TITLE

Converter ignores power---supply variations

AUTHOR(S)
Kerem, Samuel
PUB. DATE
February 1996
SOURCE
EDN;02/15/96 Supplement, Vol. 41 Issue 4, p7
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Looks at the period-to-frequency converter which uses a dual-slop ADC (IC2) to drive a 3.5-digit display. Examination of how the system operates; Information on a diagram provided; Mathematical information provided.
ACCESSION #
9709051726

 

Related Articles

  • Fractional binary-to-BCD converter. Hannon Jr, John T. . // Electronic Design;10/3/94, Vol. 42 Issue 20, Engineering Software pES35 

    Presents a software routine, in 8051 assembler code, which converts a fractional eight-bit binary word into equivalent fractional four-digit (two-byte) binary code decimal (BCD) word. Process of conversion.

  • 900-MHz down converter consumes little power. Mancini, Ronald; Matarazzo, Raphael // EDN;6/22/95, Vol. 40 Issue 13, p60 

    Presents a design for a 900-MHz down converter which consumes little power. Gilbert cells as the heart of design; Voltage bias network; Requirement for components for the converter.

  • Wide-bandwidth V-F converter. Riendeau, Michael H. // Electronic Design;10/24/96 Supplement Design, Vol. 44 Issue 22, p26 

    Features the electronic circuit design for a wide-bandwidth voltage-to-frequency converter (VFC). Operating principles; Functions and capabilities; Schematic diagram; Integrated circuits used; Suggestions.

  • Voltage converters. Marston, Ray // Electronics Now;Apr95, Vol. 66 Issue 4, p42 

    Explains the design of different low power electronic voltage converters. Low-voltage generation; High-voltage generation; Complementary metal oxide semiconductor (CMOS) voltage converter; Do's and don'ts for reliable device operation; Practical ICL7660 circuits; Output frequency change.

  • 5V supply derives power from three-wire RS-232C port. Wettroth, John; Travis, Bill // EDN;10/26/95, Vol. 40 Issue 22, p106 

    Details the design of a switched-capacitor, charge-pump-voltage converter which produces a semiregulated five-volt output from an RS-232C port. Doubler configuration in which the normal input-voltage polarity is reversed; Connection of a negative input between OUT and GND; Doubling of the...

  • 900 MHz down converter consumes little power. Mancini, Ronald; Matarazzo, Raphael // EDN;02/15/96 Supplement, Vol. 41 Issue 4, p81 

    Presents information on an electronic circuit design called the down converter, which is nonproprietary and suits battery-powered applications. Features of the down converter; Advantages of this design; Examination of the circuit.

  • Converter ignores power-supply variations. Kerem, Samuel; Small, Charles H. // EDN;1/5/95, Vol. 40 Issue 1, p128 

    Describes the design of a converter which ignores power-supply variations. Pulse duration as a major source of nonlinearity; Integrator-output signal.

  • Generate auxiliary bias for LCD. Wettroth, John // Electronic Design;11/04/96, Vol. 44 Issue 23, p112 

    Describes the design of a single-cell boost converter that can generate two supply voltages commonly needed in pagers and other portable instruments with small, graphic liquid crystal displays. Main 3.3-volt supply provided by a boost converter (IC1) operating in its standard configuration;...

  • What to know about converters and their effect on harmonies--Part I. Wagner, Ray // EC&M Electrical Construction & Maintenance;Mar1997, Vol. 96 Issue 3, p16 

    Discusses the possible defects and design flaws of converters. Includes overheating and failure; Harmonics-power table for converters; Balancing power; 6-pulse conversion; Removing harmonic interaction; Torque fight; Motor inability to provide required work.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics