Going fast with `conventional' equipment

Vasilash, Gary S.
December 1997
Automotive Manufacturing & Production;Dec97, Vol. 109 Issue 12, p60
Trade Publication
Highlights the company Lamb Technicon and its product the Mach I machine. Difference of Mach I from other high speed machines; Analysis of Lamb Technicon about spindle speeds; Lamb Technicon's considerations on the type of machining process to use; Concern on the correlation between spindle speeds and tool life.


Related Articles

  • Fast and light. Piscopo, Steve; Mesa, Peter // T & P: Tooling & Production;Dec2002, Vol. 68 Issue 12, p38 

    Discusses the advances in the high speed machining (HSM) technology. Use of high spindle speed; Advancement in indexable and solid cutting tools; Importance of close working relationships among software and tools supplier.

  • Behind the high-speed spindle. Popoli, Bill // T & P: Tooling & Production;May2002, Vol. 68 Issue 5, p60 

    Provides information on high-speed spindles. Description of the spindle's bearing design; Features for detecting thermal growth; Vibration as a critical factor in high-speed machining.

  • Designing spindles for high-speed machining. Hetzer, Christopher J. // Machine Design;11/07/96, Vol. 68 Issue 20, p168 

    Presents tips in designing machine spindles for high-speed machining (HSM). Spindle specifications for HSM; Control; Appropriate bearing system; Necessary sealing method.

  • High speed machining in the mix. Knabach, Marlow; Seiki, Mori; Beard, Tom // Modern Machine Shop;Jun98, Vol. 71 Issue 1, p98 

    Focuses on the merging of high speed machining and conventional machining in machine shops. Elements of mechanical machine design to consider; Information on machinery control issues; Information on machining spindles.

  • NO HIGH-SPEED SURPRISES. Benes, James // American Machinist;May2005, Vol. 149 Issue 5, p58 

    Presents information on several factors to consider in order to realize the benefits of high-speed machining. Machine tools; Selection of control or motor system; Spindles.

  • A Little Speed On The Side, Please. Koepfer, Chris // Modern Machine Shop;Aug2001, Vol. 74 Issue 3, p122 

    Deals with the decision of Dasco Engineering Corp., an aerospace component manufacturer, to apply high speed machining techniques in producing components for the retrofit of F-15 airplanes. Features of the high speed spindle used by Dasco for the F-15 contract; Results of the application.

  • An experimental investigation of spindle rotary error on high-speed machining center. Jin, Lan; Yan, Zhaoyang; Xie, Liming; Gou, Weidong; Tang, Linhu // International Journal of Advanced Manufacturing Technology;Jan2014, Vol. 70 Issue 1-4, p327 

    A method is described in this paper for measuring the spindle rotation error and a technique for separating the eccentric error caused by setup error of the master cylinder. The system consists of two non-contact capacitance sensors used to measure the radial displacement of the rotating master...

  • DYNAMIC CHARACTERISTICS ANALYSIS OF HIGH SPEED MOTORIZED SPINDLE. ABUTHAKEER, S.Syath; MOHANRAM, P. V.; Mohan KUMAR, G. // Annals of the Faculty of Engineering Hunedoara - International J;Jul-Sep2012, Vol. 10 Issue 3, p207 

    High speed machining (HSM) is a capable technology for drastically increasing productivity and reducing production costs. Development of high-speed spindle technology is strategically critical to the implementation of HSM. Compared to conventional spindles, motorized spindles are equipped with...

  • High Speed Machining Without The Fast Spindle. Zelinski, Peter // Modern Machine Shop;Oct2007, Vol. 80 Issue 5, p50 

    The article presents information on high speed machining without the fast spindle. Axial chip thinning is a way of cheating, sort of, to achieve a higher feed rate. At least it seems like cheating. Under the influence of chip thinning, the chip thickness no longer equals the advance per tooth....


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics