TITLE

Process Based Conditional Maintanence (PBCM) for Multistage Production Systems

AUTHOR(S)
Lakshmi, R. Prasanna; Raja, P. Nelson; Narayanasamy, Jaiguru
PUB. DATE
June 2014
SOURCE
Australian Journal of Basic & Applied Sciences;Jun2014, Vol. 8 Issue 9, p201
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Background: In this paper a concept of PROCESS BASED CONDITIONAL MAINTANENCE (PBCM) is introduced which minimizes this time gap between preventive scheduled maintenance and machine utilization. When this system is integrated with ERP then a smooth flow of preventive maintenance can be achieved. Analytical Hierarchy Process (AHP) is linked with this method to have a decision-aid on PBCM. The idea of the proposed model is to have control over preventive maintenance through process and to minimize the cost incurred in the machines which are not in use. Objective: Process Based Conditional Maintenance (PBCM) methodology calculates this delay time and requirements to find an optimum approach to sequence the preventive maintenance for machines. These problems shall be often found in the areas of fabrication and especially in boiler component manufacturing companies. Results: While considering a boiler component process as a study, it has been noted that the frequency deviation between conventional Preventive maintenance and PBCM is not more but PBCM confirms that all the machines are more conditionally maintained for adjacent processes which in turn reduces hidden process cost. Conclusion: In this paper, only single component of Waterwall is taken into consideration. That is why this process seems to be somewhat simpler. But when PBCM is implemented for all components then it predicted to be more complicated. At that stage there always comes a situation of same machine allotted for several processes. At this critical decision making situation, we utilize AHP as decision making tool and decide which machine to allocate for which process. This shall be next stage of this research work where many brain storming with exerts and hurdle regarding the process control.
ACCESSION #
97368417

 

Related Articles

  • Comparison of Fuzzy and Crisp Versions of an AHP and TOPSIS Model for Nontraditional Manufacturing Process Ranking Decision. Yurdakul, Mustafa; İç, Yusuf Tansel // Journal of Advanced Manufacturing Systems;Jun2019, Vol. 18 Issue 2, p167 

    Nontraditional manufacturing processes (NTMPs) are especially preferred when it is necessary to machine very small and delicate parts, obtain complex shapes or process very hard and high strength materials. New NTMPs are developed continually and the total number of NTMPs being used in the...

  • Multiple Criteria Decision Making Technique in New Product Development Management. Mamaghani, Alireza // Journal of Management Research;Jul2012, Vol. 4 Issue 3, p81 

    Although New Product Development Management (NPDM) is a new successful, challengeable and important strategy in modern companies, understanding the key success factors in this approach is not only helpful, but also productive in reducing managerial decision-making risks. In this paper, after...

  • Selecting a Material for an Electroplating Process Using AHP and VIKOR Multi Attribute Decision Making Method. Kaoser, Md. Masud; Rashid, Md. Mamunur; Ahmed, Sharif // Proceedings of the International Conference on Industrial Engine;2014, p834 

    In this era of Industrialization every company is trying to develop their manufacturing process better and better. Electroplating is one of the important processes in manufacturing company like automobile, ship, airspace, machinery, electronics, jewelry, defense, toy industries, etc. It is...

  • A Comparative Holistic Fuzzy Approach for Evaluation of the Chain Performance of Suppliers. Eraslan, Ergün; Atalay, Kumru Didem // Journal of Applied Mathematics;2014, p1 

    The competition between the companies in the dynamic market conditions has made the Supply Chain Management (SCM) a more important issue. The companies which have organized their supply chain effectively have obtained more flexibility in their manufacturing processes in addition to delivery of...

  • Penentuan Kriteria Pemilihan Strategi Sistem Manufaktur Menggunakan Analytic Hierarchy Process. Soepardi, Apriani; Puryani; Chaeron, Mochammad; Anggraini, Isti // Jurnal Teknik Industri;des2012, Vol. 14 Issue 2, p107 

    This paper presents the decision making process for the selection of criteria manufacturing system using AHP. The accuracy of the selection strategy is based on many criteria that termed as agility capabilities. Several influential criteria that is used in the selection are responsiveness,...

  • An integrated design methodology based on the use of group AHP-DEA approach for measuring lean tools efficiency with undesirable output. Anvari, Alireza; Zulkifli, Norzima; Sorooshian, Shahryar; Boyerhassani, Omid // International Journal of Advanced Manufacturing Technology;Feb2014, Vol. 70 Issue 9-12, p2169 

    The selection of lean tools is one of the crucial factors for decision makers and practitioners in a competitive environment. A few efforts have been made based on problem selection. Conversely, numerical studies have been done on analytical hierarchy process (AHP)-data envelopment analysis...

  • Detecting trouble early with CBM. Kurfess, Thomas R. // Control Engineering;Jul2007, Vol. 54 Issue 7, p36 

    The author reflects on the benefits of condition based maintenance (CBM) as a significant time and money saver across a broad spectrum of industrial applications. He describes two ways to successfully maintain machines used in a bearing production facility including having a number of...

  • A combined analytical hierarchical process (AHP) and Taguchi experimental design (TED) for plastic injection molding process settings. AlKaabneh, Faisal; Barghash, Mahmoud; Mishael, Ibrahim // International Journal of Advanced Manufacturing Technology;May2013, Vol. 66 Issue 5-8, p679 

    Injection molding process is without doubt a multi-objective process if processing time, productivity, effectiveness, and the multi-criteria quality of the product are taken into consideration. Process settings affect the degree by which these objectives are realized. This work suggests a new...

  • Application of AHP and Taguchi loss functions in evaluation of advanced manufacturing technologies. Ordoobadi, Sharon // International Journal of Advanced Manufacturing Technology;Aug2013, Vol. 67 Issue 9-12, p2593 

    The purpose of this study is to develop the decision model to help decision makers with their technology selection. Evaluation and selection of a new technology is a multi-criteria decision-making process encompassing various tangible and intangible factors. Thus, these factors should be...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics