TITLE

Response to ‘‘Comment on ‘Domain inversion effects in Ti-LiNbO3 integrated optical devices’ ’’ [Appl. Phys. Lett. 48, 1104 (1986)]

AUTHOR(S)
Miyazawa, Shintaro
PUB. DATE
April 1986
SOURCE
Applied Physics Letters;4/21/1986, Vol. 48 Issue 16, p1104
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Focuses on the domain inversion effects on titanium-lithium niobate integrated optical devices. Total surface inversion; Impurity concentration gradient; Spontaneous polarization.
ACCESSION #
9819577

 

Related Articles

  • Comment on ‘‘Domain inversion effects in Ti-LiNbO3 integrated optical devices’’ [Appl. Phys. Lett. 46, 933 (1985)]. Peuzin, J. C. // Applied Physics Letters;4/21/1986, Vol. 48 Issue 16, p1104 

    Focuses on the domain inversion effects on titanium-lithium niobate integrated optical devices. Poling mechanism; Total surface inversion; Spontaneous polarization.

  • Profile of titanium lines produced by excimer laser direct writing on lithium niobate. Lavoie, C.; Meunier, M.; Boivin, S.; Izquierdo, R.; Desjardins, P. // Journal of Applied Physics;8/15/1991, Vol. 70 Issue 4, p2343 

    Presents a study which investigated the profile of titanium lines produced by KrF excimer laser direct writing on lithium niobate in detail since it is critical in the fabrication of titanium in-diffused lithium niobate optical waveguides. Methodology; Results of the study; Conclusion.

  • Direct laser indiffusion of Ti into LiNbO3 single crystals. Bertolotti, M.; Rossi, M.; Ferrari, A.; Craciun, V.; Mihailescu, I. N.; Ursu, I.; Mikhailova, G. N.; Dhaul, A.; Chander, R. // Journal of Applied Physics;6/15/1992, Vol. 71 Issue 12, p5888 

    Provides information on a study which presented the indiffusion of titanium into single-crystalline lithium niobate substrates as a result of high-intensity ruby laser irradiation of lithium niobate samples coated with films of titanium of 400 angstrom thickness. Methodology of the study;...

  • Microwave integrated optical modulator. Cross, Peter S.; Baumgartner, Richard A.; Kolner, Brian H. // Applied Physics Letters;1984, Vol. 44 Issue 5, p486 

    A Ti-diffused lithium niobate, traveling wave modulator has been fabricated and tested at microwave frequencies. A Mach-Zehnder interferometer optical configuration and a coplanar waveguide electrical transmission line are used. For a 4-mm interaction length, the modulator has a 3-dB bandwidth...

  • Evanescent coupling in arrays of type II femtosecond laser-written waveguides in bulk x-cut lithium niobate. Heinrich, Matthias; Szameit, Alexander; Dreisow, Felix; Döring, Sven; Thomas, Jens; Nolte, Stefan; Tünnermann, Andreas; Ancona, Antonio // Applied Physics Letters;9/8/2008, Vol. 93 Issue 10, p101111 

    We report on the first fabrication of evanescently coupled planar arrays of type II waveguides in x-cut lithium niobate (LiNbO3) by femtosecond laser inscription. A particular choice of writing parameters allows the evanescent field of the individual waveguide modes to extend significantly...

  • Long-range surface plasmon-polariton mode cutoff and radiation in embedded strip waveguides. Breukelaar, Ian; Charbonneau, Robert; Berini, Pierre // Journal of Applied Physics;8/15/2006, Vol. 100 Issue 4, p043104 

    Using a fully vectorial formulation, the normal mode analysis method is used to model the radiative spreading of surface plasmon-polariton mode input into regions where the bound surface mode is cut off or radiative. The analysis was performed at λ0=1.55 μm for embedded finite width strip...

  • Planar optical waveguide formation in LiNbO3 by means of high energy ion implantation. Nesprías, F.; Debray, M. E.; Fischer, M.; Lamagna, A.; Kreiner, A. J.; Davidson, M.; Davidson, J.; Redelico, G.; Burlón, A.; Murruni, L.; Minsky, D.; Somacal, H. // AIP Conference Proceedings;2007, Vol. 884 Issue 1, p489 

    The article presents information about the process for production of planar optical waveguide in LiNbO3 through high energy ion implantation. Several methods have been developed through diffusion, ionic exchange and ionic implantation to produce LiNbO3 waveguides. Lithium niobate is a crystal...

  • Pyroelectric effects in LiNbO3 channel-waveguide devices. Bulmer, C. H.; Burns, W. K.; Hiser, S. C. // Applied Physics Letters;4/21/1986, Vol. 48 Issue 16, p1036 

    The thermal stability of Ti-indiffused LiNbO3 channel-waveguide devices is described. In Z-cut interferometers the pyroelectric effect causes large output instabilities. However, both Z-cut directional couplers and X-cut interferometers show good thermal stability. We discuss the pyroelectric...

  • Wavelength dependence of photorefractive effect in Ti-indiffused LiNbO3 waveguides. Fujiwara, T.; Sato, S.; Mori, H. // Applied Physics Letters;3/13/1989, Vol. 54 Issue 11, p975 

    A novel method of measuring the photorefractive sensitivity of Ti-diffused channel waveguides in lithium niobate is proposed and demonstrated. It is suited for quantifying the dependence of the photorefractive sensitivity on the irradiation beam wavelength. From measurements at various...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics