TITLE

Microbubble skin friction reduction on an axisymmetric body under the influence of applied axial pressure gradients

AUTHOR(S)
Clark, H.; Deutsch, S.
PUB. DATE
December 1991
SOURCE
Physics of Fluids A;Dec91, Vol. 3 Issue 12, p2948
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The influence of both a favorable and an adverse applied axial pressure gradient on microbubble-induced skin friction reduction was examined. An 87 mm diameter, 632 mm long model equipped with a 273 mm long cylindrical force balance was employed. Experiments were carried out in a 305 mm diameter water tunnel, at free-stream speeds of 4.6, 7.6, 10.7, 13.7, and 16.8 m/sec. Air was injected at rates as high as 12×10-3 m3/sec. Measurement of the static pressure along the body with gas injection demonstrated that gas injection did not alter the pressure gradient and that the flow remained axisymmetric. Reductions in skin friction for the zero pressure gradient case agreed well with the earlier results of Deutsch and Castano [Phys. Fluids 29, 3590 (1986)]. The adverse-gradient-induced separation of the boundary layer for speeds at and above 7.6 m/sec, for air injection rates in excess of 5.0×10-3 m3/sec. The favorable gradient strongly inhibited the drag reduction mechanism [47].
ACCESSION #
9788017

 

Related Articles

  • No rise in compressor sales for two years.  // Professional Engineering;11/03/99, Vol. 12 Issue 20, p12 

    Predicts the continuation of the downward trend in compressor sales in Great Britain. Decline of engineering output in 1999; Anticipated rate of depression of demand for axial compressors.

  • Development of key components and technologies for a high repetition rate and high-power excimer laser Goto, Tatsumi; Takagi, Shigeyuki; Kakizaki, Kouji; Saton, Saburoh; Kosugi, Shinichiro; Ohishi, Takashi; Kanazawa, Yukio; Ishii, Akira; Teranishi, Tsuneharu; Yasuoka, Koichi; Shinohe, Takashi; Ohashi, Hiromichi; Endo, Fumihiko; Okamura, Katsuya // Review of Scientific Instruments;Jan1998, Vol. 69 Issue 1, p1 

    Develops the key components and technologies for a xenon chloride excimer laser. Fabrication of a compact axial blower; Creation of x-ray tube for laser preionization.

  • Packaged engines teach real IC technology.  // Professional Engineering;11/29/2000, Vol. 13 Issue 22, p56 

    Introduces a miniature axial-flow gas turbine with test stand from Armfield. Chance for universities and researchers to use packaged engines in the teaching of integrated circuit engine design and manufacture; Measurement of cylinder pressures and temperatures in real-time.

  • Inertial Manifolds and Gevrey Regularity for the Moore-Greitzer Model of an Axial-Flow Compressor. Chung, Y.; Titi, E. S. // Journal of Nonlinear Science;Jan/Feb2003, Vol. 13 Issue 1, p1 

    Studies inertial manifolds and Gevrey regularity for the Moore-Greitzer model of an axial-flow compressor. Global invariant inertial manifold in the system of evolution equations; Ordinary differential system; Reliability of the Galerkin method.

  • Expanded Triaxial Force.  // Product Design & Development;Jul/Aug2010, Vol. 65 Issue 6, p33 

    The article evaluates the 3-component triaxial force link with expanded measurement capabilities from Kistler Instrument Corp.

  • Experimental study of axial flow in a vortex ring. Naitoh, Takashi; Fukuda, Naohiko; Gotoh, Toshiyuki; Yamada, Hideo; Nakajima, Kei // Physics of Fluids;Jan2002, Vol. 14 Issue 1, p143 

    For a vortex ring at Re=1600, it was found that two types of azimuthal flow (axial flow) exist inside the vortex tube. The axial flow appears when the amplitude of a wavy deformation of the vortex ring becomes appreciable. The axial flow starts to grow before the wave-breaking and its speed...

  • Analysis on the local structures for 3d1 impurities (Ti3+ and V4+) in KTiPO4. Ding, C. C.; Wu, S. Y.; Zhang, L. J.; Xu, Y. Q.; Zhang, Z. H.; Wu, M. H.; Teng, B. H. // Magnetic Resonance in Chemistry;Jan2018, Vol. 56 Issue 1, p25 

    Making use of the perturbation formulae for 3d1 ions (Ti3+ and V4+) under orthorhombically compressed octahedra, the spin Hamiltonian parameters (g factors: gx, gy, gz and hyperfine structure constants: Ax, Ay, Az) and local structures of the 3d1 impurity centres C1, C2, and C3 in KTiOPO4...

  • Stall prediction of in-flight compressor due to flamming of refueling leakage near inlet. Liu, N.; Ng, E. Y.-K.; Lim, H. N.; Tan, T. L. // Computational Mechanics;Apr2003, Vol. 30 Issue 5/6, p479 

    The propagation of strong distortion at inlet of an axial compressor is investigated by applying the critical distortion line and the integral method. The practical applications, such as the inlet conditions of flaming of leakage fuel during mid-air refueling process, are implemented to show the...

  • The stability of the narrow-gap Taylor-Couette system with an axial flow. Chang, M.H.; Chen, C.K. // Acta Mechanica;2002, Vol. 156 Issue 3/4, p131 

    The stability of viscous flow between concentric rotating cylinders with an axial flow due to an axial pressure gradient is considered. The governing equations with respect to three-dimensional disturbances are derived and solved by a direct numerical procedure. Results are given for the case of...

Share

Read the Article

Courtesy of

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics