericana de Metalurgia y Materiales, RLMM;2012, Vol. 32 Issue 1, p30 

    The Diamond like carbon and boron nitride (DLC/BN) bilayer thin films were deposited onto silicon and nitride silicon substrates (100), by pulsed laser deposition system (PLD). The deposition was conducted with Nd:YAG laser with a wavelength of 1064 nm. The growth of bilayer was carried out...

  • EFECTO DEL GAS DE NITROGENO SOBRE LOS ENLACES QUIMICOS DE LAS PELICULAS DELGADAS DE CNx SINTETIZADAS POR ABLACION LASER. Riascos, H.; Zambrano, G.; Prieto, P.; Camps, E. // Revista Colombiana de Física;2007, Vol. 39 Issue 2, p437 

    Carbon Nitride (CNx) thin films were deposited from a graphite target in nitrogen atmosphere on silicon substrates at a temperature of 300 °C by Pulsed Laser Deposition (PLD) technique at fluences of 2 and 10 J/cm², and at a gas pressure between 1 and 50 mTorr. The influence of deposition...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics