Tubular steel use is growing

Wrigley, Al
November 1997
Automotive Manufacturing & Production;Nov97, Vol. 109 Issue 11, p24
Trade Publication
Provides information on the increasing used of steel in tubular form in North American car and truck builder. Advantages of using tubular steel; Various applications of the steel; Two factors that dramatized the growing demands for tubular steel.


Related Articles

  • tubing.  // Medical Device Technology;May2005, Vol. 16 Issue 4, p44 

    Focuses on the manufacture of several tubing from suppliers in Great Britain. Availability of platinum-cured silicon Pumpsil tubing for pump applications, by Watson-Marlow Pumps; Citations of the typical applications for the Nitinol tubing from Euroflex GmBH; Production of ground and welded...

  • Structural Tubing Connections and Nomenclature.  // Welding Journal;Oct2006, Vol. 85 Issue 10, p142 

    The article provides information about structural tubing connections. These connections are characterized by high strength and stiffness because the holes should not be cut at intersection. When fitting tubular members for welding, the end of the branch member is contoured to the shape of the...

  • Defect Avoidance. Hardin, Winn // Vision Systems Design;Jun2010, Vol. 15 Issue 6, p13 

    The article discusses a machine-vision defect inspection system developed by PROFACTOR for voestalpine Tubulars. The need to locate defects early in the manufacturing process of seamless steel tubular products to ensure that the highest quality are produced is explained. The design of PROFACTOR...

  • Research on stress concentration at tubular joints in concrete filled steel tubular truss arch bridge. Li Rui; Ye Liao-yuan; Chen Ying // Journal of Civil Engineering & Architecture;2009, Vol. 3 Issue 3, p11 

    In this paper stresses at joints forming by hollow steel tube and concrete filled steel tube (CFST) are calculated, analyzed and compared. It is founded that the stress concentration at joints of CFST is a quite different from that of hollow steel tube. A conclusion can be made that analysis of...

  • Elliptical hollow section T and X connections. Haque, Tarana; Packer, Jeffrey A. // Canadian Journal of Civil Engineering;Aug2012, Vol. 39 Issue 8, p925 

    Elliptical hollow sections (EHS) are the newest steel shape to have emerged in the construction industry. They have been incorporated in a variety of structures around the world, including Canada, without structural design guidelines. To date, EHS are completely absent from Canadian codes and...

  • Experimental and Numerical Study on Bar-Reinforced Concrete Filled Steel Tubular Columns Under Axial Compression. Jinsheng Han; Shuping Cong // Open Civil Engineering Journal;2011, Vol. 5, p109 

    The behaviors of bar-reinforced concrete filled steel tubular columns subjected to axial load were studied. One plain concrete filled steel tubular column and three bar-reinforced concrete filled steel tubular columns were tested. The deformation of specimens and the strain of steel tubes were...

  • A Finite Element Approach to Predict the Stress Concentration Factors in Cold Formed Corners. Anis, Assad; Bjork, Timo; Heinilla, Sami // International Journal of Mechanical & Mechatronics Engineering;Aug2012, Vol. 12 Issue 4, p94 

    This paper presents the extensive investigation of stress concentration factors in cold formed steel hollow tubes made up of steel. The stress concentration in cold formed sections is due to the corner radii and notches present at inside corners of cold formed members. These investigations has...

  • Research on structural resistance and safety of tubular composite members. Kudzys, A.; Kvedaras, A. K. // Mechanika;2006, Vol. 61 Issue 5, p5 

    An advantage and application of the concrete-filled steel tubes in structural practice is discussed. An urgency to investigate the structural performance and reliability of tubular composite structures is analysed. The robustness and structural safety of a new type of tubular members of annular...

  • Node additional bending moment's influence on plane K shape steel tube tubular joint ultimate bearing capacity. Xian Liao; Jun Yong; Zhongqing Wang // Applied Mechanics & Materials;2014, Issue 578-579, p732 

    The study of the existing data and steel structure design specification on node ultimate bearing capacity is limited to simply analyze its axial bearing capacity, but the study on the ultimate bearing capacity of the additional bending moment with nodes is very deficient. This article first...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics