TITLE

Surface Roughness Optimization of Brass Reinforced Epoxy Composite Using CNC Milling Process

AUTHOR(S)
Ahmadi, Naeim E.; Gohari, Ali; Zare, Ali
PUB. DATE
June 2014
SOURCE
Australian Journal of Basic & Applied Sciences;Jun2014, Vol. 8 Issue 9, p195
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper attempts to optimize the effect of cutting parameters on surface roughness of brass reinforced epoxy composite in CNC milling process. Practically, in milling operation, cutting parameters such as feedrate, spindle speed and depth of cut have greater effect on surface roughness. In this experiment, each parameter is determined by two machining levels. Thus, roughness analysis is carried out based on the L-4(23) Taguchi orthogonal array. Then, the effect of cutting parameters on surface roughness is evaluated by analysis of variance and also the optimal mixed-level array of the parameters is determined by using signal to noise ratio.
ACCESSION #
97368416

 

Related Articles

  • Optimization of Cutting Parameters to Minimize the Surface Roughness in the End Milling Process Using the Taguchi Method. Ribeiro, João; Lopes, Hernâni; Queijo, Luis; Figueiredo, Daniel // Periodica Polytechnica: Mechanical Engineering;2017, Vol. 61 Issue 1, p30 

    This paper presents a study of the Taguchi design application to optimize surface quality in a CNC end milling operation. The present study includes feed per tooth, cutting speed and radial depth of cut as control factors. An orthogonal array of L9 was used and the ANOVA analyses were carried...

  • TURNING PARAMETER OPTIMIZATION FOR SURFACE ROUGHNESS OF ASTM A242 TYPE-1 ALLOYS STEEL BY TAGUCHI METHOD. Verma, Jitendra; Agrawal, Pankaj; Bajpai, Lokesh // International Journal of Advances in Engineering & Technology;Mar2012, Vol. 3 Issue 1, p255 

    The purpose of this research paper is focused on the analysis of optimum cutting conditions to get lowest surface roughness in turning ASTM A242 Type-1 ALLOYS STEEL by Taguchi method. Experiment was designed using Taguchi method and 9 experiments were conducted by this process. The results are...

  • Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions. Eker, Beril; Ekici, Bülent; Kurt, Mustafa; Bakır, Barkın // Mechanika;2014, Vol. 20 Issue 3, p310 

    In this study, MQL turning performance was compared to dry conditions. The magnesium based material will be formed by applying the orthogonal cutting. The CNC Lathe shall be used for both cutting processes. The experiment used MINITAB 16 software to establish the experiment plan. In this study,...

  • ANALYSIS OF SURFACE ROUGHNESS IN HARD TURNING BY USING TAGUCHI METHOD. SALVI, S. B.; DESHMUKH, R. R.; DESHMUKH, S. D. // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p365 

    Hard turning is defined as the turning of hardened ferrous metals with Rockwell-C hardness ratings ranging from 45 to 70. Hard turning has the potential to reduce production costs by replacing more costly and less agile grinding operations on hard materials especially in finishing processes...

  • Application of Taguchi Method Machining to CuA1. Ibrahim, M. R.; Abdullah, Aznizam; Kadir, A.R Ab; Sulaiman, S. // Applied Mechanics & Materials;2015, Vol. 789-790, p111 

    This paper is to study the application of Taguchi Method when experimental cutting on Copper (CuA1) generated by a milling machine. The respone of this study is surface roughness while machining with varying machining parameters such as cutting speed, feed rate and depth of cut. This experiment...

  • FORECASTING OF OPTIMUM TURNING PARAMETER ON SURFACE ROUGHNESS IN TURNING OF AL-AL2O3 METAL MATRIX COMPOSITE. SINGH, YASHVIR; SINGH, NISHANT KUMAR; SINGLA, AMNEESH; LOHANI, NITIN // International Journal of Engineering Science & Technology;Feb2013, Vol. 5 Issue 2, p267 

    The objective of this research work is to apply taguchi method to investigate the effects of turning parameters such as cutting speed, depth of cut and feed rate on surface roughness, in Turning of Al-Al2O3 MMC using TiC coated HSS cutting tool. The Signal-to- Noise (S/N) ratio, the analysis of...

  • Tool Wear Optimization for General CNC Turning Using Fuzzy Deduction. Tian-Syung Lan // Engineering;Dec2010, Vol. 2 Issue 12, p1019 

    Tool wear is frequently considered in the modern CNC (computer numerical control) turning industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances, or achieved through numerous equipment operations. Therefore, a...

  • Multi-response optimization of machining parameters in hot turning using grey analysis. Ranganathan, S.; Senthilvelan, T. // International Journal of Advanced Manufacturing Technology;Sep2011, Vol. 56 Issue 5-8, p455 

    This paper envisages the multi-response optimization of machining parameters in hot turning of stainless steel (type 316) based on Taguchi technique. The workpiece heated with liquid petroleum gas flame burned with oxygen was machined under different parameters, i.e., cutting speed, feed rate,...

  • Statistical analysis of process parameters in drilling of AL/SIC metal matrix composite. Tosun, Gül // International Journal of Advanced Manufacturing Technology;Jul2011, Vol. 55 Issue 5-8, p477 

    This paper presents a statistical analysis of process parameters for surface roughness in drilling of Al/SiCp metal matrix composite. The experimental studies were conducted under varying spindle speed, feed rate, drill type, point angle of drill, and heat treatment. The settings of drilling...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics