TITLE

Bond-slip analysis via a cohesive-zone model simulating damage, friction and interlocking

AUTHOR(S)
Serpieri, R.; Varricchio, L.; Sacco, E.; Alfano, G.
PUB. DATE
July 2014
SOURCE
Frattura e Integrita Strutturale;2014, Vol. 8, p284
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A recently proposed cohesive-zone model which effectively combines damage, friction and mechanical interlocking has been revisited and further validated by numerically simulating the pull-out test, from a concrete block, of a ribbed steel bar in the post-yield deformation range. The simulated response is in good agreement with experimental measurements of the bond slip characteristics in the post-yield range of deformed bars reported in the literature. This study highlights the main features of the model: with physically justified and relatively simple arguments, and within the sound framework of thermodynamics with internal variables, the model effectively separates the three main sources of energy dissipation, i.e. loss of adhesion, friction along flat interfaces and mechanical interlocking. This study provides further evidence that the proposed approach allows easier and physically clearer procedures for the determination of the model parameters of such three elementary mechanical behaviours, and makes possible their interpretation and measurement as separate material property, as a viable alternative to lumping these parameters into single values of the fracture energy. In particular, the proposed approach allows to consider a single value of the adhesion energy for modes I and II.
ACCESSION #
97105860

 

Related Articles

  • NURBS- and T-spline-based isogeometric cohesive zone modeling of interface debonding. Dimitri, R.; De Lorenzis, L.; Wriggers, P.; Zavarise, G. // Computational Mechanics;Aug2014, Vol. 54 Issue 2, p369 

    Cohesive zone (CZ) models have long been used by the scientific community to analyze the progressive damage of materials and interfaces. In these models, non-linear relationships between tractions and relative displacements are assumed, which dictate both the work of separation per unit fracture...

  • Fault Mechanism Analysis and Characteristic Extraction for Multi-Disc Clutch. Man Chen; Heyan Li; Biao Ma // Applied Mechanics & Materials;2014, Issue 526, p155 

    The thermo-elastic coupling model of clutch friction pair is established by the thermoelastic instability theory to acquire the basic process of friction disc warp due to hot agglomeration; according to this process, thought of reflecting initial phase clutch fault by observing the partial...

  • Editorial corner – a personal view Hard challenge with soft materials: Understanding large deformation and fracture behavior. Frontini, P. M. // Express Polymer Letters;2013, Vol. 7 Issue 12, p959 

    Thue article presents the author's view about the mechanics of soft materials. She argues that the materials display a mixture of fluid and solid properties, making them dissolve easily under mechanical loads. She notes that soft materials provide problems which are associated with the...

  • Internal Thickness Extrapolation. Töller, Felix; Löhnert, Stefan; Wriggers, Peter // PAMM: Proceedings in Applied Mathematics & Mechanics;Dec2018, Vol. 18 Issue 1, p1 

    Modeling of thin joining zones is one application of Cohesive Zone Elements (CZE). Traction Separation Laws (TSLs) used as constitutive models in most CZEs that can be found in literature cannot fully capture all damage causing deformation modes induced by forming of hybrid components. An...

  • Parallel 3-D Simulation of a Fault Gouge Using the Lattice Solid Model. Latham, Shane; Abe, Steffen; Mora, Peter // Pure & Applied Geophysics;Sep2006, Vol. 163 Issue 9, p1949 

    Despite the insight gained from 2-D particle models, and given that the dynamics of crustal faults occur in 3-D space, the question remains, how do the 3-D fault gouge dynamics differ from those in 2-D? Traditionally, 2-D modeling has been preferred over 3-D simulations because of the...

  • Spindle Housing Design Parameter Optimization Considering Thermo-Elastic Behaviour. Kim, S.-M.; Lee, S.-K. // International Journal of Advanced Manufacturing Technology;Jun2005, Vol. 25 Issue 11/12, p1061 

    This paper presents a simulation method for predicting thermo-elastic behaviours of spindle-bearing system and an optimization procedure for housing design parameters in relation to various spindle-bearing operating and surrounding conditions such as assembling tolerance, geometric dimension,...

  • On the application of kinematic models to simulate the diffusive processes of debris flows.  // Natural Hazards & Earth System Sciences;2010, Vol. 10 Issue 8, p1689 

    No abstract available.

  • Process Parameter Investigations of Backward Extrusion for Various Aluminum Shaped Section Tubes Using FEM Analysis. Orangi, S.; Abrinia, K.; Bihamta, R. // Journal of Materials Engineering & Performance;Feb2011, Vol. 20 Issue 1, p40 

    In this article, a FEM investigation has been carried out to analyze the backward extrusion of aluminum tubes which have internally and externally shaped sections. ABAQUS/Explicit finite element method was used to solve the problem. As a result, the distribution of stress, strain, and spatial...

  • BENCHMARKING OF FRICTION MODELS USED IN THE SIMULATION OF DEEP DRAWING. EVIN, Emil; TOMÁŠ, Miroslav; VÝROSTEK, Marek // Electronic Journal of Environmental Sciences;2013, Vol. 6, p129 

    Due to nature of the actual deformation process that taking place in each individual region of deep drawing it is important to define different values of friction coefficients in different regions at FEM modelling of sheet metal stamping processes. In this contribution analytical models for...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics