When the going gets tough...products for harsh environments

August 1996
EDN;8/15/96, Vol. 41 Issue 17, p53
Trade Publication
Provides a list of various electronics equipment and supplies designed for harsh environments. Includes IN Lite Mil-Spec PC; IMX7 family of converters; 8i 80-column printer; SRAM chip; HulaBook OEM kit; Model RAD128; MX1553-2 MXbus module; Industrial Mouse; Three-voltage-controlled crystal oscillators.


Related Articles

  • Needed: System-level design tools for more structured design practices. Fetter, Ryan // Electronic Design;09/01/98, Vol. 46 Issue 20, p42 

    Examines the importance of system-level design tools for the development of a structured methodology in electronic design. Common problems encountered in the electronic design process; Issues involved in electronic design; Design requirements for hardware and software architectures.

  • System design news.  // Electronic Design;12/16/94, Vol. 42 Issue 26, p126 

    Reports on developments concerning electronics design as of December 16, 1994. Rainbow Technologies Inc.'s software-protection scheme; Micrel Inc.'s MIC2561 power supply chips; Samsung Semiconductor Inc.'s development of the OmniWave sound chip; Release of Phoenix Technologies Ltd.'s NoteBIOS...

  • EDN design ideas. Small, Charles H.; Swager, Anne Watson // EDN;2/2/95, Vol. 40 Issue 3, p99 

    Presents electronics design ideas. Includes the PSpice model of nickel-metal-hydride cells by Steven C. Hageman of Calex Manufacturing Co., Concord, California; Printer port precision analog I/O board; PAL universal ISA bus interface by Jerzy R. Chrzaszcz of Warsaw, Poland.

  • EDN design ideas. Travis, Bill; Swager, Anne Watson // EDN;7/4/96, Vol. 41 Issue 14, p93 

    Discusses several electronic designs. Voltage-to-frequency converter; Verification of the existence of one high bit in a word; Shock-sensor circuit; Current-source and sink-circuits; Plug-and-play capability of connectors.

  • Have you ever had one of those days? Maxfield, Clive // EDN;9/02/96, Vol. 41 Issue 18, p111 

    Offers tips on how to design the logic for changing a master clock signal into three subclocks. Includes the development of the waveforms that include the master clock which seemed to drop out naturally at six times the frequency of the phase clock; Adding of the binary values of the phase...

  • EDN design ideas. Travis, Bill; Swager, Anne Watson // EDN;09/12/96, Vol. 41 Issue 19, p183 

    Presents ideas related to electronic design. Includes the design of a simple echo-sounding device (ESD) test gun to test the effects of ESD through sensitive integrated circuits; Design of a dual-polarity amplifier with digital control; Design of a programmable ramp generator with 14-bit linearity.

  • EDN electronic design automation.  // EDN;02/03/97, Vol. 42 Issue 3, p246 

    Presents information on electronic design automation in several electronic companies in the United States. Enhanced software design by MicroSim Corporation; Mixed simulator improvements by Deutsch Research; Software integration by Mentor Graphics.

  • Digital position encoder does away with ADC. Travis, Bill; Cossio, Jose Carlos // EDN;05/08/97, Vol. 42 Issue 10, p128 

    Describes the design of a simple digital potentiometer-position encoder that converts change in resistance of a potentiometer into a digital value without using a converter. Use of an independent resistor-capacitor oscillator that drives an eight-bit counter; Selection of the right component...

  • Divide and conquer: Binary division. Maxfield, Clive // EDN;05/08/97, Vol. 42 Issue 10, p163 

    Describes how to carry out binary division using low-level instructions. Procedure on how to perform long binary division in decimal; Four cycles of the four-bit division test case; Assembly language designed for the virtual microprocessor implemented in software; Division of a 16-bit dividend...

  • EDN Electronic Design Automation.  // EDN;06/05/97, Vol. 42 Issue 12, p192 

    Presents information on electronic design automation. Improvement made to Release 1.1 of Statemate Magnum's interface; Details on an analysis tool by Design Acceleration Incorporated for submicron design; Information on a testbench-modeling tool.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics